Samsung Galaxy S7 How To Remove Battery

Contents

Fix your smartphone or tablet yourself

Level:Medium Time: 25 minutes The author, Alexandre, has helped 3190 others complete this repair successfully! Why shouldn’t you? The battery life of your Samsung Galaxy S7 leaves a lot to be desired, don’t you think? The moment has come to take action if you’re tired of needing to recharge your smartphone three times a day. Our technicians at SOSav have put together this repair guide to show you precisely how to replace the battery in your Galaxy S7 by yourself, with with step-by-step instructions and illustrations!

Problems:

  • Battery that is overinflated
  • Battery that has a limited or no life
  • Charging issues

Here’s some advise before you get started.

Step 1

Before you can begin replacing the battery in your Galaxy S7, you must first switch off your phone for obvious safety reasons. This may be accomplished by pressing and holding the off button for a few seconds before selecting “turn off.”

Step 2

As seen above, insert the SIM/micro SD card tray opening tool into the hole on the top edge of your phone, which is located on the right side. Then carefully insert the tool into the hole.

Step 3

Once you get the MicroSD/SIM card tray out of the way, you may close the door.

Step 4

To begin softening the adhesive on the back panel, heat it using a heat gun. The glass back panel has a small bend to it and is securely fastened. Make sure to pay close attention to the corners of the glass if you’re using a hairdryer. Please do not be afraid to restart if you believe that you have not been able to unstick it. Lift the glass just enough to allow you to put an opening pick between the frame and the back panel, using the suction cup to help you. Then drag the opening choice around the entire screen to the left or right.

Step 5

The opening pick should be moved around the whole back panel to verify that it is totally unstuck and can be raised. After that, begin to raise the panel. Please do not hesitate to reheat the back panel if it is not readily removed the first time.

Step 6

Now that the rear panel of your Galaxy S7 has been entirely removed, you may put it back together. If it is damaged, it should be replaced.

Step 7

Remove the 12 screws that hold the internal frame of the phone together with a cross-headed screwdriver, as seen in the image above, which has been circled in red.

Step 8

Pulling up the top of the frame with the nylon spudger is the next step.

Step 9

Then, using the nylon spudger, carefully pull the middle part of the frame out of the way.

Step 10

The pointed end of the spudger should be used to pry back the gold adhesive that is sandwiched between the bottom of the frame and the battery.

Step 11

Then, using the pointed end of the spudger, raise the bottom of the frame up and away from you.

Step 12

After that, remove the battery connector by unscrewing it.

Step 13

Heat the glue below the battery for a few seconds using a hair dryer to make it more pliable and less sticky.

Finally, using the flat edge of the spudger, push the battery out of the way. Take care not to overheat the battery, since this might cause it to malfunction.

Step 14

Lifting the battery up to its maximum length will unfasten it. Your Galaxy S7’s battery has been taken from the device.

Step 15

Your Galaxy S7’s battery has now been totally removed from the device. If it is no longer functioning properly, you can now replace it.

How to Replace the Galaxy S7, S7 Edge Battery Replacement

The month of May|the 16th of March, 2016||22Home»TUTORIAL» Instructions for replacing the battery in the Samsung Galaxy S7 and S7 Edge The Galaxy S7 and S7 Edge, which serve as Samsung’s 2016 flagships, have larger batteries than the Galaxy S6 and S6 Edge, which served as the company’s 2015 flagships. As previously stated, the Galaxy S7 and S7 Edge batteries are non-removable, which means that they cannot be changed. In some circumstances, it is necessary to replace the battery in order to restore functionality to the device.

Tools Needed:

  • The following items are required: a heat gun or a hot plate machine
  • A metal spruce or an iSesamo tool
  • A plastic spruce or an iSesamo tool
  • A small Phillips screwdriver
  • Guitar picks/playing cards
  • Tweezers
  • And a pair of scissors.

How to Disassemble the Galaxy S7 for Battery Replacement?

When you take the SIM card tray out of the phone, you’ll see that it’s coated with a waterproof glue.

2. Remove theGalaxy S7 back cover.

After heating up the sides of the Galaxy S7 for 12 minutes, the back cover is attached to the rear casing with a waterproof adhesive that is somewhat sticky to the touch. Pay attention to this step and make sure the Galaxy S7 back cover glue is nicely heated and loosen before moving on to the next. Use a screen separator tool to gently lift the back cover a little bit, then carefully slide the plastic tip into the back cover and run it along the borders of the Galaxy S7 back cover to complete the process.

Be patient in the same way.

Be careful not to damage the fingerprint sensor located in the middle of the rear housing when heating the device.

3. Release the Galaxy S7 rear housing set.

Remove the 12 long screws that are located in the back housing. Because these screws are of the same size, there is no need to worry about them being mixed up. If the screws are still caught in the holes, you can remove them using a pair of tweezers. Removing the Galaxy S7 wireless charging chip and antenna module is a delicate process, so take care not to harm this delicate component. Remove the Galaxy S7 loudspeaker assembly by peeling off the yellow tape that was applied to it.

4. Pry up the connectors shown in below to release the Galaxy S7 motherboard.

There are three antenna cable connectors, a volume button flex connector, a power button flex connector, a home button flex connector, a front-facing camera connector, a rear-facing camera connector, an LCD assembly connector, a battery flex connector, and an ear speaker flex connector among the connectors on the device.

5.Release theGalaxy S7 battery replacement.

Heat the Galaxy S7 battery adhesive until it is pliable, then jam the metal spudger under the battery and pry it back and forth. You may also require a plastic playing card and a plastic spudger to assist in removing the battery from the phone.

The battery is fastened to the front casing with powerful adhesive in a square configuration, which explains why the battery is so firmly attached. Check out the video instruction below to learn how to disassemble the Galaxy S7:

How to Disassemble the Galaxy S7 Edge forBattery Replacement?

Check out the video guide below to learn how to disassemble the Galaxy S7 Edge.

You might be interested:  How To Connect Apple Phone To Samsung Tv

Visit ourYoutube channelto checkhow to reassemble Galaxy s7 and S7 Edge

  • Instructions on how to successfully disassemble the Samsung Galaxy S7 Edge’s screen
  • Learn how to disassemble and dismantle the Samsung Galaxy S7 in preparation for a screen replacement. What you need to know about replacing the Galaxy S7’s screen, charging port, and home button
  • How to Repair a Cracked Screen on a Samsung Galaxy S7 Edge
  • Video Tutorial.

ReviewerMoralesReview Date2016-03-28 SummaryReviewerMorales Item that has been reviewed This is an excellent piece that will be of value to me. Author’s Reputation

How To Take Out Battery On Galaxy S7 And Galaxy S7 Edge

Those who possess a Samsung Galaxy S7 or Galaxy S7 Edge may be interested in learning how to remove the battery from their device. In the past, it was difficult to remove the battery from Samsung Galaxy smartphones; however, the new method will still allow users to remove the battery from their Galaxy S7 devices. The following are the steps to follow in order to remove the battery from your Samsung Galaxy S7 or Galaxy S7 Edge smartphone. As can be seen in Samsung’s instruction manual for the Galaxy S7, this should only be tried by “your service provider or an authorized repair agency,” according to the manufacturer.

The following are the procedures to follow in order to remove the Samsung Galaxy S7 battery: To remove the battery from your Samsung Galaxy S7, follow these steps:

  1. The Samsung Galaxy S7 should be turned off. The SIM card tray should be removed from the device. Remove the back cover from the book
  2. Remove the screws that are positioned around the perimeter of the apparatus. Remove the circuit board from the computer
  3. Disconnect the battery connector from the rest of the system. Remove the battery from the device.

The fact that techjunkie.com is not accountable for any damages that may occur to your phone during the removal procedure should not be overlooked. We recommend that you take your Galaxy S7 or Galaxy S7 Edge to a certified technician if you are experiencing any problems with your device. If your phone’s battery is causing you issues, you may get an external batterypack so that you won’t be caught with a dead phone in the middle of nowhere.

How to Replace Samsung s7 Battery [A Quick Guide + Tips and Tricks to Avoid Battery Issues]

Your battery’s charge is depleting at an alarmingly quick rate. Do you find yourself having to recharge your Galaxy S7 more than once a day on a regular basis? The following instructions will teach you how to remove the old, deteriorated battery from your S7 and replace it with a new one. Before you begin dismantling your phone, check to see if the battery has been depleted to less than 25% of its original capacity. If a lithium-ion battery that has been charged is accidently pierced, it can catch fire and/or explode, resulting in considerable property damage.

Please do not allow your phone to become too hot.

Wearing eye protection and proceeding with caution when dealing with swollen batteries is highly recommended.

Continue reading to find out more information!

What is the source of the rapid battery drain on Samsung’s Galaxy S7 smartphone?

After getting a huge number of reports concerning the problem, we decided to look into it more thoroughly. On the basis of our results, we devised a list of options that were successful in fixing the problem for the great majority of our users as well as enhancing their overall experience with battery depletion.

In addition, we collated and documented the many circumstances that had a role in the occurrence of the problem.

1. Bad Application:

It’s conceivable that a certain mobile phone program is consuming battery life by operating in the background and potentially utilizing the mobile phone’s data connection while doing so, according to the manufacturer. Additionally, if a specific program has a high quantity of cache kept on the device, it has the ability to deplete the battery very rapidly if used extensively.

2. Software that is out of date:

It is possible that your phone’s battery life will be reduced if the Android operating system on your device has not been updated to the most recent version since every application requires the most up-to-date version of the Android operating system for improved compatibility and enhanced capabilities. The effect is that running outdated software might cause some programs to use more battery life, resulting in the battery drain issue.

3. Outdated Applications:

Aside from outdated apps that have not been updated to the most recent version of the software, excessive power consumption and battery depletion can also be caused by a lack of maintenance.

As a result, all applications must be updated to themost recent versionsmade available by theirrespective developers.

In addition, utilizing a charging cable or an adapter that does not have the official Samsung mark may cause problems with the phone’s battery charge. When you use the charging accessories that are given by the firm, the phone charges the most effectively.

5. Cache:

Data that programs keep in order to minimize loading times and deliver a more seamless experience to users is referred to as the cache. However, an excessive quantity of cache might make an application slow and power-hungry, resulting in a larger than usual battery demand for that program. After gaining a fundamental grasp of the problem and its underlying causes, we may go on to explore potential remedies. Make careful that you apply these solutions in the particular order in which they are provided in order to avoid any conflicts with other solutions.

Instructions for replacing the battery in the Samsung Galaxy S7 and S7 Edge

It will be necessary to use the following tools:

  • Machine that employs a heat gun or a hot plate to generate heat the iSesamo Spudger/iSesamo Tool Spudger/Prying Tool in Metal Plastic Small Phillips
  • Metal Spudger/Prying Tool in Plastic Tweezers for screwdrivers Tweezers, guitar picks, and playing cards are some of the tools you’ll need.

How to Disassemble the Samsung Galaxy S7 in Order to Replace the Battery?

To begin, turn off the Galaxy S7 and remove the SIM card tray from it. Take note that when you remove the SIM card tray from the phone, it has been covered with a waterproof glue. 2. Take the Galaxy S7 rear cover off the smartphone and set it aside. After 12 minutes of heating up the sides of the Galaxy S7, the back cover is attached to the rear housing using a waterproof adhesive that is rather sticky to the touch. The back cover is removable. You’ll need to be patient during this phase, so make sure the Galaxy S7 back cover adhesive is heated and loose before continue.

  1. To remove the back cover from the back cover, you will need to heat the adhesive back and forth multiple times.
  2. Using the image below, you can see that the Galaxy S7 back cover has been carefully peeled away from a huge piece of extremely strong glue.
  3. Create an online store where customers may purchase the Galaxy S7 rear housing.
  4. As a result, there is no need to be concerned about them becoming mixed up because they are all the same size.
  5. Care must be taken not to harm the wireless charging chip and antenna module when removing the Galaxy S7’s wireless charging chip and antenna module.
  6. Remove the Galaxy S7 loudspeaker assembly.
  7. Pry up the connections on the Galaxy S7 motherboard as illustrated in the figure below to remove the motherboard.
  8. Heated a metal spudger under the Galaxy S7 battery and prying it back and forth until it becomes malleable is what you want to do.
  9. With powerful adhesive applied in a square arrangement on both sides of the battery, the battery is held in place firmly.

It has nine different connectors including three antenna cable connectors, a volume button flex connector (with three different types of buttons), an on/off switch (with two different types of buttons), an LCD assembly connector (with two different types of buttons), an ear speaker flex connection (with two different types of speakers), and two different types of buttons (with two different types of buttons).

Tips and Tricks for Avoiding Battery Problems

Here are various solutions for Galaxy S7 battery issues that will also work on the Galaxy S7 edge. Note that some of these solutions are not universal. Many of the techniques and features listed below can help you get the most out of any other Android devices you may have, independent of their manufacturer.

1. Disable Briefing

The Samsung Galaxy S7 and Galaxy S7 edge come pre-installed with an app called “Briefing,” which is designed to help you stay organized. When you swipe left on the home screen, you’ll encounter this app, which curates information from a variety of sources to give you with everything you need in one convenient location. Although it appears to be a valuable function, it is usually quite sluggish and unresponsive. It is inconvenient to use Briefing on your Samsung smartphone, and it has a negative influence on the battery life (and in certain circumstances, the performance) of your Samsung device.

Turn it off immediately!

  • Briefing may be turned off by holding down a long press on a blank space on the home screen. Now, swipe to the left to gain access to the Briefing section. To turn it off, press the button.
You might be interested:  How To Mount Samsung Tv

2.Alert yourself to the presence of applications that drain a significant amount of battery power. As much as we would want to believe that every app on the market is designed to be a good phone citizen and to make efficient use of your phone’s limited resources, this is not always the case. It is possible to determine what is wrong with your phone’s battery if you have a large number of applications installed and the battery is draining more quickly than you would like. Navigate to the phone’s settings, then to the Battery section, and lastly to the Battery consumption section.

It’s important to note that this is not an entire list of applications that are draining your power, and that not all apps will appear on the list if you use them regularly.

If you come across an application that is frequently acting inappropriately, you should consider removing it.

3.Minimize tethering:

Not only do the Samsung Galaxy S7 and S7 edge allow you to share your mobile connection with others, but they also have a new WiFi sharing capability that was previously unavailable. Even while all of this is incredibly amazing and handy when you need it, tethering quickly depletes the battery’s power. Tethering should only be used when absolutely required; it should not be left on for lengthy periods of time, especially if you need your device to survive longer.

4. Turn off location services:

It is only when we are using maps for navigation or any other applications that offer us with services or information based on our present location that we require location services to be enabled. When using such applications, it is relatively simple to allow location services; thus, it is recommended that you turn it off at all other times.

5.Examine the ‘App power saving’ settings.

In spite of the fact that you have identified and removed power-hungry applications from your phone, there are many additional apps that you would like to retain but that are still running in the background needlessly. In order to cope with this, the Galaxy S7’s”App power-saving”options, which can be located in the Battery area of your phone’s settings, are the most effective method available. Using App power saving, your phone will disable the ability of applications to operate in the background if you haven’t used them in more than five days.

When you first use the app, the counter will be reset and the app will be tuned once again for your device.

For example, you could want a travel utility, such as the American Airlines app, to be able to operate in the background to check for flight updates at all times, even if you don’t use it every five days.

6. Modify your Display settings a little bit.

Despite the fact that the Galaxy S7 boasts an industry-leading display that is really fairly energy-efficient, it will eat a large percentage of your battery over the course of a day. While looking through your phone’s display settings, you’ll see that there are a few various modifications you can make that will have no effect on how you use your phone while simultaneously saving a few percentage points on your battery. You might want to think about dimming the brightness of your screen by a smidgeon.

However, pushing the slider down will somewhat diminish the brightness in many situations, so keep it checked.

When your screen is switched off, it isn’t utilizing any electricity!

  • With the Always On Display feature turned off completely, you may save a significant amount of battery life. If you don’t mind not having information on your usually “off” display, you can save a few percentage points by turning off the feature completely.

Our final Thoughts

We hope that the suggestions above will be of assistance in addressing your Galaxy S7 battery life concerns. If you want to switch off all communications, you can always enable airplane mode with a single press on your phone’s screen. Create the practice of restarting your smartphone on a regular basis. This will help to fix a range of battery and performance concerns.

Frequently Ask Questions

The Samsung Galaxy S7 has a non-removable battery, which means it cannot be replaced. In order to remove or replace the battery, you need contact your service provider or a qualified repair agency. The warranty does not cover any damage or problems that occur as a result of the battery being removed without authorization. If you decide to replace your battery, bear in mind that you may incur additional expenses.

How much does it cost to replace the battery in a Samsung S7?

According to Samsung, the price has increased to 73$. In order for Samsung to repair your gadget, you must send it to them by mail.

Is the Galaxy S7 still a good buy in 2019?

While the Galaxy S7’s design is considered “classic,” and the home button is still present, the S7 does not make any sense in the year 2019. As an alternative, we propose the Samsung Galaxy S8, which boasts one of the most beautiful styles in the business, as well as specifications that will endure for a long time.

How to Replace Battery in Galaxy S7 – Ultimate Guide for Users

The Samsung Galaxy S7 (also known as the G930, G930F, and G930FD Dual) has a battery with a capacity of 3000 mAh and a working life of around a day and a half as part of the top-of-the-line and high-performance phone. If the gadget begins to operate for less than a day, if the percentage of charge level fluctuates, or if the device shuts down abruptly, the battery should be changed. In this repair tutorial, we will demonstrate how to replace the battery in your Galaxy S7 smartphone. This repair can assist you if your smartphone quickly runs out of power when under intensive usage, if you are unable to charge or switch on your phone, or if the battery life on your phone has expired or has been reduced.

Battery Replacement in Galaxy S7

Before beginning the repair, make sure that your Galaxy S7 is turned off and that the SIM card has been removed.

When replacing, it is important to exercise caution since negligent damage to internal pieces might result in the need for costly repairs.

Step 1

The following repair tools will be required for the repair:

  • An AA battery
  • A screwdriver set
  • A mediator
  • A spatula
  • Tweezers
  • FLUX-OFF liquid soiling remover
  • Clamps
  • B-7000 adhesive glue
  • And other miscellaneous items.

Step 2

Apply FLUX-OFF liquid (or a 50/50 combination of isopropanol and gasoline) around the perimeter of the rear cover to soften the inner adhesive, and then remove the back cover. It is possible that the operation will need to be done numerous times. Taking off the rear cover is the first thing you’ll need to do. The glass rear cover of the Samsung Galaxy S7 is attached to the phone’s metal chassis. Pulling the rear cover-up with a suction cup is recommended. Pre-heating the gadget with hot air from a hairdryer is recommended.

Insert a plastic pick into the hole created between the rear cover and the housing once it has been created.

To open each side of the smartphone, use more plectrums to pry it open.

Remove any adhesive residue from the interior of the case as well as the rear cover with care at this point.

Step 3

After that, loosen the 12 screws that hold the antenna wires and speaker to the casing and peel away the yellow tape that has been applied.

Step 4

Disconnect the top antenna from the casing at this point. Begin in the upper right corner of the screen. Once the antenna cable has been detached from the right side, gently pull it in the middle to ensure that the wire is unplugged from the left side as well.

Step 5

Remove the antenna in its entirety.

Step 6

After that, take the middle antenna out of the housing. It is important to note that it is linked to the lower antenna.

Step 7

Now, beginning from the left side, unplug the speaker using tweezers.

Step 8

Then, with the help of a plastic spudger, carefully detach the battery connection from the motherboard.

Step 9

Carefully detach the front camera contact from the motherboard with a plastic spatula and place it aside. Also, remove the front-facing camera from its protective casing.

Step 10

Carefully detach the specified pins from the motherboard with a pudger or similar tool.

Step 11

Remove the motherboard from the computer. The USB port is located at the bottom of the motherboard (as shown by the arrow). Tilt the board gently 180 degrees so that you can reach the contact. Do not apply excessive force to the board. Remove the contact from the board by carefully prying it away using a plastic spudger. Remove the motherboard fully at this point. There is a little plastic pin in the aperture of the SIM card tray for further security. Make sure it doesn’t fall out while you’re working.

Step 12

It is now necessary to remove the old battery. At this point, extreme caution should be exercised. To prevent injuring the battery, use a flat, blunt object, such as the rounded end of a metal spatula, to pry it apart. The battery is permanently attached to the casing.

Remove the battery from the casing by gently prying it out with the tool. Disconnect the battery from one side first, and then from the other side. Then, using caution, insert the tool under the battery and carefully remove the glue from behind it. Removing the battery from its housing is necessary.

Installing the New Battery and Reassembling the Samsung Galaxy S7

Install the replacement battery into the Galaxy S7 cover, pushing the battery down firmly to ensure that the adhesive adheres more effectively.

  • In order to reconnect the USB port pin, turn the rear housing over and put it along the bottom edge of the case. Make the connection until you hear the sound of a “click.” Lower the board to allow it to be reinserted into the casing. Connect the motherboard’s pins to the ones that have been indicated
  • Insert the front camera into the recess in the top right corner of the case to complete the installation. Connect the camera to the motherboard using the included cables. When the connector is securely locked into position, you should hear a “click.” Connect the battery to the motherboard via the ribbon cable. The battery connector should be inserted into the motherboard until it snaps into place. Placing the speaker in the bottom of the enclosure is a good idea. Holding the speaker in position in the casing with your fingers until it snaps into place Reinstall the middle antenna in the casing and fasten it to the bottom antenna using a screwdriver. With your fingers, press the antenna into position until it snaps into place. Install the higher antenna next, starting on the left side of the vehicle. With your fingertips, press it against the housing until it snaps into place. Then you’ll need to put the yellow sticker back on and tighten the 12 screws.
You might be interested:  How To Factory Reset Samsung S8 Without Password

In order to restore the rear cover to its original position, follow these steps: Press down on the rear cover all the way around to ensure that the adhesive adheres properly. You may also use hot air to heat the Galaxy S7 before clamping or weighting it with a couple of books to help the adhesive adhere more effectively. By the way, safe mode on the Galaxy S7 is a specific environment for the Android operating system that does not allow any user-installed applications to be loaded.

How to Charge Galaxy S7 Properly

After all, it is understandable that the majority of us do not charge our new phones every day and that we do not always manage to complete a full cycle of usage. Moreover, only a small percentage of users generally empty their batteries completely to zero, not to mention the fact that it is sometimes necessary to remove the smartphone from the charger before it is fully charged. All of this helps to extend the battery’s life, allowing it to last for an additional year and a half or even two years without needing to be replaced.

Nobody should ever follow the 20-80 rule, and we never propose that they do.

In this instance, you are consciously denying yourself of around one-third of the battery life of your gadget, which is utterly inconvenient and ineffective.

How to Check the Battery Life on Galaxy S7

But. If, after all, your smartphone is no longer brand new and has begun to lose its ability to keep a charge, you should inspect the battery to determine the extent of its wear and tear. There are three different approaches that can be used to accomplish this. In order to check the battery status, go toSettings – Battery and choose it. Another issue is that, for some reason, most smartphone manufacturers do not include a method for determining the amount of battery life left in their devices’ software.

  1. The second method is to use a specific command to determine the battery’s capacity.
  2. You’ll be transported to a screen that contains information about your smartphone as soon as you touch the last asterisk.
  3. The third option is to use an app to verify the battery’s remaining capacity.
  4. Three of them come highly recommended by us: CPU-Z, Battery, and AccuBattery.
  5. Unlike AccuBattery, the other two rate it quickly, but not in percentages, but in relative units: outstanding condition, acceptable condition, service suggested, service necessary.
  6. They generally imply that wear and tear is still at a comparatively low degree of intensity.
  7. If the residual capacity is greater than 80%, it is advised that maintenance be performed.

And if the value is lower, it is strictly required, because with such figures, the smartphone not only has a shorter life span, but it is also more prone to sudden reboots. In this situation, take the gadget to the repair center and submit an order for the battery replacement service there.

How to Replace the Non-Removable Battery on the Samsung Galaxy S6 Active

Any smartphone’s battery life is significantly less than that of a lithium-ion battery. No matter what kind of device it is utilized in, we will eventually have to replace a worn-out power source with a new one at some point in the near future. The question is, what should we do if we have a smartphone that does not have a detachable battery? Built-in batteries in certain throwaway phones or inexpensive gadgets like as a heart rate monitor are a prevalent and comprehensible phenomena in today’s world.

  1. In spite of this, it is fairly common to hear people say that a smartphone becomes obsolete before its battery “dead.” But, first and foremost, morality is not the same as physicality.
  2. The second point to mention is that, despite the fast growth of electronics, no smartphone will become obsolete in less than two to three years.
  3. This is already a diagnosis in and of itself.
  4. In other words, the myth that a non-removable battery is created because the life of a smartphone expires at the same time as the life of the battery is pure bunkum is proven to be false.
  5. The first thing that springs to mind, and this is not without some logic, is that the makers purposely make the battery replacement process difficult so that the user must take the device to a specialist repair facility, where he or she will leave his or her money, and a lot of it.
  6. In any event, service centers are responsible for it.
  7. Direct hands and suitable information are the only things you’ll need to get started.
  8. We will require the following items in order to replace the battery:
  • Suction cup, thin double-sided tape, home hairdryer, tweezers, adhesive for repairing mobile devices (at the very least, “Moment” or similar)
  • The battery for replacement
  • A Phillips screwdriver with a tip of 1,5 mm
  • A plastic tamper tool (thin plastic screwdriver)

To disassemble the smartphone, turn it off and remove the SIM card, as well as the protective screen, if applicable. Heat the sides of the gadget with a hairdryer, catching a little portion of the front panel in the process.

  • Place the suction cup on the bottom of the screen and begin pushing very slowly and cautiously until a space forms between the body of the smartphone and the bottom of the front panel of the device. Make sure to pull extremely gently and carefully so as not to shatter the display. If this does not work, without removing the suction cup, try warming the seam around the perimeter of the smartphone once again
  • If this does not work, repeat the process. Insert a plastic screwdriver into the gap and carefully work your way around it, slowly unsticking the panel from the casing and removing it from the case. At this point, do not use the suction cup in order to avoid damaging the screen. If it is required, use the screwdriver to regularly reheat the seam in the area where you are working. After the panel has been entirely taken away, bend it upward. Remove the sticker that covers the loop connector on your computer. Hook the flat cable with a plastic screwdriver, pry it up, then pull it out from the connector using a plastic screwdriver. At this point, you may simply remove the front panel completely and leave it away. Loosen the 16 screws that hold the inner frame together using a Phillips screwdriver. Pulling the connecting plug will disconnect the battery from the rest of the system. To unlock the latches that hold the inner frame around the perimeter of the case, push the edges of the case with your fingertips to open them. It is now possible to remove the frame that contains the battery. Turn the frame over and try to remove the battery using the same plastic screwdriver you used to install it. If the adhesive does not budge, we will heat the rear of the frame with a hairdryer in order to weaken the glue. It is necessary to put thin double-sided tape around the perimeter of the frame in those locations where the glue has previously been placed (we peel off the adhesive), insert the new battery, reassemble the smartphone, and reglue the front panel back into place at the same time.

Consequently, we discovered that the smartphone with a built-in battery is not a disposable device, and that the battery in it can be replaced without the assistance of specialist workshops, allowing us to save both time and a significant amount of cash.

Leave a Reply

Your email address will not be published. Required fields are marked *