How To Turn On Samsung Phone

Contents

What to do when your Samsung phone does not turn on

1. Make sure the power button is working. 2. Check to see if your phone has a reasonable amount of battery life. Connection of the original charger to your phone. If your phone does not switch on after a few minutes, repeat the process. 3. Check to see that the charging port on your phone is not damaged. 1. Inspect your phone thoroughly to ensure that it is not overheated, bloated, or otherwise damaged. 2. b. Carefully check your phone’s charging port and clean out any dirt or debris that may have accumulated.

For assistance, please visit the Samsung Service Center in your area.

Confirm that you are using a charger that is compatible with your device.

5.

  • Please keep in mind that if a forced restart is completed successfully, no information from the phone will be erased.
  • If the phone begins to turn on, press and hold the Powerkey until it stops.
  • 6.
  • Please keep in mind that a physical factory reset will completely wipe out all of the information on your phone!
  • However, if you continue to have problems, please visit your local Samsung Service Center for help and repair.

How to Turn on a Samsung Phone (6 Steps)

Getty Images/Getty Images News/Getty Images/Justin Sullivan There are a few things you need to complete before you can use your Samsung phone for the first time, and they are listed below. If your phone works on the GSM network, it will require a Subscriber Identity Module, often known as a SIM card, in order to function properly. The phone will continue to function even if the card is not present, but you will be unable to make or receive calls. You’ll also need to install a battery and completely charge it before you can use the phone for the first time.

Step 1

On remove the back cover of the Samsung phone, apply pressure to it and slide it down to release it. Some versions need you to run your fingernail down the edge of the rear plate in order to remove it.

Step 2

Insert the SIM card into the SIM slot by sliding it in. During insertion, the metallic contacts on the card should be pointing downward. Alternatively, if a battery has already been fitted, just pull it up and away from the phone to remove it completely. If your Samsung phone does not require the use of a SIM card, you can go to the next step.

Step 3

The battery should be inserted into the battery compartment.

Check to ensure that the metallic contacts on the battery are aligned with the prongs in the container.

Step 4

Replace the battery cover with a new one.

Step 5

Charge your Samsung phone by plugging it into a power socket and inserting its little USB charging cable into the charging port on its back. Allowing the phone to charge for several hours before using it for the first time is strongly recommended. When the charging process is finished, remove the charging wire.

Step 6

To turn on the Samsung phone, press and hold the “Power,” “End,” or “Lock” button for a few seconds. This button can be found either at the top of the keypad or on the side of the phone, depending on the model.

Samsung Galaxy Won’t Turn On? Here’s the Fix!

Have you ever gone to use your phone only to be met with a blank screen glaring back at you? Despite pressing the power button, no homepage appears to have been shown. In the event that your Samsung phone would not switch on, it can be a frustrating scenario, and you may be wondering how this could have occurred to begin with. We can appreciate the difficulties that this circumstance might provide. Consequently, we’ve included some useful tips and tactics below to assist you in resolving this issue.

If you’ve gone through our tutorial and your Samsung phone still isn’t working, it may be time to visit our shop and speak with one of our technicians.

Why won’t my Samsung Galaxy turn on?

Having a phone that won’t power on and isn’t showing any indications of life may be a very frustrating experience. Perhaps all that is required is a simple reset of your Samsung gadget. Alternatively, it may be necessary to restore it. However, before you worry and run to the store to get this repaired, try out all of our suggestions listed below before you panic.

  • Is it been a long since you last turned on your Samsung with a fully charged battery inside? It’s possible that this is the root cause of your phone’s inability to start. It is possible that your phone only need charging, but if this does not work, the battery will need to be replaced. Crash of a software application: It is possible that your device may require a soft/hard reset, a restoration, and a software update. Is it possible that your phone has come into touch with water? If you have tried all of our software recommendations and are still having trouble resetting your phone, it is possible that the hardware of your phone is at problem, and it may be necessary to pay us a visit.

How to Fix Samsung Galaxy That Won’t Turn On?

The battery on your phone may have run out of energy, which might be the source of your phone’s inability to turn on. Try connecting a charging wire to your smartphone and then connecting that connection to a power outlet, allowing the phone to rest for around 15 minutes. If everything has been completed successfully, you should see the Samsung logo. If this is the case, continue reading our advice!

Reboot your Samsung Galaxy in Safe Mode

Some typical reasons why your Samsung won’t turn on include the fact that some apps placed on your smartphone may not be compatible with the software running on your device. Using applications and programs that have been downloaded from uncertified sources might cause your device to sluggish and perhaps crash. If you typically use your phone in Safe Mode and the overall performance is satisfactory, it is possible that a third-party software is to blame for the problem. To activate the Safe Mode function, perform the following actions: Hold down the power button and wait for the Samsung logo to display on the screen before proceeding.

Once the Samsung logo shows, press and hold the power button while simultaneously pressing and holding the volume button. When the device is turned on, the home screen will be displayed in its entirety, with the Safe Mode option appearing at the bottom of the screen.

Soft Reset your Samsung Galaxy

In the odd occasion that your phone becomes unresponsive, a simple solution would be to conduct a soft reset on your device to resolve the problem. This may be accomplished by pressing and holding both the volume and power buttons for roughly 10 seconds. This will cause your device to reset.

Hard Reset your Samsung Galaxy

To do a hard reset on your device, press and hold both the volume up and power buttons at the same time for 10 seconds more. This will detach the battery and perform a system restore, which should bring your phone back up to full functionality.

Reboot your Samsung Galaxy in Recovery Mode

In order to restart your device in recovery mode, perform the procedures listed below:

  1. Turn off your electronic gadget. Press and hold both the Volume Up key and the Bixby key at the same time. Continue to hold down the Power key
  2. When the Samsung logo displays, press and hold all of the keys simultaneously. Installing a system update will be displayed on your screen prior to the appearance of the system recovery menu with alternatives. While holding down the volume down key, you may clear the cache partition. To choose, press the power key on your keyboard. Hold down the volume down key to choose yes, and then hit the power key to confirm. As soon as the wipe partition process is complete, hit the power button to restart the device.

If the above doesn’t work

It is possible that your Samsung Galaxy phone has a hardware fault that will need to be evaluated by one of our specialist technicians in store if you have tried all of the suggestions above and your smartphone still won’t switch on! However, it is beneficial to check with Samsung to see whether you are still covered under warranty before coming to see us. Perhaps they will be able to assist you with this problem! If you still have a Samsung warranty, repairs may be covered by the company; however, if your warranty has expired, you will be responsible for the cost of the repairs.

We would recommend performing a diagnostic on your phone to rule out the possibility that the problem is with the hardware.

A regular price of £20 is charged for this service, and the procedure can take up to 48 hours to complete.

You might be interested:  How To Factory Reset Android Phone When Locked Samsung

Here is a list of the Samsung phone repairs that we provide.

How to Fix Power Button Not Working On Samsung

Is the Power button on your Samsung device not functioning properly, and you are always looking for solutions? If you answered yes, we’ve got your back. This tutorial will bring you through the most effective methods for what to do when the Power button on your Samsung does not function. The power button on an Android phone is often located in the top-right corner of the phone’s screen. To wake up your phone and illuminate the lock screen, simply click the Power button on the side of your phone’s keyboard.

Other options include turning on your phone, entering emergency mode, and taking a screenshot using the Power button.

You will merely try pressing it harder, but the result will be the same as before!

The techniques shown in this tutorial are tried and true and will assist you in resolving the problem of the Power button not working. As a result, you may turn on or restart your phone without having to press the Power button. Let’s get this party started!

How to Turn On Phone when Power Button not Working?

The Power button, on the other hand, is something that all mobile phone users greatly rely on when using their phone. It’s understandable that you’re concerned about what to do if your Samsung device’s power button isn’t functioning properly. To begin, you may need to understand how to switch on your phone without pressing the power button:

Turn on Phone with Fingerprint Scanner

On the most recent Samsung devices, the fingerprint scanner is always enabled and ready to go in order to make user activities more convenient. Consequently, if the Power button on your Samsung device is not functioning properly, you may activate the fingerprint feature in the Settings to switch the device ON and OFF when the Power button is not functioning properly. After that, you may easily replace the main purpose of the Power button with something else. Consider using a fingerprint scanner.

Scheduled Powering ON or OFF

You may also use Scheduled Powering ON or OFF to turn your Samsung device on and off without having to press the Power button, which may prove to be the most convenient choice for you. When activated, this function will switch on and off your Samsung Smartphone at a pre-determined period, allowing your device to take a little break. Simply follow the steps outlined below to make this feature operational: Step 1: Go to your device’s Settings menu and select General. Step 2: Select Scheduled Power ON/OFF from the Settings menu and simply toggle the options for Power ON and Power OFF on and off.

Powering on or off at predetermined intervals

Remap the Power button to another Physical Switch

A small number of programs – such as Button Mapperon the Google Play Store – allow users to remap the functionality of the device’s Power button to the Volume button by simply pressing the button twice. In addition to this, a variety of different applications may simply be used to integrate gesture-based functionality into your Samsung smartphone. By programming, you may also remap the button to another physical button on your device. Don’t be concerned; it is not that difficult, since only a few command lines are required to complete the task.

The next step is to learn how to repair a non-responsive power button on your Samsung smartphone.

How to Restart Phone without Power Button

You can use the techniques listed above to power on and off your phone without using the Power button, or to take a screenshot, or to repair buttons that are not responding properly. Here are some suggestions to assist you in restarting Samsung without the use of the Power button, as seen below. Depending on whether your Samsung phone is completely turned off or whether it is only partially turned on and in sleep mode, the procedure will change.

Reboot Samsung with Developer Options

You may utilize the Developer options in Settings to reboot the phone, enter recovery mode, or enter fastboot mode on devices that are running Android Lollipop or higher versions of the operating system.

To restart the phone from the settings menu, do the following:

  1. From the Settings menu, select About phone
  2. Then tap on the Build number seven times to access Developer settings. Alternatively, choose Software details followed by Build number. For the Developer settings menu to be accessible, enter your pattern, PIN, or password. Returning to Settings, you can enable an Advanced reboot under the Developer settings
  3. Otherwise, go back to Step 1. Please keep in mind that it may vary depending on the model.

Advanced Rebooting Techniques How to Resolve the Problem of Android Recovery Mode Not Working

Restart Phone when it is ON but in Sleep Mode

When your Samsung smartphone is turned on but in Sleep mode, it becomes quite simple to restart the device without having to press the Power button. Multiple devices can be woken up by plugging them into a charger, or by receiving a phone call from someone. You can ask a friend to call your phone, or you can ring your phone from another phone to do this. If a phone has a physical Home button, pushing it will often bring it to life and allow it to be used. If your Samsung handset has a physical Camera button, pressing that button will also activate the gadget.

How to Fix an Unresponsive Power Button?

Despite the fact that you can switch on and off your phone without using the power button in some cases, you may still wish to solve the unresponsive power button on your phone. You will be guided through some of the most popular and effective quick methods for repairing the power button of a mobile phone at home or seeking expert assistance:

Solution 1: Check the Power Button

First and foremost, look to see whether there is any damage to the power button. On rare occasions, your phone may have fallen to the ground and the Power button may have been damaged or jammed. Consequently, if the Power button is broken, you may get it replaced, and if the Power button is stuck, you can try shaking your device to see if the button can be freed once again. However, avoid striking your phone against a hard surface in order to unstick the Power button, as this may expose your Samsung Smartphone to more risk and harm.

Solution 2: Connect Your Device to a Charger or USB

Connecting your smartphone to a USB or charge will cause your phone to wake up, then you can just go ahead tounlock the screento access your device. Another option for waking up your phone is to request that someone call your phone; this will cause the phone to wake up, and you will be able to quickly gain access to your device. Your Device Must Be Connected to a USB Port

Solution 3: Visit a Phone Repair Service Center

Last but not least, if the Power button on your Samsung cellphone is damaged or unresponsive and none of the alternatives listed above were successful in repairing it, you may take your device to a professional mobile repair shop or service facility to get it repaired. You may also take your phone to the official after-sales service facility, which will be able to provide you with the greatest assistance in repairing your gadget. All of the alternatives listed above will undoubtedly assist you in resolving the problem with your Samsung device’s unresponsive Power button.

Now, in the next part, we’ll have a look at how you may restart your smartphone without having to press the Power button.

How to Repair Samsung to Switch on Phone

In addition to the techniques listed above for turning on or restarting your phone without the use of the Power button, you may also use an app to turn on your phone. Using DroidKit, a comprehensive Android solution, you can reset your phone if the Power button is no longer functional. If you are unable to power on your phone due to system malfunctions, DroidKit will fix and restart it for you. Because it is capable of resolving all system difficulties on a Samsung device, such as Samsung not responding, Samsung blank screen, Samsung being stuck in recovery mode, and so on.

Furthermore, DroidKit allows you to gain access to a locked Android phone if you have forgotten your password, pin, pattern, fingerprint, or other security measure. Check out the following examples of how DroidKit may assist you:

DroidKit – Repair Samsung at Home

  • When the phone’s button is not working, you must force it to restart. Fix a Samsung phone that is turned on but has a black screen, a frozen Samsung, and so on. Fix using an official Samsung ROM, which requires no rooting and is 100 percent cleansafe
  • The software is compatible with all Samsung smartphones and tablets.

For those unfamiliar with DroidKit, here’s how to switch on your phone: Step 1: Download and install DroidKit on your PC. Start it up and selectFix System Issues from the drop-down menu. Fix System Issues by selecting it from the drop-down menu. Step 2: Double-check that Samsung is connected. Continue once you have read the notes. To proceed with the repair, press the Start button. Step 3: When the PDA and the computer match automatically. To obtain the firmware package, click on the Download Now button.

Follow the on-screen instructions to set the computer into Download Mode after clicking the Fix Now button.

DroidKit will then fix your phone.

The system has been successfully repaired.

  • How Do I Flash and Reinstall the Android Operating System
  • How to Resolve the Android Boot Loop Problem
  • How to Use Android’s Reboot to Bootloader Feature

The Bottom Line

Now there is no longer a problem with the unresponsive Power button. By obtaining one of the methods listed above, you will be able to successfully resolve the Power button not functioning issue on your Samsung device. Additionally, it gives you with other options for turning on your phone without using the power button. The option to have your Samsung smartphone repaired and the Power button repaired from an authorized service facility is always available in the event that none of the other methods are successful.

My Samsung Galaxy Won’t Turn On! Here’s The Real Fix.

You’re having trouble getting your Samsung Galaxy to switch on, and you’re stumped as to why. This is a really irritating situation, especially when you consider how much money you spent on your smartphone. If your Samsung Galaxy does not switch on, I’ll teach you what to do in this post.

Make Sure Your Samsung Galaxy Is Charged

Sometimes all it takes is a quick charge of your phone’s battery to solve the problem. Charge your Samsung Galaxy for 5–10 minutes to see whether it works. Finally, press and hold the power button for several seconds to see if your Samsung Galaxy comes on or displays a charging icon. If it does, your battery is charging. If your battery is fully depleted, charging will take significantly longer. In certain situations, your Samsung Galaxy won’t switch on right away, and you may have to wait several minutes before it even indicates that it is charging.

Force Restart Your Samsung Galaxy

It’s possible that a software crash has caused your Samsung Galaxy to not switch on. You may, however, force your phone to restart if necessary. An unintentional force restart will cause your phone to shut down and then come back on again. The data on your phone will not be affected by this sort of restart. Hold down the Volume down button and the Power button on your Samsung Galaxy for 10–20 seconds at the same time to force the device to restart automatically. Upon successful completion of the restart, the Samsung logo will show on the screen.

You might be interested:  How Do I Get My Samsung Tv Picture To Fit The Screen

Try Using A Different Charger and Charging Cable

Try charging your Galaxy with an alternative cord and charger to see if it helps. It’s conceivable that the problem is with the cord or the charger rather than with the phone.

When I believed my phone was broken, I went out and got a new one, only to discover later that it was the charger that was the problem. Don’t make the same mistake I did. A fresh charger is far less expensive than a new phone!

Reboot Your Galaxy In Recovery Mode

Attempt to restart your phone in recovery mode once you have completed the procedures outlined above. This mode bypasses the operating system and allows you to do a factory reset without having to restart your computer. Recovery mode should only be used as a last resort. Be careful to save a backup of your Galaxy device first by visiting to Settings – Accounts and backups – Backup and restore before putting your device into recovery mode. By creating a backup, you ensure that you will not lose any of your information if you need to reset your Samsung Galaxy.

It is possible to use the Samsung Galaxy without a Home button by pressing and holding the volume up button and the Bixby button simultaneously for a few seconds before pressing and holding the power button.

Having entered recovery mode, you may now perform a factory reset on your phone.

To begin the reset process, press the power button.

Repair Options

The next step is to investigate your repair alternatives if you’ve completed all of the troubleshooting methods listed above and your Samsung Galaxy is still not booting. In order to get your phone fixed, locate an authorizedSamsung service center in your area. Samsung has formed a partnership with uBreakiFix to provide hardware repair services. Check out thecell phone comparison toolto compare offers and pick the finest smartphone for your needs if you’ve decided it’s time to upgrade your phone.

Your Phone is Working Again!

Your phone has been restored to operational status! You’ll be prepared the next time your Samsung Galaxy won’t power on since you’ll know what to do. If you have any further queries, please leave them in the comments section below.

How to power-off or restart the Samsung Galaxy S20 or S21

(Pocket-lint) – a piece of lint found in a pocket. For anyone considering purchasing the Galaxy S20 or Galaxy S21, there has been a little but substantial change to the software, and you may find yourself unable to turn it off because of the update. This is due to the fact that it no longer allows a press and hold of the “power” button to activate the power or standby buttons by default – but the side button may still be programmed if you so choose. First and foremost, here’s how to turn off or restart your Samsung Galaxy S20 or S21 model computer:

  1. Swipe down the quick settings window and you’ll find a power icon at the bottom of the screen. Selecting that symbol will bring up the options to power down or restart your computer.

As you can see, it’s straightforward if you know where to look. However, that is just an option for software. There is also the option to turn off the hardware. Simply press and hold the side button and the volume down button together until you see the same power choices menu as before. If your phone has crashed or become unresponsive, the same hardware solution will work: press and hold the side button and the volume down button for 10 seconds until the phone responds. You should get a slight buzzing sensation, and your phone will reset.

Alternatively, if you don’t want to do that, or if you want to restore the power options that you had on prior Samsung devices, doing so is straightforward:

  1. To get to the power screen, follow the procedures outlined above. Scroll down to the bottom of the page and choose “Side key settings.” Choose what you want the button to accomplish for you.

Pressing and holding (the old-fashioned technique of shutting off your phone) as well as a double press are all available alternatives. Our preferred method of launching the camera is with a double press, however you may modify this to start any other app you choose. These three covers will keep your iPhone 13 looking great while keeping it sleek and safe. Pocket-lint International Promotion was created by Pocket-lint International Promotion. Pitaka’s cases are available in a variety of colors, patterns, and levels of protection.

Chris Hall is the author of this piece.

Samsung Galaxy Not Turning On [PROBLEM SOLVED]

It goes without saying that if you possess a Samsung Galaxy, you are aware that it is a high-end smartphone. The vast majority of individuals who purchase it believe it to be well worth their investment. Galaxies are seldom prone to significant difficulties as long as they are well-maintained, but any electronic item is susceptible to minor malfunctions every now and again. Say, for example, that your Galaxy does not turn on when you press the power button. If this is the case, you’ll need to come up with a solution soon, or else you’ll be unable to make or receive calls, send texts, or do anything else on your phone.

Why Might Your Samsung Galaxy Not Be Turning On?

In the event that your Samsung Galaxy does not switch on, there might be a number of potential reasons for this to occur. It is possible that a software problem will necessitate a simple reset. Depending on the situation, the phone may require charging or the battery may have totally depleted itself. It’s possible that the phone came into touch with water or was damaged in some other manner while in transit. The possibility exists that any of these factors are contributing to the black screen glaring at you.

Start by Charging Your Samsung Galaxy

The most straightforward solution is the first one you should try, and that would be to charge your phone. If you haven’t used your Galaxy in a while, it’s probably time. If this is the case, it is possible that the battery has completely depleted itself. It would be better to plug it into a wall socket in this case, but you could also connect the gadget to a laptop or desktop computer using a USB connection as well. After connecting in your Galaxy, you should be able to see the Samsung logo appear on the screen after around 15 minutes.

If the logo does not appear, proceed to the next step in the process.

Next, Try Rebooting the Galaxy in Safe Mode

The software that you are running on your Galaxy may not always be compatible with the applications that you may have installed on it. Downloading programs and apps onto your phone that have a negative reputation might occasionally result in troubles similar to the one you are currently experiencing. Both slowness and even crashing of the phone are conceivable outcomes. What percentage of the time do you use your phone in Safe Mode? This might be an indicator that a third-party software is to fault, especially if the overall performance does not suffer as a result of the problem.

Allowing the Powerbutton to be released while simultaneously holding down the Volumebutton on the top left-hand side of the screen. The gadget should now be operational. After that, you’ll see the Homescreen, with Safe Mode at the bottom of the screen.

The Soft Reset of the Galaxy Might Get It Working Again

It is simple to do a soft reset on the Galaxy, and it is possible that this will restore functionality. You must push and hold the Power and Volume buttons down at the same time for about ten seconds. Hopefully, this will cause the gadget to reboot.

Next, Try a Hard Reset

If the soft reset didn’t work, the next step would be to attempt a hard reset. A hard reset is a restart of the phone that is performed without the user’s consent. It is more shocking, but it may be the only way to get the gadget to respond if everything else has failed. To do a hard reset, you’ll need to press and hold the Power and Sidebuttons simultaneously for 10 seconds. Release them, and then immediately keep them down for an additional 10 seconds until they are exhausted. This should cause the battery to be disconnected for a brief period of time, allowing you to do a forced restoration.

You Can Also Try Rebooting the Galaxy in Recovery Mode

If you’re still having trouble getting the Galaxy to power on, the next step would be to reboot the device while it’s in recovery mode.

  1. You should turn off your phone. Naturally, if you can’t get it to switch on in the first place, this step is superfluous. Press and hold down yourVolume Upkey and theBixbykey for a few seconds, then press and hold down thePowerkey until you see the Samsung logo appear. When it does, release all of the keys at the same time. A system update will be installed, and you will be notified of this. Following that, the system recovery menu will display, which will have a number of various alternatives
  2. To clear the cache partition, press and hold down yourVolume Downkey for several seconds. To activate the Powerkey, press it. To choose Yes, press and hold down yourVolume Downkey for a few seconds, then hit thePowerkey again. The wipe partition procedure should be carried out. Press your Powerkey one more time to restart the phone after it’s finished

What if Nothing Has Worked for the Galaxy Up to this Point?

Disconnect yourself from your phone. a) Naturally, if you can’t get it to switch on in the first place, this isn’t essential. Hold down yourVolume Upkey and yourBixbykey for a few seconds, then press and hold down yourPowerkey until you see the Samsung logo. Remove all of the keys from the ignition when it does. Installing the system update will be visible. Afterwards, a system recovery menu with many alternatives will display; click on one of them to proceed. In order to clear the cache partition, press and hold down yourVolume Downkey.

The erase partition procedure should be carried out automatically.

How to turn on phone without power button Samsung

There are occasions when critical hardware components fail for no apparent reason. A large number of customers have filed complaints regarding the non-responsive Power button. When the power button is faulty or unresponsive, it is possible that it will not function. With this post, we will teach you a quick and easy way to switch on your Samsung phone without using the power button. The power button on a Samsung phone is located on the upper right side of the device. As soon as you press it for a second, the screen lights will illuminate.

In addition, this button may be used to totally shut down the device – simply press and hold the power button for a few seconds and you will be presented with the Power Off option.

We place a great deal of reliance on the power button. It is really difficult to utilize our phones if we do not have it. There are a number of concerns that users may have when using their phones’ power buttons, which are listed below:

  • Battery depletion
  • Physical or liquid damage to the phone
  • And other problems. Problems arising as a result of a damaged power button System failure as a result of an operating system and malicious program clash makes the system restart option appealing. It has been noted that some applications and firmware might cause the restart option to misbehave. This issue is often caused by firmware and software upgrades that have been loaded on the phone. However, this is not always the case.
You might be interested:  How To Turn Off Narrator On Samsung Tv

Don’t be concerned; simply read the article. You will have a plethora of resources to walk you through the process of turning on your Samsung phone without the power button. You may reset your phone on a regular basis if you have the same problem as the person who had their power button damaged. To do so, follow the easy procedures outlined below. When you notice that the power button is no longer working, there are two scenarios that might occur: In the latter scenario, you are still able to utilize the programs on your smartphone; however, the power button is not functional.

Let’s start with the first scenario and see what we can learn about how to switch on a Samsung phone without using the power button while the screen is turned off.

Method 1: Plug in your Android Phone to a Charger

It is conceivable that your Samsung phone was turned off due to a low battery charge, which is a possibility. So, simply connect your charger and you will notice that your phone will automatically turn on. When the battery is entirely depleted, you must, however, pause for a minute before continuing. Following that, you will get an on-screen indication indicating the battery status. This means that there is nothing wrong with your phone in this situation. It simply means that the power button was not functioning since the phone’s battery was not sufficiently charged.

Method 2: Restart from the boot menu

While this option is typically used to execute a factory reset or a cache clean, it may also be used to accomplish a variety of other operations. So, even if your phone does not restart when you press the power button, you may perform the following steps:

  • First, navigate to the phone’s recovery menu, which can be accessed by holding down the home, power, and volume up buttons for a lengthy period of time simultaneously. For example, you may need to employ the combination of Home + Volume up + Volume down, Home + power button, Home+ Power + Volume down, or Home+ Power + Volume down in specific situations. As soon as you access the recovery menu, pick the option to Reboot the machine right away. The volume up and down buttons will be used to scroll between the selections, and the home button will be used to make a pick.

Method 3: Restart Android with ADB

If the situation persists, you can seek assistance from ADB, which stands for Android Debug Bridge. Here is what you need to do in order to switch on your phone without using the power button; however, make sure that the USB debugging capability is enabled first:

  1. Android Studio and SDK tools may be obtained from the official website, and they should be installed. After the installation has been completed successfully, open the command prompt and go to the appropriate location of the ADB directory
  2. Then, using a USB cord, connect your phone to your system and switch it on using the ABD instructions that correspond to it:
  • The first step is to enter the command “adb devices” into the command prompt. This will display the ID and name of your gadget. Just make a mental note of it. Afterwards, issue the command “adb –sdevice IDreboot.” This will cause the device to restart.

To begin, type the command “adb devices” into the command prompt of your operating system. Your device’s ID and name will be displayed in this window. Keep it on hand for future reference if necessary. To complete the process, enter the command “adb –sdevice IDreboot.” In this case, the device will be restarted.

What to do for long term process?

On some of the most recent Samsung smartphones, it appears like the fingerprint scanner is constantly activated. This function may be configured to be turned off or on by going to the settings menu.

Scheduled power on or off

Another method is to simply set power on and off times so that the phone will have pre-configured periods of time to rest. To accomplish this, navigate to the Scheduled power ON/OFF settings and select the choices “Power on” and “Power off.”

Remove the power button to other physical one

As previously stated, there is a feature available called Power Button to Volume Button, which allows you to convert the duty that the Power button does on your smartphone to the Volume Button simply pressing the Power button. With programming, on the other hand, you may achieve the same results. The problem of being stuck in a cycle will be resolved as a result of this choice.

It is not a difficult operation; all it takes is three simple command lines to allow another hardware component to perform the function of the Power button on your Samsung. The following are the procedures to take in order to replace the power button with the Volume button:

  • Activate recovery mode on your phone and then run the following command to get the key layout settings:

Adb pull /system/usr/keylayout/Generic.kl /system/usr/keylayout/Generic.kl

  • Search for the option “VOLUME DOWN” or “VOLUME UP” in the Generic.kl and replace it with the Power button
  • Then, use the following command to restore the key layout settings:

Adb push Generic.kl /system/usr/keylayout/Generic.kl /system/usr/keylayout/Generic.kl

Tips to protect the power button on Samsung
  • Don’t allow the phone to become increasingly reliant on the restart button. Ensure that the Restart key is protected from moisture and dust. Restarting the phone with an alternative, such as launchers or home-screen widgets, is recommended. Install a battery management app that will keep your phone from overheating.
Conclusion

We have completed our discussion on how to switch on a Samsung phone without pressing the power button. As you can see, when the screen is turned off, you should check to determine if the problem is caused by battery drain. After that, we spoke about how changing the recovery mode option and running specific commands on the ADB section can assist to address the problem. After that, we moved on to the opposite scenario and addressed what you should do if you are able to use your phone but are having problems with the Power button.

We will now conclude our debate, but we will leave our comment area available in case there are any concerns, complaints, or suggestions.

How to Turn Off a Samsung S20

  • We’ve completed our discussion on how to switch on a Samsung phone without pressing the power button. So, when the screen is turned off, you should check to determine if the problem is caused by battery drain before proceeding. Then we spoke about how modifying the recovery mode option and running specific commands on the ADB section might assist to remedy the problem if you have one. Afterwards, we moved on to the opposite scenario and spoke about what to do if you can use your phone but are having difficulties using the Power button. In the next section, we discuss methods for protecting your Samsung power button in the long term, and we conclude with some preventive steps. We now bring our debate to a close, but we invite you to post any difficulties, complaints, or suggestions in the comment box below this paragraph.

Learn how to switch off the Samsung Galaxy S20 and subsequent phones, including the Galaxy S21, in this post.

Where Is the Off Button on the Samsung S20?

A separate power button was included on earlier versions, such as the Galaxy Note 9, however this is no longer the case. This decision, which has been carried through to the Galaxy S21, was made because Samsung did not want to incorporate a distinct power button on the Galaxy S10. On the S20, there is no separate power button, which is a significant drawback. After that, you may choose between two options for shutting down the S20. A shortcut is a method of shutting down and restarting a phone that includes hitting a combination of physical buttons or utilizing the software interface.

How Do I Turn Off My Samsung Galaxy S20 Using the Hardware Buttons?

The following is an example of how to switch off the S20 using the hardware buttons:

  1. Press and hold both the side button (the Bixby dedicated button) and the volume down button at the same time
  2. This will activate Bixby. Wait for the Power menu to show on the screen. To switch off your device, use the Power Off button. To power cycle or reboot, use the Restart button.

Note

If your phone freezes or becomes unresponsive, you may force a reboot by pressing the same button combination. Simply press and hold the side button as well as the volume down button for ten seconds.

How Do I Turn Off My Samsung Phone Without the Power Button?

You may also shut down and reset your S20 by using the software or the Samsung UI (user interface). Here’s how it’s done:

  1. To access the quick settings panel, swipe down from the top of the screen. After that, swipe down one more to see the full-screen panel. Tap the power symbol, which is situated in the upper right corner next to the settings or gear icon
  2. To switch off your device, use the Power Off button. To power cycle or reboot, use the Restart button.

How Do You Turn On a Samsung S20?

Even though the Galaxy S20 lacks a dedicated power button, you can still turn it on by pressing and holding the side button (also known as the Bixby button) for a few seconds. By pushing the button once more, you may also bring the screen back up to date.

How to Change the Side Button Function on a Samsung S20

By default, when you press and hold the side button on a Galaxy S20, Bixby, Samsung’s voice assistant, will be activated by default. Even if you do not intend to utilize Bixby, you may customize the purpose of the button in the Samsung settings menu. When you press and hold the side button, for example, it is possible to modify its purpose so that it brings up the Power menu instead of the main menu. This is how you may go about it:

  1. To access the quick settings panel, swipe down from the top of the screen. After that, swipe down one more to see the full-screen panel. Toggle the power symbol in the upper right corner (located next to the settings or gear icon). It will bring up the Power menu, which will be useful. Side Key Settings may be found at the bottom of the screen. Press and hold the Power Off Menu option in the Press and Hold area.

When you press and hold the side button on your S20, it will now access the power menu rather than Bixby, allowing you to switch off the phone or reset it. FAQ

  • If you don’t have a password for your Samsung S20, how can you turn it off? When shutting off your Samsung smartphone from the lock screen, you may have been prompted to enter your password in some previous versions. It is not necessary to enter a password in order to switch off the Samsung S20 from any screen. What is the procedure for turning off 5G on my Samsung S20? You may switch off 5G by going into the device settings on your phone. Navigate toSettingsConnectionsMobile NetworksNetwork Modeand choose an option that does not include 5G. The most popular option is LTE/3G/2G (auto connect)
  • However, other options are available.

Thank you for informing us about this!

Leave a Reply

Your email address will not be published. Required fields are marked *