What Does Dc Mean On Samsung Washer


Samsung Washer DC Error Code – How To Fix It?

NOTICE: This post may include affiliate links, which means that if you click on the links and make a purchase, we will get a fee at no additional cost to you. DISCLAIMER: It’s possible that if you have a Samsung washing machine, you’ll receive a DC code error message when attempting to run a load of laundry. Fortunately, a DC code mistake is almost always a simple repair! If your Samsung washing machine displays the DC code problem, it means that the washer is unable to spin because of a load imbalance.

Read on for answers to the most prevalent reasons of a DC code error, as well as suggestions for how to resolve the issue.

Balance the Load

The majority of the time, changing the weight of the things already in the washing machine will address the DC error code problem. Unbalanced loads are frequently caused by the following factors:

  • Bedsheets, comforters, and towels are examples of bulky things. Jeans, sweaters, and coats are further examples of big and undersized loads.

If you receive a DC code problem, look for one of the frequent causes listed below. Try balancing the object around the spin barrel if it is unevenly balled up in one location if you have a large number of hefty things to move about. As an example, if you are moving a load of heavy objects such as towels around a barrel, attempt to move the towels in a way that uniformly distributes their weight. Finally, make sure that no large or bulky materials are twisted around the spin barrel, since this might cause the spin barrel to become stuck, resulting in a DC code being generated.

  • If it doesn’t work, try eliminating a couple of the things from the list.
  • You should make sure that your load is not too huge for your washing machine if you’re washing a standard load of clothing that does not contain any bulky or heavy things.
  • In the end, while washing a single item (or a small group of things), the power of the spinning action may cause the objects to clump together in a single spot in the washing machine’s wash tub.
  • Consider adding a towel to the mix to help balance the burden.

Level the Washing Machine

If weight redistribution does not cure the DC error code, it is possible that the washing machine is not level in its original position. Depending on the circumstances, the system that detects the machine’s leveling may provide a warning to the operator. Make sure the washer is resting on a flat, level surface before starting. Check the surface of the washer using a leveling tool to ensure that it is level in all directions, if you have one available. Instead of a leveling tool, you may use a glass of water or a measuring cup with lines to test if the water sits level on top of the machine if you don’t have one handy.

If the washer shakes, a spin cycle will almost certainly result in a DC code issue.

Once you’ve tried everything else, determine whether or not your space will enable you to relocate your washer.

Choose a corner of your washing machine in which your surface is at its lowest point (assuming it is uneven), then rotate the leg counterclockwise to elevate it.

The DC fault code may not be resolved by altering the leveling of the machine; instead, it may indicate that internal components of your device are deteriorating. Fortunately, there is a simple solution to a frequent problem!

Check the Suspension Rods

Samsung washers are equipped with drum suspension rods, which may become brittle and break over time if not properly cared for. A typical reason for a DC code error to occur is a suspension rod that is defective or badly damaged. Fortunately, this is a low-cost and straightforward solution! If you believe that your suspension rods may need to be replaced, you may place an order for the necessary components online through Samsung or a third-party seller. A whole set of four suspension rods may be purchased for less than $100 on the internet, which is certainly less expensive than hiring a specialist.

  1. Unplug the machine from the wall outlet. Remove the control panel, which is held in place by two Phillips head screws. Disconnect the two wire harnesses that are already in place. Unscrew the holding clips using a flathead screwdriver (or another flat instrument) to release them. Lift the lid and use a clamp or a big object to fasten it in a safe and secure manner
  2. And Remove a single rod by lowering it to clear the upper mount (do NOT attempt to remove all four rods at the same time and replace them all at once)
  3. Reduce the length of the rod till it clears the bottom mount
  4. Remove the rod and place it somewhere safe. Excess grease from the interior components should be wiped away using a shop cloth or a towel. Make sure that the new rods have a thin layer of silicone grease applied to them where they will come into contact with the current machine mounts
  5. One end of the rod should be inserted into the bottom mount. Raise the opposite end of the rod and insert it into the higher mounting bracket. Check to see that the rod is securely fastened in place. Repeat the same for the other three suspension rods. Using your object to move out of the way, remove the clamps from the washing machine lid to lower the lid. Reconnect the two wire harnesses that were disconnected. Replace the control panel and fasten it with the two Phillips head screws that were previously installed. Activate your washer’s nozzle
  6. Try a new load of laundry to see how it goes.

If your DC code problem has been addressed, congratulations! If the code continues to show, it is possible that a repair may be required that is more involved than a simple DIY remedy.

Contact a Professional

If attempting to redistribute the weight of a load of laundry does not resolve the DC code error that your machine is producing, and if you are confident that your machine is level, and if you have tried replacing the suspension rods, the problem may be related to other internal components of your machine, such as the motor or the drive train. Depending on the situation, it may be preferable to contact a service expert to inspect your equipment. This, however, is likely to cost several hundred dollars, so make certain that you really need the technician before hiring him or her.

In both weight redistribution and leveling, be sure to mention your troubleshooting attempts.

Samsung’s online chat platform is open 24 hours a day, seven days a week.

Samsung Washer DC Error Code [FIXED] – KCSCFM Repair

Unbalanced loads cause Samsung Washer DC Error Code to be shown, indicating that the Samsung Washer is unable to rotate the clothing properly. Some of the garments may be removed from the Samsung washer and repositioned equally throughout the Samsung washer, which will correct the problem completely. In terms of washers for domestic use, Samsung provides a diverse selection that includes everything from top-loaders to front-loaders and even high-efficiency models. Even though the Samsung Washer includes a built-in balance sensor that determines whether there is an uneven load, the DC code can be triggered by something other than an unequal load on occasion.

The methods below will show you how to troubleshoot the Samsung Washer DC Error Code. in order for your garments to get cleaned

What Does DC Mean On A Samsung Washer?

As soon as you receive the dreaded DC code error notice on your Samsung washing machine, you begin looking for information on how to resolve the problem. During a load of washing, the error is presented as follows: the drum will not spin and will sometimes emit a beeping noise. Fortunately, the remedy is straightforward. DC faults are primarily caused by an imbalance in the load or an excessive amount of weight in the washer. Most of the time, this occurs when there is an imbalance in the load within the washer and one of the washer’s shock absorbers has to be repaired.

Before calling for assistance, you may attempt a few steps to troubleshoot your washer on your own.

Remove the washer’s plug from the wall outlet.

Check to see whether the issue reappears after restarting the washer.

You might be interested:  How To Watch Amazon Prime On Samsung Tv

How To Fix Samsung Washer DC Error Code

The following problem code may appear on the front panel display of your Samsung washer while you are washing clothing. It will be followed by a sequence of beeping sounds. The following factors may contribute to these malfunctions:

Balance The Load

If you’re receiving an error code “DC,” try rearranging the things in your washing machine to see if it helps. If you have a top-loading washer, you can use this method. Bulky goods, including as bed sheets, comforters, and towels, should be placed towards the bottom of the machine to avoid overloading the machine. The middle rack should be reserved for heavy items such as jeans, sweaters, and jackets, while the top rack should be reserved for lightweight items such as undergarments, socks, and towels.

  • Bulky materials, like as bedsheets, comforters, and towels, are the most prevalent sources of imbalanced loads, and they are the most easily avoided.
  • Loads that are too large will not produce satisfactory washing outcomes.
  • First, examine the load to see whether there are any objects that weigh more than 15 pounds.
  • For goods that are extremely thick or stiff — such as towels – spread them out across the barrel to ensure that their weight is adequately distributed over the whole barrel.
  • By rearranging your garments while they are being washed, you can reduce the likelihood of them being twisted in the washing machine.
  • If you’re washing a large load of clothes that are particularly heavy, you might want to consider redistributing the load throughout the spin barrel.
  • If they’re still too heavy for your machine, take out a couple more items from the mix.
  • With Samsung washers, you can wash up to 8 kg/17.6 lbs of laundry at a time, which is impressive considering the size of the machine.
  • It is possible that the centrifugal force generated by the spinning motion will cause a single or small number of items to become entangled while being washed.

This is referred to as “balling up.” If this occurs, a Samsung Washer DC error code will be displayed on the display panel of your washer’s control panel. Add a towel to the mix to fix the problem. This will help ensure that the clothes are evenly distributed throughout the load.

Level The Samsung Washer

However, if the problem remains after attempting this way, make sure that the Samsung washing machine is leveled in all directions before moving on to another option. The first step to determine whether or not the water in your washing machine is level is to place a glass of water in the machine and examine whether or not the water sits level. If the water sits crooked and shakes somewhat, the washer will tilt to one side as well, resulting in the Samsung Washer DC Error Code being shown on the screen.

  1. If it isn’t, make the necessary adjustments to the legs.
  2. In the event that your washer is unable to maintain its level, consider relocating it closer to a wall or other sturdy structure.
  3. If your washing machine does not balance properly on an uneven surface, you have a couple of choices.
  4. Because it is immediately attached to the leg and is easy to access, the corner peg will be the most straightforward to modify of all.

Worn Out Suspension Rods

When the “DC” error code appears on the display of your washing machine, it’s critical to figure out exactly what went wrong. Often, the problem is not with the washing machine itself, but rather with the suspension rods that hold it together. These rods are responsible for holding the washing machine in place while it is spinning and shaking forcefully throughout a cycle; if they are broken or bent out of shape, they will prohibit the device from functioning as it is intended. Vibrating washers are most often caused by damaged suspension rods, which may be easily repaired.

The rod should be changed if it seems to be noticeably bent or if it does not return entirely to its previous position.


Try changing the amount of garments in your load, or emptying some of the things if you are experiencing Samsung Washer DC Error Code. Check to see that the Samsung washing machine is level and, if required, replace any damaged suspension rods that may have occurred. If none of these suggestions work, call a repairman for assistance.

Samsung Washing Machine Displays Error Code DC – How To Clear Error?

Is the error code DC or UE displayed on the display of your Samsung washing machine? The presence of either of these error codes on the display of your Samsung washer while you are running a wash cycle indicates that you have an imbalanced load. Not a major error number, it just indicates that there is too much clothes in your washer or that it has piled on one side, resulting in an unbalanced load as a result of the excess clothing. It is possible that you have bed sheets or towels in the washer, and that there are either too many sheets or towels in the washer, or that they have made their way to one side of the machine, causing the washer to inform you that you have an imbalanced load.

  1. Here’s what these two separate but related error codes DCUE signify in plain language: SAMSUNG DISPLAYING THE DC ERROR CODE:When your Samsung washer is unable to spin due to an uneven load, the DC error code will appear on the display of your washer.
  2. When both of the DCUE fault codes are shown simultaneously, it indicates that you have an imbalanced load and that the WASHER WILL NOT SPIN as a result of this.
  3. (Not having a swath of garments on one side of the body) Once you have removed some items from your Samsung washer or re-distributed the laundry load, you should do the following: CLICK ON THE START/PAUSE BUTTON TO DISPLAY THE ERROR.
  4. If you require assistance or are experiencing problems with the DC or UE error codes on your Samsung washer, please submit a query in the section below and we will be pleased to assist you.

As the author and developer of this website, Allen works as a Home Maintenance and Appliance Technician. He has 33 years of expertise troubleshooting and repairing a wide range of household appliances and electronic devices. Please get in touch with us here.

What is DC error in Samsung washing machine?

A SAMSUNG DC ERRORCODE is shown on your washer’s display when your Samsung washer is unable to spin as a result of an uneven load on the spinner drum. In the case of a Samsung washer, the UEerrorcode indicates that the laundry load is imbalanced and, as a result, cannot spin. DC error code on a Samsung front-loading washer The Adc error code on yourSamsungfront-loadwasher indicates that the load is uneven and the washer will not spin. Second, what exactly does the term “Samsung washing machine” mean?

How to Reset a Samsung Washing Machine is described in this section.

(Unplug the washing machine from the wall outlet or turn off the washing machine’s circuit breaker in the breaker box.) What is the best way to troubleshoot my Samsung washer?

  1. Ensure that the fuse is intact or that the circuit breaker is reset Ensure that the drain hoses are straight. Remove kinked hoses from the system. Identify and troubleshoot any drain obstructions that may exist. Close the door and hit the Start/Pause button on the remote control
  2. Because it is for your protection, your washer will not tumble or spin unless the door is completely closed.

Samsung washing machine DC error: How to easily fix the different DC error codes?

The most recent update was made on:

Samsung washing machine DC error is quite common and it is likely that you may come across this error. Read on to learn how you can fix the different DC errors.

Samsung’s top-loading washing machines show a variety of different error or fault codes to inform consumers of potential problems with the washing machine, according to the manufacturer.

Samsung washing machine DC error

In a Samsung washing machine, the DC error alerts the user that there may be a problem with the machine’s door. The majority of the time, the problem is not with the gadgets themselves. However, a significant percentage of consumers tend to operate their washing machines in a negligent manner, particularly when it comes to opening and closing the washing machine door. In addition, read |How To Clean Your Washing Machine With Disinfectants When There Is A Coronavirus Pandemic?

DC error in Samsung washing machine – Different errors

There are several instances in which Samsung washing machines will indicate a DC fault with the letters DE or Door, which may or may not be complemented with digits. The following is an example of how the probable Door faults will appear on your Samsung washing machine – DC, DC1, DC2, or DC3. Occasionally, the DC error codes will be shown as DE instead of DC in certain Samsung washers. Also Check out this article |Escobar Fold 2 or Samsung Galaxy Fold With Golden Skin? Marques Brownlee reveals the details of the scam

Samsung washing machine DC error fix

A DC code appearing on a Samsung washing machine may result in a variety of technical challenges, including problems shutting the hatch, the main door not unlocking if an error flashes at the conclusion of the washing cycle, and the washing machine closing but not locking. Look at what a certain error number on a computer means and how to resolve it in the next section of the article. Also Read |What Is The Meaning Of The IE Error In The Washing Machine? Learn how to fix the IE error code on your LG machine.

DC – The door is open

When this error message appears, you must double-check that the door has been closed properly.

Also, check to see if any laundry has been entangled in the door, which can also result in this mistake.

DC1 – The Main Door lock/unlock is not working properly.

When a DC1 error occurs, turn off the washing machine and start the cycle over from the beginning. Alternatively, if this does not resolve the problem, Samsung suggests that you call 1800 40 7267864 (toll-free in India) for more support.

DC3 – The Add Door lock/unlock is not working properly.

You should just switch off the washing machine and start the cycle again if you receive a DC3 error message. If the issue continues, you should contact the customer service department at 1800 40 7267864 for more assistance. Depending on how the machine behaves, the problem might be something minor or even tough at times, necessitating the need of a professional repair service; nonetheless, the troubleshooting steps outlined above should resolve the majority of the DC faults. |1E Error in Samsung Washing Machine: How to Resolve 1E or IE Error Code|

You might be interested:  How To Unlock Samsung Fridge

Published for the first time:

What Does DC Mean On Samsung Washer? 3 Easy Ways To Fix These!

Do you know what the DC symbol on your Samsung washer means? When you receive a DC error on your Samsung washer, it implies that your washer is not spinning properly owing to a balancing issue, and you should unload some balance when this occurs. Generally speaking, this DC fault is standard, and if you operate your washer with care, you will be able to eliminate it. The DC error is most commonly seen when the number of clothing in your washer exceeds the capacity of your washer. This DC fault notifies the user that there is a problem with the washer load or the machine door.

So, friends, don’t be concerned; simply read this article through to the conclusion to find a solution to your problem.

What Does DC Mean On Your Samsung Washer?

So, what exactly does DC stand for on a Samsung washer? What does DC stand for on Samsung washers will be explained in the next paragraph. Sometimes people overfill their washers, causing the spin cycle to run more slowly than usual. The spinner of the washer works slowly as a result of the large amount of laundry in the washer; moreover, when you add more laundry to the washer, it produces a door issue as the door of the machine snags the clothing and the door does not shut correctly. When this DC error occurs, make sure that the washing door is closed properly and that no garments are caught between the door and the washer.

Some people may not take this seriously, and this is understandable.

During the winter, people are more likely to make this sort of mistake because of the heavy clothing and household items such as blankets, comforters, bedsheets, and bedsheets.

This error might potentially be caused by a problem with the water level.

When the water level in the machine is high but the number of clothes is low, the machine operates smoothly; however, when the water level is low, the spin cycle is slowed and becomes more complicated, which may result in this DC fault.

How To Fix The DC Error?

By removing part of the balance from your washer, you may immediately resolve the DC error problem. Simply remove some of the heaviest items of clothing, such as pants, jackets, and sweaters. Winters are often difficult for washing, which is one of the reasons why these dc problems occurred throughout the winter. Follow the actions outlined below to resolve this issue:

1. Balance the laundry

Switching off your Samsung washer will resolve the DC problem. Once the Samsung washer has turned off, remove some of the heavier clothes from the machine, such as denim jeans. Jackets, sweaters, and blankets are all good options. Check to see if any clothes, such as towels or jeans, has been twisted around the barrel of the washing spin, which might also be a contributing factor to the DC issue. Learn how to get the ideal balance in your laundry room.

2. Level the washer surface

If the weight redistribution does not cure the DC mistake, it is possible that your Samsung washer is unbalanced in some way. First and foremost, you must ensure that your Samsung washer is placed on a smooth and level surface. In the event that you have a leveling tool, you can utilize these tools to level the washer surface. The level of your Samsung washer should be checked again if you are still unsure of the level, and it should be moved to a different level in order to resolve the DC error issue.

3. Suspension rods of Samsung washer

Damaged or defective suspension rods are another major cause of DC errors in Samsung washers, and they are often overlooked. It would be beneficial if you were forced to repair these suspension rods for the sake of your Samsung washer’s health. When it comes to suspension rods, certain technical specialists specialize in them solely, so consult with them if your suspension rods are damaged.

How To Stay Away From DC Error?

First and first, verify the standard of your Samsung washing machine; it is possible that various Samsung washers have varied weights; thus, if you operate your washer in accordance with the standard of your washing machine, you will be able to eliminate this error code. If the entire weight of your washer is 5kg, you should fill it by 4/5 of that weight. This is because when you enter clothing into your washer, they get wet and double in weight, which causes your spinner to slow down. Never make a purchase based on a size.

Try to maintain your washer clean and level by placing it on a level surface whenever possible.

Double-check the volume of water and the number of clothing in your washer, as well as the main door of your Samsung washer, which may potentially be a contributing factor to the DC issue.

It’s A Wrap!

You are having a good time reading this content. I hope you find this post interesting, and we are delighted to clarify what DC stands for on a Samsung washer.

Friends, thank you for sticking with us all the way to the finish, and we hope you’ve gained a thorough understanding of the procedures outlined in this post. Also, learn what the F28 code on a Whirlpool washer indicates, as well as what the LE code on an LG washer means.

How To Fix Samsung Washer Error Code “DC”?

Samsung washers may display the errorcode”DC’from time to time, which indicates that the load in the washer is not evenly distributed. It is possible that the washer may cease working correctly as a result of this problem and will be unable to spin the clothes. When this problem occurs, the error message “dc” is shown on the washer’s display screen. Error code for the DC

What causes the washer Error Code “DC”?

There might be a variety of factors contributing to this inaccuracy, and some of the more compelling are stated below.

  1. There are either too many or too few items in the washing. It’s possible that clothes were heaped up on one side
  2. It is possible that the washer is imbalanced or that it has been put on an uneven surface. Most likely, a section of the Washer is broken

Pre Tips

As soon as you see the DC error number on your washer’s display, the first thing you should do is investigate the solutions suggested below.

  1. Remove your washer’s plug from the outlet
  2. 15 minutes should be plenty time. Plugging the switch back into the socket will restart your washer.

If you follow the steps in this approach, you should not have any errors. Automatically Resolve PC Problems If you want to get your PC-related difficulties corrected automatically, as well as diagnose, list, and correct any registry mistakes, we propose that you try utilizing theRestoro Repair Tool, which can simply handle all of this with a single click on your computer’s keyboard. The Trustpilot rating is excellent, so you don’t have to be concerned about anything else.

What to do if you get the Samsung Washer DC code?

This inaccuracy can be caused by an unequal distribution of clothing. As a result, to correct the problem, follow the actions outlined below.

  1. Make a new distribution of the garments in the tub and begin the cycle again. In case the machine’s weight limit has been surpassed, remove any more clothing before continuing the cycle. Single-item loads should have one or two articles of clothing added. To erase the issue, use the start/pause button on your keyboard.

Check to see if the DC error has been removed from the display.

Solution 2: Check for Damaged Parts

This error can be caused by the presence of a broken component, and you can prevent it from occurring by following the procedures given below.

  1. Remove the washer from service by removing the switch from the socket. The top panel of the washer should be removed. Make sure there is no damage to the damper shock or suspension spring. If they are damaged, they should be removed and replaced with new ones. Reconnect the washer and turn it on again.

The washer’s display should be checked to determine if the mistake is still present.

Solution 3: Level the Washer.

The washer should be leveled before use; otherwise, it may cause the DC error, which may be resolved by following the instructions outlined in the following section.

  1. Remove the washer from service by removing the switch from the socket. A flat surface should be used to ensure that your washer operates properly. Placing an abubble level on top of your washer will allow you to check its balance. If the washer’s legs aren’t balanced, adjust the washer’s legs. Remove the lock nut from the leg that has to be adjusted
  2. Rotate it in either a clockwise or counterclockwise direction to lower or raise it. Tighten the lock nut down tightly. Check the balance of the bubble by placing it at the same level as before. Connect the washer to the power source and turn it on.

The washer’s display should be checked to determine if the mistake is still present. For further information and specifics, please see the following link. Contact the Samsung Customer Support Center if you have any questions or concerns.

What does code DC mean on Samsung washer?

THE SMART WASHER DCERRORCODE: TheSMARTWASHERDCerrorcodeis displayed on your washer’s display when your Samsung washer is unable to spin due to an uneven load. DCUE errorcodes work together to inform you that you have an uneven load, and as a result, theWASHERWON’T RUN. Adcerror code on yourSamsungfront-loadwasher indicates that the load is imbalanced and the washer will not spin properly. In some cases, just redistributing an imbalanced load or adding a couple of garments to a tiny or single-item load can suffice to resolve the problem.

Instructions on how to repair an unbalanced washing machine

  1. Step 1: Determine the current level. Place a straight level on top of the washing machine to determine how far out of balance the machine is from being balanced
  2. Step 2 – Bring the legs up to the same level. The majority of washing machines are equipped with height-adjustable legs in the front and back. Step 3: Tighten the drum
  3. Step 4: Keep large items out of the drum.

Specifically, how can you reset a Samsung washing machine in this case? You may simply disconnect the washing machine from the power source for 5 to 10 minutes in order to reset your Samsung washing machine. (Unplug the washing machine from the wall outlet or turn off the washing machine’s circuit breaker in the breaker box.) I’m having trouble figuring out how to utilize the self-cleaning cycle on my Samsung washer.

To use the TorunaSelf Clean cycle, make sure the washer is completely empty before pressing the Self Clean button and then Start. If residue or suds are detected following a Self Clean cycle, we recommend that you conduct another Self Clean cycle immediately after.

How to Fix Samsung Washer DC Code

Do you have a Samsung washing machine in your house or apartment? If this is the case, you may have noticed an error code that reads “DC.” If you are receiving a DC error number on a regular basis, you may be asking what to do. Fortunately, repairing a DC code issue is a rather simple process. What does this signify, and how do you go about correcting it? It is essential that you keep a number of vital considerations in mind.

You might be interested:  How To Connect Samsung A10e To Tv Using Hdmi

What Does a DC Error Code Mean?

This indicates that the Samsung washing machine is unable to spend effectively and displays a DC error code when this occurs. Because the load in your washing machine is not evenly distributed, it is unable to spin. In order to remedy this DC code problem, you just must redistribute the weight of the current loan, which is a straightforward process. Examples include the ability to remove current things from the washer, lower weight in the washer, or even rotate the suspension rods that are responsible for absorbing the shock.

A DC Code Error: Balance the Load

Most of the time, a DC code problem on your Samsung washing machine may be resolved by just redistributing the things currently in your washing machine’s wash basket. Your washing machine is not correctly balanced since certain clothing items weigh less than others, causing it to overflow. Bulky things such as towels, comforters, and bedsheets, for example, are likely to weigh significantly more than underwear and socks. It is possible that you may need to reposition bulky goods such as coats, pants, and sweaters in order to more equally spread the weight of your load.

  1. Examine the area to see if there is anything unusually bulky, such as a comforter, that has been rolled up in a corner.
  2. It will be more suitably balanced in this manner.
  3. An error in the DC code might also occur if anything becomes entangled around the spin barrel.
  4. Check to see that the spin barrel has not become entangled in any manner.

Remove a Few Items from the Washing Machine

If you have properly redistributed your products and are still experiencing DC code errors, you may want to consider eliminating a couple of them. If your products are appropriately distributed, it is possible that the problem is just that the washing machine load is simply too large. If the motor is unable to spend, eliminate a few elements from the equation. Your washer will have an easier time spinning as a result of this. Keep in mind that Samsung washers have quite large capacity for the size of the machine.

When this occurs, the spin Barrel becomes unable to revolve, resulting in a DC code error. You’ve encountered a different Samsung washer problem number and are seeking for assistance? Read on. Take a look at our guides:

  • Learn how to fix the SUD code on your Samsung washer, as well as the UE code on your Samsung washer. How to Resolve the UB Code on a Samsung Washer
  • How to Resolve the Samsung Washer E2 Error
  • How to Resolve the Samsung Washer D5 Error

Error Code DC: Check the Suspension Rods

Even if you’ve done everything and you’re still getting a DC code error, the suspension rods might be the source of the problem. Every Samsung washing machine is equipped with a pair of rods for suspending the drum. These suspension rods will endure some wear and tear over time as a result of the various washing machine loads they will get. The suspension rods on your vehicle must be changed if they are defective, damaged, or worn out. If you have to replace one of them, it’s likely that you’ll have to replace them all at the same time.

The directions in this video may be sufficient for you to change the suspension rods on your Samsung by yourself if you follow them.

This way, you can be confident that the problem has been appropriately treated the first time.

Fix Your Samsung Washing Machine

If you are seeking for a solution to remedy the DC error code on your washer before the next spin cycle, consider the following do-it-yourself repair suggestions. When you open the washing machine door, you won’t have to worry about your clothing being out of balance since they’ll be balanced. Remember, if you have any questions, you can always contact a professional appliance service to find out more information!

The most common failures of Samsung washing machines – Coolblue

Written by Rowan at 17:48 UTC on March 31, 2021. When you turn on your Samsung washing machine, you notice an error message. In the case of a washing machine malfunction, for example, the water supply or drainage may be affected. Of course, making a mistake is quite inconvenient. Fortunately, the majority of Samsung issues can be resolved. In this post, you will learn about the most often seen error messages.

Samsung malfunction 1E or 1C

The error code 1E or 1C on your Samsung washing machine’s display means that something went wrong. If this is the case, there is an issue with the water level sensor. This indicates that the water pressure or the water level are not at the proper levels. Before anything else, make sure that the washing machine is correctly linked to the water supply system. It is possible that the supply pipe is blocked or kinked. If this is the case, the kink should be removed. It may be necessary to switch the machine off and on again from time to time.

Samsung malfunction 3E or 3C

The motor does not operate when the error message 3E or 3C is shown. As a result, check to see if the socket is operational first. Remove the plug from your washing machine once it has been turned off. Check to see whether any other devices are receiving electricity. Another possibility is that the washing drum is overflowing, which would result in the problem. If the issue warning still shows after removing some clothes from the drum, try restarting the software to see if it goes away. Does this not appear to be of assistance?

Then reconnect it and check to see whether the error code has been eliminated.

Samsung malfunction 4E or 4C

Message indicating an error The presence of 4E or 4C implies that there is an issue with the water distribution system. This indicates that either no water or too little water is entering the drum. To ensure proper operation, ensure that the water tap is fully open and that the supply hose is securely attached. Check to see if the faucet in your bathroom or kitchen is functional.

If this is the case, there is insufficient water pressure and you will have to wait. Examine the supply hose to see if there is an obstruction or kink in the hose. In severe circumstances, such as when your washing machine is in the shed, the water line may get frozen.

Samsung malfunction 5E, 5C or E2

Error codes 5E, 5C, and E2 indicate that the water cannot leave. There are a variety of factors contributing to this. It is possible that the drain is clogged or that there is a kink in the line. You may find instructions on how to unclog the drain of your washing machine in the article below. The drain filter cover is located on the front of the vehicle, at the bottom right corner. When you open this flap for cleaning, be sure to lay a towel down first just to be safe. Is your washing machine tucked away in a shed?

Samsung malfunction HE, HC or CE

The HE, HC, or CE error codes flash on the screen. If this is the case, a problem with the washing temperature sensor has occurred. When the water temperature in the drain is higher than 50 degrees Celsius, this occurs. For 30 minutes, turn off the washing machine and unplug it from the power source completely. Check to check whether the error code is still there after reconnecting the device. It is also possible that you will receive the error codes rE1, 4E2, H1, 4C2, or E8 as a result of this problem.

Samsung malfunction UE, E4 or Ub

It is not possible to complete the spin cycle when the error codes UE, E4 or Ub occur. It’s possible that the washing machine isn’t properly balanced. Ascertain that the washing machine is situated on a level and stable surface. It is also critical that the drum does not get overloaded. When filling the drum, there must always be enough room for one fist to fit within. Finally, check to see that the laundry has been spread equally. If so, does your laundry hang out on one side of the drum? If that’s the case, please redistribute this.

Other malfunctions

Is your washing machine emitting the codes dE, dE1, Ed, dC, DC1, or DC? Do you know what these codes mean? Otherwise, the door is still open, and you must close it before proceeding. Inspect the door to see if there is any washing in it. Does the code DDC display on your AddWash washing machine if you have one of these machines? If this is the case, you must first hit the pause button in order to access the additional AddWash door. Are there any problems with your computer that are not included in this article?

Didn’t fix the problem?

You’ve done everything you can think of, but your washing machine is still not working. If this is the case, it is possible that a technician will be required. Not every problem can be resolved in a stand-alone manner. Is your washing machine a Coolblue product, and is it protected by the manufacturer’s warranty? If this is the case, please contact our customer support. Is your washing machine no longer covered under warranty? If this is the case, contact Samsung. Coolblue was not the retailer where you purchased your washing machine.

Did this help you?

Optional We will only use your input to enhance the website, and we will not react to any of your comments.

This article was written by:Rowan, a washing machine expert.

Leave a Reply

Your email address will not be published. Required fields are marked *