How To Change The Water Filter On A Samsung Refrigerator


Replace the water filter in your Samsung refrigerator

There are three different types of Samsung water filters, so you’ll want to be sure you’re getting the right one for your refrigerator before purchasing one. Replacement filters are available for purchase on ouraccessories page if needed. To begin, identify the filter in your refrigerator’s model. You should refer to your user handbook if you are unclear about the location. Then, on the filter itself, look for the model number printed on it. This will inform you of which of the following filter types you will require for your application.

If you’re not sure whether or not you need to replace the filter, look for an indication light on your refrigerator.

If you are about to replace the filter, the light will become purple to indicate that it is time.

You should alter the filter as soon as possible at this point.

  1. After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance. Once you have unlocked the old water filter, remove its lid and swivel it counterclockwise to reinstall it. Afterwards, just pull it straight out of the filter housing to remove it. Prior to placing the new filter in the system, remove the protective cover from the top of the existing filter. Afterwards, insert it directly into the filter housing and turn it counter-clockwise
  2. Examine to ensure that the lock symbol corresponds to the indication line.

Types of HAFCU1 filters include:

  1. After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance. Using a left-handed twist, you can remove the old filter. This will allow you to access it
  2. Afterwards, pull it downward to remove it from the filter housing. The replacement filter should be inserted by pushing it up into the filter housing and then turning it to the right. Check to ensure that the notch at the top of the filter corresponds to the arrow on the filter’s housing. Replace your filter and then flush it thoroughly with a few liters of water to wash out any contaminants or air that may have gotten into it. Then, make sure that the water filter light on your refrigerator is turned back on. Please refer to the following sections for further information.

After turning off the water, locate the filter and clean it as necessary. You should reference your user manual if you are unclear of where it is located. Using a left-hand twist, you may remove the old filter. Upon doing so, it will be unlocked. Afterwards, pull it down to release it from the filter housing. Using your fingers, press the new filter upwards and then to the right; this will ensure that it is properly installed. To avoid clogging the filter, make sure it has a notch at the top that matches the arrow on the housing.

Then, make sure that the water filter light on your refrigerator is turned off and back on again.

  1. If theFilter Resetbutton is accessible on the control panel, locate it and press it. In some cases, it is a secondary function of another button on the panel
  2. Once identified, press and hold the proper button for 3 seconds until the light turns out
  3. The filter symbol will either turn off or return to its usual color when the light is turned off. This restarts the timer for the next six months.

Please keep in mind that some models may require you to press two buttons at the same time in order to reset the light. Touch screen models will instead make use of on-screen menus. Consult your refrigerator’s owner’s handbook for detailed operating instructions. The water filter light and timer on your Family Hub refrigerator may be reset by following the instructions outlined below.

  1. Start by selecting Apps from the Home screen, followed by Fridge Manager
  2. Then choose Water Filter from the Home screen, followed by Reset and then Proceed. The filter light and timer will be reset as a result of this. If you require a Samsung water filter, you may purchase one by pressing the Buy Filter button after tapping the water filter symbol.

On models RF4289 and RSG309, you may also reset the filter light by pressing the reset button.

  1. Then, at the bottom of the screen, navigate to and pick theSettingsicon, and then tapWater Filter to begin. As soon as the Water Filter menu appears, press Next three times in the lower right corner of the screen until you reach page 4/4 of the Water Filter menu. Hold the object with your fingertips. Remove and reinstall the water filter until it changes its status, which may be done in the middle of the display. After the message “Filter Replaced” appears and disappears from the screen, tapSave in the lower right corner of the screen.

In order to define what is filtered by a water filter, the National Sanitation Foundation (NSF) and the American National Standards Institute (ANSI) have developed a variety of standards. Samsung’s water filters are Carbon Filters that meet the requirements of the NSF/ANSI 42, NSF/ANSI 53, and NSF/ANSI 401 standards, among other requirements. NSF/ANSI 42 is a standard for food safety and sanitation.

  • Filtered to decrease the presence of aesthetically objectionable contaminants like as chlorine and taste/odor

NSF/ANSI 53 is a standard that specifies how a product should be designed, manufactured, and tested.

  • Certified to decrease a pollutant that has a negative impact on health. The following substances have been identified as having negative health effects by the United States Environmental Protection Agency (EPA) and Health Canada: Asbestos, Atrazine, Benzene, 2, 4-D, Carbofuran, Chlorbenzene, Cyst (99.99 percent), Endrin, Ethylbenzene, Lead, Lindane, Mercury, O-Dichlorobenzene, P-Dichlorobenzene, Tetrachloroethylene, Toxaphene

NSF/ANSI 401 is a standard for food safety and sanitation.

  • It has been proven to lower one or more of the 15 emerging pollutants in drinking water by at least 50%. Pharmaceuticals and chemicals that are not yet controlled by the Environmental Protection Agency or Health Canada include: atenolol, bisphenol A, carbamazepine, DEET, estrone, linduron, nonylphenol, phenytoin, trimethoprim, and trimethoprim sodium.

Check out our troubleshooting guide for assistance if you are having difficulties installing the water filter in your refrigerator.

How to Change the Water Filter on a Samsung Refrigerator

You’ve been ignoring the Change Water Filter Indicator on your Samsung refrigerator for a little bit longer than you should have. If this is the case, don’t waste any more time! Follow these simple step-by-step directions to learn how to replace the water filter in your Samsung refrigerator. It is critical to change your Samsung water filter on a regular basis for the health of your family and your refrigerator! A clean water filter installed in your Samsung french door, four flex, or side-by-side refrigerator may make a significant impact in the quality of your drinking water and food preparation.

Step-by-Step: How to Change the Water Filter on a Samsung Refrigerator

If you don’t have technical skills, changing your water filter is a breeze thanks to a Samsung design. You can begin by following the steps outlined in this document.

Step 1: Purchase the Correct Samsung Water Filter

We strongly advise you to get the Samsung Factory Water Filter. If at all possible, stay away from knock-off brands. Although they are less expensive, the quality is not similar. The Samsung Factory Water Filter may be purchased online through Amazon, with most items shipping the same day on conventional Prime or free 2-hour delivery on Prime Now, depending on the product. We encourage that you sign up for the Amazon Subscribe and Save program in order to save money on future purchases. To ensure that you never have an out-of-date water filter again, schedule your water filter to be delivered automatically every five months.

Step 2: Verify you have the right part!

Refrigerator water filters are model number specific, which means that you must use the exact filter for your refrigerator and not just any water filter. WARNING: Before opening the package, double-check that you have the appropriate filter. It is not possible to return the water filter once it has been installed. The water filter component number DA29-00020B (shown below) is used in the majority of Samsung french door, four flex, and side-by-side refrigerators; nevertheless, it is important to check the refrigerator model number to ensure that you are purchasing the proper filter for your product.

You might be interested:  What Is Samsung App

See the following specifications for further information: Your Samsung water filter will be sent with a new water filter, an instruction manual, and sticker reminders for the filter’s expiration date.

Step 3: Locate the Samsung Water Filter on Your Refrigerator.

The position of the water filter is determined by the setup of your Samsung refrigerator. French DoorsFour Flex models have a water filter that is situated between the produce drawers and the French DoorsFour Flex models’ fresh food area (as pictured below).

Samsung side-by-side refrigerators are equipped with a water filter, which is positioned on the fresh food side of the bottom drawer on the right-hand side of the unit.

Step 4: Prepare the Filter for Installation

Simple removal of the plastic wrapping and removal of the top cap are all that is required to ready the filter for installation. A well designed filter will look something like this.

Step 5: Install the Samsung Water Filter

Installing the water filter is accomplished by turning the filter knob to the left. It takes approximately 1/4 turn to unlock the filter. If possible, you should be able to remove the filter without having to switch off the water supply. To release the filter, slowly move the refrigerator forward and switch off the main water supply. In order to install the replacement filter, screw it into place with a quarter-clockwise turn. When the filter is locked in place, you may hear a pressure noise, which is completely normal.

Step 6: Purge 1 Gallon of Water

1 gallon of water should be sent through the filter. For the first 3-5 seconds, you may hear some air in the lines. This is quite normal. Remove the water from the container. It’s now time to put your water dispenser to work!

Step 7: Reset the Change Water Filter Indicator

By pressing and holding the Crushed Ice button for three seconds, you may reset the Change Water Filter Indicator light. Do you need assistance with the water dispenser or ice maker on your Samsung refrigerator? For Samsung Certified Care on your refrigerator, get in touch with Unique Repair Services.

How to Install Samsung Refrigerator Water Filter DA29-00020A

You’re thinking of replacing your own water filter, right? That’s a great concept! Replacing your refrigerator water filter on your own may save you a significant amount of time and money. Let’s get started. The entire procedure should take no more than 10 minutes if everything is done correctly. First and foremost, you’ll want a replacement air filter for your system. Replacing water filters may be obtained from a variety of sources, including your local appliance parts store, Lowe’s, or an internet vendor such as

The steps outlined below illustrate how to replace the Samsung Refrigerator Water Filter DA29-00020B in your refrigerator.

This filter is also compatible with a limited number of Kenmore refrigerators (see below).

How to Change Samsung Water Filter DA29-00020B

Step 1: Locate the model number of your refrigerator. Model numbers are situated within the refrigerator, most frequently on the left side wall of the appliance. The following are examples of Samsung refrigerator models that are compatible with the DA29-00020B filter: Fits Refrigerators from Samsung

  • RSG307AARS
  • sRF23J9011SR
  • sRS261MDWP
  • sRS267TD
  • sRF4287HARS/XAA
  • sRS265TDRS
  • sRS261MDBP
  • sRS261MDRS
  • sRFG298HDRS

Before purchasing a water filter, double-check that the model number of your refrigerator is compatible with the filter you’re considering. It is really helpful when purchasing appliance filters on Amazon to utilize the model number checker (find the Model Number Checkerunder the main menuwhen purchasing parts). Step 2: Determine the location of your water filter housing. The water filter housing will have the appearance of a knob. There are two possible locations for this component: either inside of the refrigerator section near the crispers, or on the outside of it at the toe grille.

  • The third step is to turn off the water supply.
  • Carefully pull the refrigerator forward in order to gain access to the water shutoff valve located at the rear of the unit.
  • Step 4: Discard the previous filter.
  • The old filter should be disposed of after it has been removed using a knob-style cap.
  • The knob-style cap should be placed on the rear of the new filter.
  • The filter should be replaced by twisting the knob counterclockwise until it is secure.
  • Step 6: Reconnect the water supply.
  • 7.
  • For a few seconds, you may notice that the water sputters a little.
  • You’re now ready to take a drink.
  • Press and hold the water filter reset button for 3 seconds to reset the water filter.

Your refrigerator will notify you when it is time to change the filter again in 6 months or 300 gallons, whichever comes first. With Your Subscription, You’ll Save $15 on Labor. To receive tips and ideas, as well as a discount on appliance repair work, subscribe to our monthly newsletter.

How to Replace Your Samsung Refrigerator’s Water Filter

Every filter ultimately becomes ineffective. When the indication light on your Samsung refrigerator illuminates or your water begins to taste foul, it’s time to replace the filter in your refrigerator. Different refrigerator models employ different filters, however partDA29-00003G is universally applicable to the vast majority of Samsung fridges. Order the new item and follow the instructions outlined below to put it in place:

1. Unplug your refrigerator and turn off the water supply.

Before beginning any repairs, ensure sure that the item is completely disconnected from the power source. It is necessary to switch off the local water connection while working on the filtration system since you will be removing components. This will be located either behind the refrigerator or under the sink, depending on your preference.

2. Remove the old filter.

The water filter housing may be found towards the top of the refrigerator in the rear if you open the door and look in the back corner. The process of removing the component is straightforward. Twist the filter’s body in a clockwise direction until it comes loose. Then pull it all the way down and out. Set it aside for now.

3. Install the new water filter.

Attach the tag that indicates the month of installation to the new filter before you begin installing it. If the water begins to taste bad before the indication light illuminates the next time, this will assist you in keeping track of when it should be changed next time. After that, take the red top from the filter and position it so that the locking tabs are towards the front and back of the refrigerator. Additionally, the sticker should be placed on the left side of the filter so that it can be seen when it is fitted.

Then twist it in the opposite direction of the clock until it feels snuggly in place.

Turn on the water and connect your refrigerator to the wall outlet.

Additionally, by pressing and holding the ‘ice type’ button for three seconds, the indication light will be reset.

How to Change Water Filter on Samsung Refrigerator

Purchasing the proper water filter for your Samsung refrigerator can be a difficult task, and you may be unclear of how to go about installing the filter correctly. Change your Samsung Water filter at least once every six months in order to ensure the health of you and your family members. Is it difficult for you to understand how to change the filter on your Samsung refrigerator? You will no longer be perplexed by the situation. In this article, Swift Green Filters provides a thorough explanation of “how to change a water filter on a Samsung refrigerator?”.

Additionally, we’ll explain all you need to know about replacing the water filter on a Samsung refrigerator before you purchase aSamsung Refrigerator Water Filter Replacement in this blog post.

Find the Correct Samsung Refrigerator WaterFilter Part Number for your

When it comes to replacing the Samsung water filter, the first and most important step is to identify the exact filter part number for your Samsung refrigerator. In order to accommodate different Samsung refrigerator models, several types of water filters are used. Samsung refrigerator water filters are divided into several groups based on their sizes and forms. Among these categories are: It is necessary to first identify the right water filter for your Samsung refrigerator before attempting to replace the water filter on the Samsung refrigerator.

Alternatively, if you are unfamiliar with any of these terms, you may quickly locate your appropriate Samsung refrigerator water filter by visiting this page:

Step by Step Solution to Learn How to Change the Water Filter on your Samsung Refrigerator

Swift Green Filters has simplified the process for you if you are faced with the question of “how to change Samsung water filter.” In order to make things as simple as possible for you, we will walk you through the process of locating the Samsung refrigerator water filter, removing the Samsung refrigerator water filter, and finally installing the Samsung water filter. You don’t need any technological knowledge to complete this task on your own.

  1. The following is the right replacement filter for your Samsung refrigerator: You may choose from a variety of appropriate water filters on the market that are designed to work with your Samsung refrigerator. While making a purchase, you may search for a certain filter part number or refrigerator model number. Make certain that you are selecting the appropriate filter for your Samsung refrigerator. Find the finest replacement water filter for your Samsung refrigerator. Examine your part to ensure you have the correct one: Each Samsung Refrigerator may utilize a unique model numberfilter part number. It implies that you must have the proper water filter for your refrigerator–not just any water filter will suffice
  2. And Locate the Samsung Water Filter on your refrigerator by following these steps: Finding the position of the Samsung refrigerator water filter is not a difficult task, but it might range from one Samsung refrigerator to another depending on the design
  3. Nonetheless, Prepare the filter for installation by doing the following: The following stage in the installation of a Samsung water filter is to prepare the filter for installation. To do this, you must first remove the plastic wrapping from the bottle and then unscrew the top cap. Make careful to switch off the water supply before removing the old Samsung refrigerator water filter so that the pressure does not become a hindrance during the removal process. Depending on the filter model you’re using, you’ll need to spin it counterclockwise, clockwise, or pull it straight out of the housing. Replacement of Samsung Water Filter: When replacing the old filter with a new one, make sure you follow the instructions in the handbook exactly. Simply pressing and holding down the water selector switch for three seconds will reset the Change Water Filter Indicator.
You might be interested:  What Channel Is Fox On Samsung Tv

The following is a list of the most popular replacements for Samsung Refrigerator Water Filters that we sell. If you are currently using one of the refrigerator water filters listed below and would want to replace it, purchase the water filter that is most suitable with your Samsung refrigerator. In addition to DA2900020B,RF4287HARS,RF263BEAESR, HAFCIN, DA2900003B, DA29-00003F, and DA29-0002B, DA97-06317A, ES-1, and 9101 are also included in the list of DA2900020AH. ere, we’ve attempted to clarify all of the stages in a straightforward manner.

If you are still having difficulties replacing the water filter in your Samsung refrigerator, please do not hesitate to contact Swift Green Filters for more assistance or advice.

Shop By Category

Swift Green Filters provides a large selection of filtering products. This product is a suitable Replacement Water Filter for your existing water filter. The above-mentioned brands have neither commissioned or supported the development of this filter. Swift does not represent any of the brands mentioned above. All of the brand names and part numbers that have been mentioned have been used solely for the purpose of reference. Swift Green Filters is an independently owned and operated company.

The maximum liability is equal to two times the cost of the goods.

How to Change a Water Filter on a Samsung Refrigerator

Home-improvementMany Samsung refrigerator models come equipped with a water filter. This water filter is designed to remove impurities from your drinking water that you don’t want there. Dispensing the filtered water from the water dispenser is a simple process. The filtered water is also utilized to generate ice in the refrigerator’s ice maker, which uses the filtered water to do so. if (sources.length) then this.parentNode.removeChild(sources); else this.onerror = null; this.src = fallback; if (sources.length) then this.parentNode.removeChild(sources); else if (sources.length) then this.parentNode.removeChild(sources); else if (sources.length) then this.parentNode.remove ‘/public/images/logo-fallback.png’) is a fallback logo image.

” loading=”lazy”> ” loading=”lazy”> The water filter in a Samsung refrigerator is located in the back-right corner of the refrigerator, at the top of the refrigerator.

  1. Turn the water shutoff valve to the left to turn off the water. The shut-off valve may be found behind the refrigerator, near the water line
  2. It is located in the basement. In order to remove it from the shelf below the water filter, pull it out. The filter should be turned counter-clockwise until it no longer rotates
  3. Remove the filter by pulling it downward. Place the new filter in place and tighten it by turning it counterclockwise. Replace the tray with a new one. Water may be turned back on by turning the shut-off valve to the right (see illustration).

The Drip Cap

  • A water filter is included in a number of Samsung refrigerator models. Dispensing the filtered water from the water dispenser is the first step. Water may be turned back on by turning the shut-off valve to the right (see illustration).

How To Replace The Samsung Food Showcase Water Filter

Water and ice dispensers are included in the Samsung Food Showcase refrigerator, and the dispensers are fitted with an impressive filtering function. It improves the flavor, eliminates the odor, and removes particles from the food. This guarantees that every pore in your body receives clean and fresh taste water. The filter indication light on the refrigerator panel allows you to keep track of how much filter is being used. Whenever the filter indicator is either blue or green, this indicates that your filter has at least 90 percent of its usable life left in it.

  1. This warning indicates that you should change your water filter before the signal turns red.
  2. When it comes time to install a new water filter, the HAF-CIN Refrigerator Water Filter (HAF-CIN/EXP) should be used instead of the standard water filter.
  3. Make sure that the water supply to your refrigerator is turned off before you begin removing the old water filter.
  4. A cloth or dish will come in helpful when you need to remove the filter from the machine.
  5. Remove the old cartridge by slowly turning it counter clockwise a quarter of the way and removing it.
  6. Insert the replacement filter cartridge so that the lock sign is pointing to the left on the side of the machine.
  7. When you’ve finished filling the cartridge, press the stop and lock icon.
  8. Replenish the water supply and dispense the water for approximately 6 minutes, or approximately 3 gallons, to thoroughly flush the system.
  9. The last step is to open up the refrigerator door and check for any leaks around the filter area.
  10. We recommend that you only use authentic Samsung replacement water filters, which can be acquired at authorized Samsung service locations, to ensure the highest quality.

How To Change Your Samsung Fridge Water Filter

Samsung refrigerators are among the most popular models on the Australian market. Homeowners like the built-in usefulness of their cabinets because of the diverse selection of functions and styles available. On a daily basis, the Samsung refrigerator filter supplies your family with clean, fresh, filtered water and ice. Each Samsung water filter has a lifespan of around six months, however some may need to be replaced sooner if they are used often or if the water is exceptionally harsh. The fact that your Samsung refrigerator’s filter indication light has begun to illuminate indicates that it is time for you to replace your old filter with a new one.

The process of selecting the appropriate water filter for your Samsung refrigerator, much alone installing it, might seem difficult at first, but it can be completed in a few simple steps.

Where Is the Water Filter on My Samsung Fridge?

In order to purchase a new Samsung water filter, you must first determine the model of Samsung water filter you currently own. You will be able to purchase the appropriate replacement because of this. Discount Fridge Filters assists clients in locating the appropriate filter for their refrigerators depending on the model number of the refrigerator. Other brands of refrigerator filters may be used to replace the filter in a Samsung refrigerator and perform just as well; however, you must know the model number of your refrigerator in order to obtain suitable fridge filters.

If you are having trouble identifying the model number of your Samsung water filter, you may watch the video below.

It is possible for your water filter to be installed in three different locations.

In some versions, the water filter will be located on the top right inside or at the back of the refrigerator.

Do You Have To Turn Water Off To Change Your Samsung Refrigerator Filter?

Samsung refrigerators with internal filters are equipped with an auto shut off valve, which eliminates the need to turn off the water to change the filter. Because customers have experienced installation issues as a result of shutting off the water, causing air locks and other issues, we do not recommend shutting off the water supply. When customers turn the water supply back on, they may experience sputtering water or even no water coming out of the faucet. Samsung refrigerators with external filters, on the other hand, nearly usually require the water to be turned off before the filters can be swapped out or replaced.

If this is the filter you require, turning off the water supply is a critical step in ensuring that you do not have a flood of water from this connection when changing your filter.

However, reducing pressure by dispensing some water is usually always a preferable choice.

How To Change An Internal Water Filter on a Samsung Refrigerator

Determine the placement of the water filter in your refrigerator. 2. Remove the old filter by lifting the protective cover (if your filter type has one) and turning it counter-clockwise to dislodge it. Alternatively, if it is difficult to lift, it is possible that pressure has built up; dispense some water and try to relax it before tugging it again. 3. Take your new filter out of the packing and remove the protective cover from it. 4. Press in the new filter and spin it clockwise until its lock symbol is aligned with the arrow.

  1. Replace the old filter.
  2. Replace the filter cap, if your filter type has one, and run several litres of water to confirm that the water has been adequately filtered and that any air has been drained out of the line.
  3. This assures that there will be no leaks in the future.
  4. Reset the filter-indicator light on the inside of your refrigerator.
  5. The indicator light should return to its original state of green.

You may also go to the user manual that came with your Samsung refrigerator for complete instructions on how to change the water filter and reset the indication light on the refrigerator.

How To Change An External Water Filter on a Samsung Refrigerator

1. Locate the isolation valve, which should be situated somewhere along the water supply line to the refrigerator. Turn it off if it’s on. Using the water outlet located near the refrigerator, depressurize the system by drawing a large glass of water. 2. Have a bucket and a towel handy in case there is a tiny amount of water spilled throughout the operation. The old filter should be removed by depressing the locking collars at either end of the filter with your thumb nail (or something similar) while simultaneously pulling out the water supply line from the filter.

  • It is possible to hold down the locking collar with your fingers or with a solid edged item, which will allow the hose to slip out with relative ease.
  • We recommend that you use a sharp object, such as a Stanley knife.
  • 4.
  • For this, you may either place the filter under a running faucet and let the water to flow directly into a sink, or you can submerge the filter in a bucket or other container of water.
  • 5.
  • The line will go in approximately 5 – 10mm and you will be able to fully put the filter into place.
  • After you’ve placed the filter in the bucket, switch on the water supply and allow approximately 5 litres of water to run through the filter and into the container.
You might be interested:  How To Unlock Samsung Galaxy S8 Free

After you have turned off the water supply, connect the line that flows into the refrigerator.



If the filter light on your Samsung refrigerator does not come back on, press and hold the “Ice Type” or “Moisture Control” buttons as well as the Child Lock button for three seconds.

Avoid holding the buttons for an excessive amount of time, since this may force the procedure to restart, requiring you to release all of the buttons and hold them again until the light changes to green again.

Can I Run My Samsung Refrigerator Without the Water Filter?

Water filters are designed to eliminate toxins such as lead, mercury, chlorine, and other contaminants from your drinking water and ice, among other things. The majority of Samsung refrigerators may still work well even if they do not have a water filter installed. In spite of the fact that rotary valves in your refrigerator may bypass the water filter and provide you with water even when there isn’t a water filter installed, this does not imply that you should continue to use your Samsung refrigerator in this manner.

At first, you may be unsure about how to replace your water filter.

In the event that you do not change your old filter after 6 months, you may face mineral buildup, which may result in your refrigerator experiencing costly malfunctions. You may also notice that your water and ice have a weird flavor or odor, which you should investigate further.

Tips on How to Change Your Samsung 3G 3F Filter Head Alignment

A misaligned head of a Samsung 3G 3F water filter might cause difficulties if the filter is used. If you have a Samsung 3G 3F water filter, you may face problems if the head gets misaligned. We have covered the basics of this straightforward repair procedure in a few steps. You may quickly correct the alignment of your water filter by watching the video provided below.

Where Can I Buy a Samsung Refrigerator Water Filter?

At Discount Fridge Filters, we can assist you in selecting the appropriate filter and ensuring that it is compatible with the Samsung refrigerator model that you have purchased. On the market, there are many different types of water filters to choose from, and you can save money by selecting one from our extensive inventory. Please do not hesitate to contact us at any time if you want assistance in selecting the appropriate water filter. We would be pleased to answer any questions you may have and to provide you with guidance on how to go about installing it.

How To Reset The Water Filter Indicator On a Samsung Fridge.

There are currently no goods available in this category. The Water Filter Light Can Be Reset On Page 1 of 2 The water filter indication light on your refrigerator is illuminated. Normally, the indication light has a bright blue color. The color of the indicator light changes every 6 months, or after about 400 gallons of water have passed through the dispenser. It will eventually turn purple or crimson. Remember that if the indication light on your dispenser changes but the ice maker or water pressure from the dispenser continues to function properly, you do not need to replace the filter.

It is important to note that if the light is already off or blue, there is no need to reset the indicator light.

For instructions on how to reset the water filter indication light, see the procedures below: To reset your filter, look for the button on your display panel that has the words “Hold 3 sec for filter reset” printed on it.

It is the button in the middle of the control panel on the left side of the screen.

Resetting The Water Filter Indicator

Unless the ice production and/or water pressure are abnormal, and the indicator is illuminated, it is not necessary to replace the filter. Just bear in mind that when ice production and water pressure begin to deteriorate, it is necessary to replace the water filter. Perform the following steps to reset the water filter indication light: 1.

Find the Alarm button on the control panel and press it. It is the button in the middle of the control panel on the left side of the screen. 2. Press and hold the button for a few seconds until the indication light turns off (approximately 5 seconds).

Will the Water Dispenser on the French Door Refrigerator Work Without a Water Filter Installed?

Is it necessary to switch off the water in order to change the filter? the question was posed on August 11, 2013 1-10 of 28 responses are shown. It was only a matter of turning off the main water supply. In any other case, the filter wouldn’t fit correctly and would begin to leak. 8/2021 This was useful to 3 out of 3 people. Do you agree? |File a report of abuse I’m not sure if anyone else has said this in the past 7 years, but I’d like to add it for those who are concerned about moving the refrigerator: you can turn off your water where it enters your house or at the road if you don’t know where the shut off is; it’s important to learn where it is before moving the refrigerator.

Finally, I was unable to install the replacement filter until I switched off the water supply.

Do you agree?

You never know when someone else will be experiencing the same issue.

I had the same problem with my Samsung, where I couldn’t turn off the filter.

Someone recommended using pliers with a rubber or plastic tip.

read on for more information Despite the fact that this is an old post, I chose to respond.

No, there is no need to shut off the water supply.

No matter how hard I tried, nothing worked.

I didn’t have exactly what you were looking for, but I did have something comparable in my jewelry-making tools box.

It is recommended that you turn the screw 1/4 turn, however if the first turn does not work, you can spin the screw another 1/4 turn.

view fewer images Despite the fact that this is an old post, I chose to respond.

No, there is no need to shut off the water supply.

No matter how hard I tried, nothing worked.

I didn’t have exactly what you were looking for, but I did have something comparable in my jewelry-making tools box.

It is recommended that you turn the screw 1/4 turn, however if the first turn does not work, you can spin the screw another 1/4 turn.

This was useful to 8 out of 9 people.

|File a report of abuse Because I rotated the water filter left to loosen it, the endcap on the fridge fell off while still screwed in, spraying water all over the kitchen floor.

It was the manufacturer’s original water filter, which had been fitted.

My recommendation is to turn off the water!

Do you?|Do you want to report abuse?

I’ve owned two Samsung side-by-side refrigerators, and I’ve used them in both configurations.

Due to the fact that you are pushing and locking in the new one against the water, it was quite difficult to push and lock it in place at the time.

read on for more information It’s likely that you should.

The first time, I just ripped it out of the socket.

The second time, I actually destroyed the filter unit inside the refrigerator because it wouldn’t lock into place.

Until a technician could arrive and fix it, I was without running water or ice until they arrived.

It was my first time replacing it.

In addition, I was able to clean out all of the debris that had gathered under the refrigerator.

I really like the idea of shifting the water line to the interior of a cabinet – that’s brilliant!

I’ve owned two Samsung side-by-side refrigerators, and I’ve used them in both configurations.

Due to the fact that you are pushing and locking in the new one against the water, it was quite difficult to push and lock it in place at the time.

I was frustrated.

I went ahead and removed the fridge out of the cabinet and switched off the water.

It was SO MUCH EASIER, and there was no leakage of water.

It’s a hassle to take it out and turn off the water, but that’s the only way I’m going to do it from now forth.

This was useful to 7 out of 7 people.

You should switch off the water if the water filter is located at the bottom or on one of its sides, rather than at the top jutting out of the ground.

Once the water pressure is turned off, the pressure will be released effortlessly.

This was useful to 1 out of 2 people.

|I did not file a report of abuse.

Then you may turn off your alarm.

The filter should be able to be removed immediately.

Do you agree?

1) It was more difficult to take off the filter.

I’m going to turn off the water.

This was helpful to 1 out of 1 people.

I turned off the ice producers on both sides of the refrigerator.

The filter came out with relative ease.

This was useful to 2 out of 2 people.

It’s as simple as rotating and pulling out the old filter, then inserting and rotating the new filter. There is no need to turn off the water because a water valve is located at the filter connection. This was useful to 6 out of 8 people. Do you?|Do you want to report abuse?

Leave a Reply

Your email address will not be published. Required fields are marked *