- 1 Why Your Android Phone Won’t Connect to Your PC: 7 Fixes
- 2 1. Check the USB Connection Mode on Your Phone (Windows/Mac)
- 3 2. Update the MTP USB Drivers on Your Computer (Windows)
- 4 3. Use the Android File Transfer Utility (Mac)
- 5 4. Use a Different USB Port and USB Cable (Windows/Mac)
- 6 5. Update Your Operating System Version (Mac)
- 7 7. Run Windows Device Troubleshooter (Windows)
- 8 Bonus Tip: Use an Alternate File Transfer Method
- 9 Keep Your Android and Computer Connected
- 10 News & Latest Articles
- 11 Is Your Samsung Phone Connected To The PC?
- 12 Check your Samsung Phone for Hardware Problems
- 13 Samsung Mobile Phone USB Mode
- 14 Download Android Smart Switch and Update Drivers
- 15 Restart PC to Reinstall Windows 10 Device Drivers
- 16 Set up Link to Windows with your Galaxy phone and Windows 10 or 11 PC
- 17 My Computer Doesn’t Recognize My Android Phone (Samsung Galaxy/HTC/LG/Sony)
- 18 How To Fix ‘Computer Not Recognizing Android Device’ Problem
- 19 Method2: Make sure you have selected the right connection setting
- 20 Method3: Enable USB Debugging
- 21 Method4: Try updating or reinstalling your device’s driver
- 22 Method5: Try uninstalling your device’s driver
- 23 8 Fixes to try if Android Phone is not recognized by PC-Carlcare
- 24 How to Get Your Android Device to Show up in File Explorer (If It Isn’t)
- 25 Start with the Obvious: Restart and Try Another USB Port
- 26 Is Your Phone Connected As Storage?
- 27 Update Your MTP Driver
- 28 Your question: How do I get Windows 10 to recognize my Samsung phone?
- 29 Why does my computer not recognize my Android phone?
- 30 Why my phone is not connecting to PC through USB?
- 31 How do I link my Samsung phone to my PC?
- 32 Should I link my Android phone to Windows 10?
- 33 Why doesn’t my PC recognize my Samsung phone?
- 34 How do I turn on MTP mode?
- 35 Can I connect my Android phone to my PC?
- 36 How do I enable MTP on my Android?
- 37 Why is USB tethering not working?
- 38 Why USB is not detected?
- 39 How do I enable USB preferences?
- 40 Where is USB settings on Android?
- 41 4 Methods to Fix Android Phone Not Recognized but Charging
- 42 Solution 1. Connect Android to Computer as MTP to Fix Charging Only Problem
- 43 Solution 2. Update or Install Proper Driver for Android USB Driver Not Working Problem
- 44 Solution 3. Install Necessary Kit for Windows 10 to Fix Android Not Detected Problem
- 45 Solution 4. Try a Trick to Fix Android Not Recognized Problem Caused by Hardware
- 46 Top Solutions to Fix Windows 10 Not Detecting Android Phone
- 47 Solution 1: Restart Android Phone/Windows 10 Computer
- 48 Solution 2: Use a different USB cable
- 49 Solution 3: Check USB Computer Connection Settings
- 50 Solution 4: Enable USB debugging
- 51 Solution 5: Install the Correct USB Drivers
- 52 Solution 6: Turn on Airplane mode
- 53 Solution 7: Reinstall Android Drivers
- 54 Solution 8: Update MTP USB Device Driver
- 55 Solution 9: Install Media Feature Pack
- 56 Solution 10: Reboot Phone into Odin Mode
- 57 Solution 11: Install a PC suite
- 58 Solution 12: Use a Third Party App
- 59 Solution 13: Delete Unwanted Files from Your Phone
- 60 Solution 14: Reinstall Android Composite ADB Interface
Why Your Android Phone Won’t Connect to Your PC: 7 Fixes
Have trouble getting your Android phone to communicate with your computer? Several factors might contribute to this, including an inappropriate connection mode or a lack of properly installed drivers. Even the tiniest problem might prevent your PC from properly recognizing your device. You can try each of the ways listed below one at a time if you’re not sure what’s causing the problem. Each advice addresses a specific issue with your phone not connecting to your PC, so keep trying them until you find one that works for you.
1. Check the USB Connection Mode on Your Phone (Windows/Mac)
When connecting your Android device to your computer, you have a choice of several different connectivity options. Each mode serves a distinct function, and some of them may prevent your phone from appearing on your computer altogether. It is possible to get your computer to identify your phone by changing the connection mode on it. Here’s how you can go about it:
- Make use of a USB cable to connect your phone to your computer. Bring the notification bar to the bottom of the screen and you should notice anAndroid systementry that displays the current connection mode. To access the USB Preferences page, select the connection mode option from the drop-down menu. SelectFile Transfer from the drop-down menu.
With the help of a USB cable, connect your phone to your computer. You should notice anAndroid systementry that displays the current connection mode if you pull down the notification bar from the top of the screen. Open the USB Preferencespage by selecting it from the connection mode drop-down list; Transfer a file by selecting it from the drop-down menu
2. Update the MTP USB Drivers on Your Computer (Windows)
To utilize your phone as a media device on your computer, you must first enable the MTP mode on your phone’s settings menu. This needs that you have MTP drivers installed and up to date on your computer in order to accomplish this. Those drivers are already installed on the majority of machines. Using the Device Manager, you may simply update them if they are out of date, as follows:
- Make use of a USB cable to connect your phone to your computer. To open the Device Manager, press the Windows key + X together. To make it larger, double-click on Portable Devices. Locate your Android device, right-click it, and select Update driver from the context menu. SelectLook for driver software on my machine by browsing my hard drive
- Allow me to select from a list of available drivers on my computer by clicking Allow me to select from a list of available drivers on my computer SelectMTP USB Device from the drop-down menu and press Next.
After the drivers have been updated, your phone should be able to function as a media device.
3. Use the Android File Transfer Utility (Mac)
Unlike Windows, you are unable to transfer files straight from Android to a Mac computer. To begin, you must first download and install a software on your Mac that will serve as a link between your Mac and your Android smartphone. Android File Transfer is the name of this tool, which you can get from the official Android website:
- The Android File Transfertool may be downloaded from the Android website. Activate the downloaded file by dragging it to your Applicationsfolder on your computer. To activate the utility, double-click on its icon in yourApplicationsfolder (or search for it using Spotlight by pressing Cmd + Space on your keyboard)
- Use a USB cord to connect your Android phone to your computer. When you open the newly installed utility, your phone should be listed.
Once you’ve located your phone, you can begin shifting your files around as you see fit.
4. Use a Different USB Port and USB Cable (Windows/Mac)
If you’ve tried everything listed above and are still experiencing problems, it’s possible that the USB port or cable you’re using is faulty or broken. Your computer will be unable to recognize your device as a result of this. Fortunately, most laptops are equipped with numerous USB ports. Try connecting your phone to a different port on your computer to see if it works. You should also try connecting with a different USB cable to see if it helps your computer detect your device more quickly and accurately.
5. Update Your Operating System Version (Mac)
You can connect your Android phone to your Windows computer regardless of the operating system version you are using.
Older macOS versions, on the other hand, may have difficulties connecting to Android devices on Macs. Therefore, if you are experiencing connectivity problems between your phone and computer, you might consider updating your macOS version. This can be accomplished in the following ways:
- You can connect your Android phone to your Windows computer regardless of the version of the operating system you are currently using. Android connections, on the other hand, might be problematic for Macs running earlier versions of the macOS operating system Whenever you experience connectivity troubles between your phone and computer, you should consider updating your Mac OS version. To do so, take these steps:
Some phone manufacturers, such as Samsung, provide their own proprietary connection options, such as SideSync. These tools can occasionally cause issues with the conventional Android connection techniques, resulting in your computer failing to identify your phone at all. If you have any of these tools installed on your computer, you should consider uninstalling them to avoid conflicts. After that, reconnect your phone to your computer and check to see whether everything is functioning normally.
7. Run Windows Device Troubleshooter (Windows)
Windows 10 has a number of troubleshooting tools to assist you in identifying and resolving issues relating to various aspects of the operating system. One of these, fortunately, is to troubleshoot external devices such as your Android phone and tablet. You may enlist the assistance of this tool to resolve connectivity difficulties and enable your phone to appear on your computer screen. Despite the fact that it is not always ideal, it is worth a shot. Even though Microsoft has deleted the Hardware and Devices troubleshooter from its list of options in the most recent versions of Windows 10, it is still accessible via the command line as follows:
- Press Win + X and select Windows PowerShell (Administrator) or Command Prompt (Administrator) from the drop-down menu
- Type the following command onto your computer: with the command msdt.exe -id DeviceDiagnostic
- You’ll notice theHardware and Devicetroubleshooter when you first open it. To allow the program to detect problems with your devices, click Next. When it is finished, it will provide suggestions for how to resolve the issues that have been identified.
When using an older version of Windows 10, you can locate the tool by following the steps outlined in this article:
- LaunchSettingson your computer, click UpdateSecurity, and then selectTroubleshootfrom the left-hand sidebar. To start the devices troubleshooter, choose Hardware and Devices from the list and then click on it.
Bonus Tip: Use an Alternate File Transfer Method
If your phone does not connect to your computer, no matter what you do, you may want to consider using one of the other ways for transferring data from Android to your PC. At the very least, you’ll be able to begin your files moving while your connection problem is being repaired.
Keep Your Android and Computer Connected
At first glance, it may appear as though your computer will never be able to recognize your device. However, using the methods outlined above, you should be able to properly mount your phone on your computer and transfer data between the two devices. Not to mention the fact that you may also transfer data in the other direction, from your computer or laptop to your phone. If you are having difficulties with this as well, some of the suggestions above may be of assistance. 5 Methods for Transferring Files From a Computer or Laptop to an Android Phone Do you need to transfer information from your laptop to your Android device?
Read on to learn more about the author.
With over 8 years of experience creating computer how-to manuals, he’s covered many different themes in his work.
Mahesh Makvana has more to say.
Sign up for our newsletter to receive tech tips, reviews, free ebooks, and special offers! To become a subscriber, please visit this page.
News & Latest Articles
First and first, if your Samsung phone is unable to connect to your computer, the USB cable that you are using to connect it should be checked for damage.
Samsung recommended that you always use the original cable that came with your phone to connect to your computer or other devices. The following steps should be taken to ensure that the cable is not the source of the problem:
- First and first, if your Samsung phone is unable to connect to your computer, the USB cable that you are using to connect it should be checked for problems. If you want to utilize the original cable that comes with your phone, Samsung suggests that you do so always. To be sure that the problem is not caused by the cable, follow these steps:
Is Your Samsung Phone Connected To The PC?
If no information box appears when you insert your phone into your computer, it is possible that it is still connected.
- Using the ‘Windows icon’ in the bottom left corner of your computer screen, right click and pick ‘File Explorer’ to see if your phone is linked to your computer
- You should be able to locate your device in the left-hand column of the window, either under ‘This PC’ or under ‘Devices and Drivers.’
Check your Samsung Phone for Hardware Problems
If your computer is unable to recognize your Samsung phone, it is possible that the phone is experiencing a physical problem. Check to see if there are any difficulties with your phone.
- A physical fault with the Samsung phone may be the cause of the computer’s failure to recognize it. You should check your phone to see if there are any issues.
Samsung Mobile Phone USB Mode
When your phone is hooked into a computer, it might be in one of several distinct USB modes. You must first determine which mode your phone is currently in and then switch it to the relevant one in order to transmit data. When you plug in your phone, a notice window will normally appear, asking if you wish to transfer files from one device to another. If this does not occur, you can attempt the following steps:
- Starting with your notifications, you may access them by sliding your finger down from the top of the screen. An ‘Android System’ notification should appear if your smartphone is successfully recognizing the computer connection. For example, it may indicate ‘USB for File Transfer’ or ‘Cable Charging’ on the device. You will be able to alter the USB mode to ‘MTP’ or “Transfer Files” after selecting the notice.
Download Android Smart Switch and Update Drivers
If you have followed the procedures above and your Samsung phone still does not connect to your computer, it is possible that there is an issue with the device drivers. You might try installing Smart Switch and utilizing it to update the drivers on your computer automatically.
- Smart switch software may be downloaded. here
- If you want to update the device drivers on your Windows 10 computer, go to Start > All Programs > Accessories > Device Drivers > Windows 10 > Update Device Drivers. Locate and choose ‘Device Manager’ from your computer’s start menu
- You may find the Samsung driver by searching for it under ‘Universal Serial Bus Controllers (USB Controllers). The Samsung driver (which may be named anything like ‘Samsung Mobile USB Composite Device’) may be updated by selecting ‘update driver’ from the context menu. After that, follow the on-screen instructions to update the driver.
If you are attempting to transfer data from Samsung to Samsung and your Samsung phone is successfully connected to your PC, we have further instructions on how to transfer data from Samsung to Samsung using the Samsung Smart Switch available.
Restart PC to Reinstall Windows 10 Device Drivers
If upgrading the driver the first time does not resolve the issue, you might try removing the driver under ‘Device Manager’ and restarting the computer to see if it helps.
- In ‘Device Manager,’ select the device name from the drop-down menu and select ‘Uninstall.’ When you restart your computer, it will attempt to reinstall the driver the next time it is started.
If you have completed all of the instructions above and your computer still does not recognize your Samsung phone, the next step is to locate a reliable mobile phone repair shop to examine your phone and decide whether or not there is a problem that requires repair. Australian Mobile Phone Repairs specializes in iPhone repairs; thus, if you would like to schedule an appointment to have your phone fixed, please visit our appointments page. The majority of repairs are performed in about an hour.
If you are unable to visit one of our Brisbane stores, please contact us.
If there are any difficulties, we will replace genuine/original components at no additional charge for the parts in question.
KIOSK 21CAPALABACENTRAL SHOPPING CENTRE,MORTEN BAY RD, BRISBANE, QLD, 4157(07) 3245 4662KIOSK 21CAPALABACENTRAL SHOPPING CENTRE,MORTEN BAY RD, BRISBANE, QLD, 4157(07) 3245 4662
Redbank Plains Shop 69B Town Square Redbank Plains 357 – 403 Redbank Plains Road REDBANK PLAINS QLD 4301 (07) 3814 2864 (07) 3814 2864 Even if we are not in your immediate vicinity, we provide mobile phone screen repairs in Sydney, Melbourne, and throughout Australia with our freecourier service. Aussie Mobile Phone Repairs in the year 2022
Set up Link to Windows with your Galaxy phone and Windows 10 or 11 PC
Who has the luxury of switching back and forth between two gadgets on a regular basis? You won’t have to since your Windows 10 or 11 PC will be able to link your Galaxy phone and computer for smooth multitasking, saving you time and effort. You can easily mirror your phone’s screen, monitor alerts, transfer files and media, and answer to messages and phone calls all in one place. You can also utilize your favorite Microsoft programs on your phone, sync data across the two devices, and synchronize your calendars with your other devices.
On Mac computers, there is no link to the Windows operating system. Make sure your PC is up to date and that a Microsoft account has been created on it in order to make connecting your phone and PC as simple as possible. Windows should be updated.
- To check for updates, start by selectingStart, entering Check for updates, and then clicking it when it appears on the screen. Check for updates by selectingCheck for updates
- Allow for the download and installation of all of the updates
Add a Microsoft account to your profile.
- Select Start, then Settings from your computer’s start menu. Click on Accounts, and then click on Your information. When prompted, choose Sign in with a Microsoft account if necessary. Then, to complete the setup, simply follow the on-screen instructions.
If you work from home and find yourself frequently switching between your phone and computer, why not link the two devices together so that you can effortlessly sync papers, photos, and other files? Content from your phone will display straight on your computer, allowing you to see and send messages, or you may read texts on your phone and respond to them later on your computer. In addition, you may handle notifications from applications and widgets without having to touch your phone or touch the screen.
- If you have a recent Galaxy phone, it will come with the Link to Windows function pre-installed, which allows you to connect your phone to your computer without having to download any additional software. If it is not already incorporated into your phone, you may download it from the Google Play Store. Remember to check that your computer has a Microsoft account associated with it. Next, check to see if the Your Phone app has been successfully installed on your Windows 10 PC. It should be pre-installed on the majority of devices
- You may double-check by visiting this link: If it isn’t already installed, you may get it from the Microsoft Store by clicking here. Then browse to and launch theYour Phonecompanion app on your PC, and then click Get started
- After you’re through, close the program and restart it. If you are requested to login in to your Microsoft account, you should do so immediately. Enter your account credentials if necessary after selectingSign in. If asked, place a checkbox next to the statement “I have the Your Phone Companion – Link to Windows application available.” Please keep in mind that depending on your settings, you may be able to skip this step. SelectPair with QR code
- The code will be displayed when you have selected it. As soon as you’ve completed this step, access the Quick settings panel on your phone by swiping down from its top-left corner and tapping theLink to Windowsicon
- Click Continue on the screen of your phone after you’ve linked your phone and PC. The QR code that appears on the screen of your PC should be scanned. Continue by tapping Continue a second time and granting the various permissions
- To complete the connection between your phone and PC, follow the on-screen prompts on both devices. As soon as the procedure is complete, selectDone. The Your Phone app on your PC can now be used to answer calls and messages, sync images, and screen mirror your phone
- You are now ready to go. Once you’ve completed the setup, your phone and PC will normally need to be on the same network in order for the Your Phone app to function properly
- However, you can allow your phone to connect via mobile data. Open Settings on your phone, select Advanced features, select Link to Windows, and then select Use Mobile data from the drop-down menu. Please go to the Microsoft support article if you are having any difficulties configuring Link to Windows, or if you need to unlink any devices.
Other answers that might help
The Link to Windows function, which allows you to connect your phone to your PC if you have a recent Galaxy phone, is incorporated right into the phone. If it isn’t already installed on your phone, you may get it from the Google Play Store. Maintain your Microsoft account by logging in to your computer from a different device. Make sure that the Your Phone application is installed on your Windows 10 PC next. Generally speaking, most models should have it pre-installed; you may double-check by going to this website: The software may be downloaded through the Microsoft Store if it is not already installed.
- The use of your Microsoft account may be required in some circumstances.
- Choose “I have the Your Phone Companion – Link to Windows app ready” from the list of options if you are prompted.
- The code will be displayed when you selectPair with QR code.
- Click Continue on the phone’s screen after you’ve linked your phone and PC.
- Continue by tapping Continue a second time and granting the various permissions; Finish connecting your phone and PC by following the on-screen directions on both devices.
- The Your Phone app on your PC may now be used to answer calls and messages, sync images, and screen mirror your phone; you are now ready to utilize it.
- Typically, your phone and PC must be on the same network for the Your Phone app to function properly.
- Please refer to the Microsoft support article if you are having any difficulties configuring Link to Windows or need to unlink a device.
My Computer Doesn’t Recognize My Android Phone (Samsung Galaxy/HTC/LG/Sony)
In order to conduct various operations, such as file transfer, data backup, phone switching, and data recovery, Android users frequently link their PCs and Android smartphones/tablets via the USB connection on their computers. This task, on the other hand, should be absolutely uncomplicated, although this does not always work. On rare occasions, we are faced with the fact that our PC does not recognize the Android device that is attached to it as a USB storage device, as described above. The fact of the matter is that this is a really annoying situation.
Many forum users have written consulting solutions to this problem, and I have chosen to post a list of recommendations to help the PC identify and recognize your smartphone after doing a thorough investigation.
If you’re seeking for data recovery options for Android devices such as the Samsung Galaxy S and HTC One, check out this tutorial: how to recover deleted files from an Android phone.
Tips 1Changing USB Cable
As previously said, one of the first actions we must do in order to resolve this difficulty is to determine whether or not the USB cable is in excellent working order (or otherwise). It is recommended to try a different USB cable to see if it helps to resolve the issue. The availability of USB cables has increased significantly in recent years.
Tips 2Enable USB Debugging Mode
First, check to see if the “USB debugging” option is enabled on your computer. The current status may be found under the About phone-Developer choices. If you do not have this option enabled, you must go to “Settings” “About phone” and tap the “Build Number” button numerous times until it appears. Try to follow the three steps outlined above to enable USB debugging on different Android systems.
- For Android versions 2.3 and earlier, go to “Settings.” Select “Applications” from the drop-down menu. Select “Development” from the drop-down menu. Check “USB debugging”
- For Android 3.0 to 4.1: Select “USB debugging.” Type “Settings” into the search box. “Developer options” should be selected
- For Android 4.2 or later, check “USB debugging.” Type “Settings” into the search box. To learn more about your phone, go to “About Phone.” Tap “Build number” numerous times until you see the message “You are now in developer mode.” Return to the “Settings” page. Check “USB debugging” in the “Developer settings” section.
In many circumstances, you will need to activate USB debugging on your Android phone, such as when you want to recover data from your Samsung S6, or when you want to export Android texts to your PC. As a result, you should be familiar with the process of properly enabling USB debugging on your Android device, as you will be required to do it later on.
Tips 3Check Android USB Driver on PC
It is necessary to have an Android USB driver installed on your computer in order for your device to be recognized by it. If it was not installed or if it was corrupted, the computer will almost certainly not identify the Android phone. As a result, you must determine whether there was an issue with the Android USB driver. Checking the Android USB Driver on a PC is as follows:
- Navigate to “MyComputer” on your PC. Right-click the mouse and select properties from the drop-down menu. Select “Hardware” from the drop-down menu that displays. Select “Device Manager” from the drop-down menu. When you tap out a list, the following happens: Controllers for the Universal Serial Bus (USB). If there is no yellow mark, this indicates that the USB driver has been successfully installed on the computer. Please go to the next section. If you answered yes, you will need to download and install the Android USB driver.
Tips 4Reinstall Android Device Drivers
An increasing number of Android phones, as well as the associated software, are introduced each year. If the USB driver for the phone was out of current, this might also result in the phone not being detected by the computer. As a result, you must uninstall the old driver and then reinstall the most recent driver from the manufacturer’s website.
- Go to “My Computer” and select “Property”
- If the device is not recognized, right-click on it and pick properties from the drop-down menu. You mention that you need to install the device driver in the overview, which is correct. If this is the case, click on “change settings,” and a message stating that you must reinstall the driver or something similar will display. There is a button to click, and you will be asked whether you want the driver to be found automatically or inside the PC program. Click on the second choice
- I will now ask you to select the type of device you want
- You must select the one that says wire transfer or perhaps USB as the type of device you want. Click there, and the USB device will be installed, allowing you to read it.
I hope that some of these suggestions may be of use to you in resolving your issue. Thus, you may back up your phone data to your computer, root your phone, or retrieve deleted files from it. If you have any suggestions for alternate solutions, please share them with us. A new version of this article was published in 2017. With the most recent upgrade to the Android operating system, the phone is automatically recognized as a storage device. As a result, if you wish to recover lost files from Android, you need connect the phone as an MTP device instead.
This is given to you by the app TuneBro.
How To Fix ‘Computer Not Recognizing Android Device’ Problem
Computers not detecting your Android smartphone or tablet, regardless of the operating system you are using (Mac, Windows, or Linux), is an extremely frequent problem. Fortunately, there are a variety of successful approaches to coping with this problem. We are going to walk you through the process of discovering the reason why your Android smartphone is unable to communicate with your computer in this guide.
Method1: Try another port or cable
However, despite the fact that it seems too simple, occasionally the problem may be traced to a broken USB port or a USB cable that has been specifically intended for charging purposes.
Although the latter is a somewhat uncommon occurrence, it is one that should be taken into consideration.
Method2: Make sure you have selected the right connection setting
There are three connection choices accessible to Android devices connected to a computer, for those who are not familiar with the concept; charging, transferring files and transferring images. Charging is the default connection option, followed by transferring files and photos. ‘Charging’ is usually selected as the default. You must, however, pick the second option in order for your phone to appear on your computer.
- Remove the lock from your phone
- It’s necessary to slide your finger down from the top of the screen for the notifications menu to appear
- Select the ‘Android System’ checkbox. ‘Transfer files’ should be selected.
Method3: Enable USB Debugging
Enabling USB debugging mode on your Android smartphone is another option for dealing with the problem on your device. However, while this specific option is most commonly utilized when a user wants to control his or her device through a computer, a large number of users have noted that it may also be used as a workaround for this difficulty.
- Ensure that your Android smartphone is disconnected from the PC. Navigate to the Settings menu. Locate the ‘Developer Options’ section. Activate the ‘USB Debugging’ feature. A warning notice will appear
- Simply press OK to dismiss the notification. Connect your Android device to your computer once more.
Method4: Try updating or reinstalling your device’s driver
The USB drivers for the device in question are another typical source of the problem. It is possible that updating it will resolve the connection issue.
- Press the Windows key and the X key together. Choose ‘Device Manager’ from the drop-down menu. Select the ‘Portable Device’ area from the drop-down menu. To access your device’s name, click on it. Select ‘Update Driver Software’ from the drop-down menu. To find driver software, choose ‘Browse my computer for driver software’ and then ‘Let me pick.’. Select the MTP USB Device option and then press the ‘Next’ button.
Method5: Try uninstalling your device’s driver
A technique that is similar to the one described above is to remove your device’s driver and then unplug your device from your computer. Replug the device into your computer, and your computer will reinstall the drivers for it for you.
- Press the Windows key and the X key together. Choose ‘Device Manager’ from the drop-down menu. Select the ‘Portable Device’ area from the drop-down menu. To access your device’s name, click on it. Select ‘Uninstall’ from the drop-down menu. Click on the ‘OK’ button.
If you run into any difficulties when doing the above or have any suggestions, please let us know in the comments section below. I’ve filed it away. More information about Android and USB may be found here.
8 Fixes to try if Android Phone is not recognized by PC-Carlcare
If you’re having trouble connecting your Android phone to your computer using a USB connection in order to transfer some data, it’s a common problem that may be resolved in a matter of minutes. The problem of the phone not being recognized by the computer is most usually caused by an unsuitable USB cable, the incorrect connection mode, or outdated drivers, among other things. Hopefully, this post will provide you with a number of different solutions to the problem of the computer not detecting the android phone.
Connect your phone to your computer using the File Transfer/MTPI feature.
Even if you are not aware of it, the message “USB charging this device” appears in the notification panel of your smartphone.
Here’s how you can go about it:
- Connect your phone to your computer using a high-quality USB cable when it has been unlocked. As soon as your phone detects the connection, you’ll be notified via email or text message. After you have swiped down your notification panel, tap on theAndroid Systemnotification(USB charging this device). SelectFile Transfer (or MTP on some devices) from the drop-down menu.
By now, the data from your phone should have appeared on your computer. If your phone is still not detected by your computer, try one of the additional methods listed below. Developer settings allow you to configure your default USB setup so that you don’t have to go through the process every time you connect the phone. It is possible to access the developer options on Android, but they are buried and contain several experimental features, therefore it is not recommended that you try with any of them.
Activate it by going toSettingsSystemabout phoneand clicking onBuild numberseven times if it is not already enabled. Confirm your password immediately, and then go to the steps below to configure your default USB settings.
- Navigate to the SettingsSystemDeveloper options on your phone after it has been unlocked. Then scroll down to the bottom and search for Default USB setup, which you should hit
- SelectFile Transferor from the drop-down menu. When your Android smartphone is unlocked, it will automatically connect to your computer as a media device.
Restart your phone as well as your PC. In the event that your Android phone is still not visible on your computer after attempting the first method, it is necessary to restart both the phone and the computer. It’s possible that software issues are causing the connection to be interrupted. As a result, before proceeding, restart both devices and then attempt to connect to the computer again after that. To restart your Android phone, long-press the power button and then click or swipe on the word Restart.
- Verify that the USB cord is in good working order.
- In case you didn’t know, certain wires are specifically designed for charging purposes alone.
- Insert the cable into another USB port on the computer to double-check that it is working properly.
- USB Debugging should be enabled on your phone.
- While USB debugging is typically used by developers to speak with their Android phones, run instructions, and do other tasks, many consumers have claimed that they were able to connect their computers after enabling USB debugging.
- Additionally, you’d need Developer settings enabled in order to accomplish this.
- Open the Settings app on your smartphone and select Now > Developer Options from the drop-down menu
- Locate USB debugging by scrolling down the page. Allow it to be enabled and then reconnect to the computer to test whether it works
- Put the computer to sleep and then bring it back to life
Another approach to try if your Android phone isn’t being detected by your PC is to put your computer to sleep for a time and then start it back up again. You are most likely unaware that this may resolve the problem. To put your computer to sleep with its default configurations, just press the Powerbutton on your computer. In addition, you can log off of your computer before putting it to sleep. To bring the computer back to life after a few minutes of inactivity, press the power button as usual.
Make sure your Android phone’s driver is up to date.
As a result, you may need to reinstall or update the driver for your phone first.
- Connect your phone to your computer using a USB cord that is compatible with your phone. Select Device Manager from the list by pressing the Windows key + X on your computer’s keyboard. Expand thePortable Device right there on the spot. Now, choose Update Driver Software from the context menu of your phone by right-clicking it. After that, choose Browse my computer for driver software from the drop-down menu. Just below the pop-up window, choose Allow me to choose from a list of device drivers on my computer from the drop-down menu. Locate and selectMTP USB Device from the list that appears, then touch
After that, the computer should be able to recognize your device. If it doesn’t work, try one of the other options listed below. Try using a different computer. If you have tried all of the solutions listed above and they have not worked for you, it is time to try another computer. That is the most expedient method of determining if the problem is caused by your phone or your computer. Simply connect your phone to a second computer and select File Transfer mode from the menu. If it works, it indicates that your machine is malfunctioning.
Visit the official customer service center.
Visit the official help center for your phone, as well as the support center for your PC.
Carlcare is the authorized service provider for these brands, and we can assist you in resolving a wide range of issues related to your phone.
Similarly, if you suspect that the problem is originating from your computer, you should take it to a specialist or an established help center. You may find more information about centers in your area by visiting their website.
How to Get Your Android Device to Show up in File Explorer (If It Isn’t)
Your Android phone may be used for a variety of tasks, like listening to music and watching films, as well as taking images, but in order to get those files onto–or off of–your device, you may need to connect it to your desktop PC. When everything is working well, it is wonderful; but, if your device is not identified, it may be really aggravating. The majority of the time, when you connect your Android smartphone to your computer, Windows will automatically detect it as an MTP (Media Transfer Protocol) device and silently mount it.
It’s true that you can accomplish this from your phone or tablet, but utilizing a classic desktop computer can convert what could be a lengthy and tiresome job into a quick and pleasant one.
In contrast, if you’ve ever attempted to unlock your device, for example, to install a fresh ROM or root it, it’s likely that you’ve installed the Android Debug Bridge (ADB) driver on your computer at some point.
Start with the Obvious: Restart and Try Another USB Port
Consider going over the standard troubleshooting procedures first, before doing anything else. Replace the battery in your Android phone and give it another shot. Also, try using a different USB cable or a different USB port on your computer. Instead of using a USB hub, you may directly connect it to your computer. You never know when you could be dealing with faulty hardware, and no amount of software troubleshooting will be able to remedy the situation. So start with the most obvious things.
Is Your Phone Connected As Storage?
A problem with how your Android device is connected to your computer may be the cause of your Android device not displaying in File Explorer as it should be. Unless you explicitly specify otherwise, your phone will only connect in charging mode when you wish it to be linked as a storage device. Connect the device to your computer by plugging it in and selecting the “USB” option from the notification shade. In this case, the message can be something like “USB charging this device,” or “USB file transmission.” The language may differ somewhat based on the Android build and manufacturer of your smartphone, but it will always refer to USB in some way.
A typical menu will include options such as “Charge this device,” “Transfer photos,” and “Transfer files,” among others.
Update Your MTP Driver
If the suggestions above do not assist, it is probable that you have a driver problem. If you access the “Printers and Devices” control panel, you will be able to validate that your computer is actually “seeing” an MTP device but that it is not recognizing it. If your device is listed under “Unspecified,” this indicates that your PC requires user involvement. Alternatively, it may appear under a generic name–in our test instance, the Nexus 6P appears as an unidentified MTP device, although it is, in fact, a Nexus 6P.
- To do this, we need to modify or upgrade the Windows driver that is currently in use whenever you connect your Android smartphone to the computer through USB.
- The Device Manager will appear.
- It may be found under the heading “ACER Device” in the screenshot below.
- If you don’t find anything with the letters “ADB” in the name, you may have to seek somewhere else for it.
- Regardless of where you discover the device, the activities that must be performed should be same.
- You wish to select the browse option, which will take you to the next stage in the procedure.
- If you choose “Android Device” or “Android Phone,” you will be presented with a broad range of possible hardware options.
- In this case, the device driver will replace the existing one, and your Android device will be recognized as a multimedia device, which may be viewed in the File Manager right away.
Now, anytime you open File Explorer, your Android device should be visible, and you should be able to access it, navigate through its file system, and add or delete items as you see fit.
Your question: How do I get Windows 10 to recognize my Samsung phone?
Verify the USB Connection Preferences In the event that your Android smartphone is not set up as a media device (MTP), your computer will not detect it. If you have a device with an Android operating system, you may alter this setting by going to the device’s “Settings” and selecting “Developer options,” scrolling down to “USB configuration,” and tapping on it.
Why does my computer not recognize my Android phone?
If your computer is not detecting your phone at all, this might suggest a problem with your network connection. It may be necessary to insert the USB cable into a different USB port on your computer, or into a new computer altogether. It is possible that this problem is caused by obsolete or missing drivers, in addition to a malfunctioning USB port.
Why my phone is not connecting to PC through USB?
To begin, ensure that the device is configured to be linked as a media device by following these steps: Connect the gadget to the computer by using the proper USB cord. … Check to see if the USB connection displays the message ‘Connected as media device.’ If it does not, touch on the message and select ‘Media device’ from the drop-down menu (MTP).
To make phone calls, you’ll need to link your computer with your phone via Bluetooth. When you go to the “Calls” tab on your computer, you’ll be requested to complete this task. To connect to your Galaxy smartphone, just hit the “Connect” button on your computer’s keyboard. Make sure your phone’s Bluetooth is switched on so that it can be seen by your computer’s Bluetooth.
The Your Phone app in Windows 10 connects your phone and computer. It is most effective for Android users, allowing you to communicate from your PC, sync your alerts, and wirelessly move photographs back and forth between the two devices. In addition, screen mirroring is on the way.
Why doesn’t my PC recognize my Samsung phone?
If your computer is unable to recognize your Samsung phone, there may be a physical problem with the phone itself. Check to see that your phone is turned on and the screen is not locked. If the phone does not vibrate or make a sound when the USB cable is plugged in, it is possible that there is an issue with the USB port (where you plug the cable into the phone).
How do I turn on MTP mode?
In order to connect through USB, you must first pick the USB mode.
- To access the Recent Apps Key from the Home screen, press and hold the Recent Apps Key (in the Touch Keys bar) MenuIconSettingsStoragethe Settings icon (at the upper-right corner of the screen) Connection to a computer by USB
- To connect to the computer, select Media sync (MTP), Internet connection (PTP), or Camera (PTP).
Can I connect my Android phone to my PC?
Connecting an Android device to a computer Connect the micro-USB end of the cable to your phone, and the USB end to your computer, using USBFirst to get started. As soon as you connect your Android device to your PC via a USB cable, a USB connection notice will appear in the Android notifications area of the device. Transfer files may be done by tapping the notice and then tapping Transfer files.
How do I enable MTP on my Android?
- Select ‘Apps’ from the drop-down menu. ‘Power Tools’ is an abbreviation for “power tools.” ‘EZ Config’ and ‘Generator’ are two terms that come to mind. Open the DeviceConfig.xml configuration file. ‘DeviceConfig’ and ‘Other Settings’ are examples of configuration options. Select the appropriate option from the drop-down menu under ‘Set USB Mode.’ PTP – Photo Transfer Protocol MTP – Media Transfer Protocol (File transfers) MTP – Media Transfer Protocol (File transfers) Select ‘Update Configuration’ from the drop-down menu. Save
- Restart the computer or device.
7th of November, 2018
Why is USB tethering not working?
APN settings: Android users who are experiencing tethering issues with Windows can occasionally resolve the issue by altering their APN settings. Scroll down and choose APN Type, then type “default,dun” into the text box and press OK. If it doesn’t work, some people have claimed success by altering the word to “dun” instead.
Why USB is not detected?
The USB driver that is presently loaded has become unstable or corrupted. Your computer requires an update to resolve difficulties that may arise while using a USB external hard drive in conjunction with Windows.
It’s possible that Windows is missing additional critical updates due to hardware or software difficulties. It’s possible that your USB controllers have become unreliable or corrupt.
How do I enable USB preferences?
Navigate to the SettingsAbout menu on the device. To make SettingsDeveloper options available, tap the Build number seven times in succession. Then choose the USB Debugging option from the drop-down menu. Tip: You may also wish to select the Stay awake option on your Android smartphone to keep it from napping while it is connected to a USB connection.
Where is USB settings on Android?
The quickest and most straightforward method of locating the setting is to enter settings and then search for USB (Figure A). Android is looking for a USB port in its settings. Scroll down and choose Default USB Configuration from the drop-down menu (Figure B).
4 Methods to Fix Android Phone Not Recognized but Charging
When you are trying to transfer files between your Android phone and your PC or recover data from your Android phone, it might be quite upsetting to discover that your Android device is not recognized as a USB driver. While the end outcome is the same in every case, the reasons and remedies may differ from one to the next. If you have many devices with the same symptoms or alerts, you may see them on all of them. For example, you may see “USB device not recognized,” “PC does not identify Android phone,” and “USB device not detected but charging.” Please review the options listed below to resolve the Android USB device not recognized on Windows issue.
First, try the following measures: Here are some simple suggestions that may be of assistance and will not take much time even if they are unsuccessful.
- Replace the USB cord and use a different computer to see if the problem persists. Some wires are designed just for electricity. Connect your Android device to your PC directly, rather than using a USB hub. Reboot the phone and connect it to the computer while it is in Airplane mode. Remove the battery and SIM card and wait a few minutes before replacing them and rebooting
- If Windows recognizes your phone but cannot locate any material on it, you should unlock your phone’s screen and try again
- Otherwise, contact Microsoft.
If none of the preceding tactics work for you, please try the remedies listed below.
Solution 1. Connect Android to Computer as MTP to Fix Charging Only Problem
Android devices may be linked in a variety of ways, such as a media device (MTP), a camera (PTP), a USB flash drive, or just for charging. If you wish to transfer data between your phone and your computer, you must use the MTP mode on your USB connection. Whenever an Android device is connected to a computer, a notification with the title “Connected as a.” or “USB Charge Only” should display on the drop-down menu. You may press it to bring up the USB computer connection choices, from which you can select MTP from the drop-down menu.
Try the methods listed below.
- Navigate to the SettingsStorageMore menu (three dots menu) Choose Media device (MTP) while connecting to a computer through USB. For Android 6.0, go to SettingsAbout phone (Software info), and then press “Build number” 7-10 times to confirm the change. Returning to the SettingsDeveloper settings, choose MTP from the drop-down menu under “Select USB Configuration.” However, there is no way to make MTP the default on Marshmallow. Dial * 0808, and if you see the message “USB Settings,” choose MTP+ADB and then reboot.
Solution 2. Update or Install Proper Driver for Android USB Driver Not Working Problem
Occasionally, Windows will not identify an Android device due to a corrupted driver or because the USB driver is not functioning properly. As a result, you must update or install the appropriate driver for your device. The following are two commonly used techniques. (See more information on how to install Android USB driver.)
Update Driver for Android Phone Manually
- Procedure: Step 1: Launch Control Panel
- Step 2: Select “System and Security,” then “System”
- Step 3: Select “Device Manager” from the left-hand list
- Procedure: Then locate and expand “Other devices” or “Portable devices” until you discover the driver you’re looking for. It is recommended that if there is an issue with the driver, it is indicated with a yellow exclamation mark. Step 5. Right-click on the driver and select “Update Driver Software.” from the context menu. Step 6. Select successively “Browse my computer for driver software” and “Let me pick a list of device drivers on my computer” before selecting “MTP USB Device” and pressing Next once again. Connect your device once again when the driver has been updated.
Install Proper Driver via Manufacturer Tools
Drivers for manufacturers’ devices are typically accompanied with management tools for the manufacturers’ devices.
It is possible to install official administration software on your computer, such as Samsung Kies or Smart Switch, as well as HTC Sync Manager. Then, connect your phone to your computer and run the software to have drivers installed immediately on your phone.
Solution 3. Install Necessary Kit for Windows 10 to Fix Android Not Detected Problem
It is possible that you will face an Android USB not recognized problem after upgrading to Windows 10. You will need to install certain missing files in order for Windows 10 to recognize your Android phone as an MTP device. The following two suggestions may be of assistance. Media Transfer Protocol Porting KitMedia Feature Pack Media Transfer Protocol Porting Kit Notice: For further information on Windows 10 does not recognize Android, please see the following link: Windows 10 does not recognize Android.
Solution 4. Try a Trick to Fix Android Not Recognized Problem Caused by Hardware
If none of the alternatives listed above are successful in resolving your Android device’s connection issues, it is possible that the problem is due to a hardware malfunction, in which case you should try this trick. This is not your typical tech tip, yet many individuals have reported that it is effective. Please understand that you are doing so at your own risk.
- Take your phone and look at the micro USB connector on the side of it. Place something small and nonmetallic into the USB port and carefully raise up the thin contact points
- This is the second step. In Step 3, reconnect the USB cord between your phone and computer.
Some users have reported success with the techniques provided above in resolving the Android not recognized issue. One article cannot, however, address or resolve all of the circumstances or problems that may arise. You can either continue your search for alternative solutions or return your gadget to the manufacturer for assistance. If your problem has been resolved, please do not hesitate to share your experience with us in the comments section below so that additional people might benefit from it or have the courage to continue trying.
Top Solutions to Fix Windows 10 Not Detecting Android Phone
Windows 10, which is a personal computer operating system developed and published by Microsoft on July 29, 2015, is a member of the Windows NT family of operating systems. Since the release of Windows 10, everyone has shown an interest in upgrading their system. Windows 10 is a popular operating system due to its wide range of functions and visually appealing user interface, however you may encounter small problems while upgrading from Windows 7 or Windows 8 to Windows 10. One of the most prevalent problems is that Windows 10 does not detect your Android phone, even when it is connected to your computer through USB.
Although some PCs now include Bluetooth technology, bulk files can only be transmitted easily when a device is connected to your PC through a connection.
Listed below are some of the most effective techniques for resolving the problem of Windows 10 not recognising an Android phone:
Solution 1: Restart Android Phone/Windows 10 Computer
Windows 10 is a personal computer operating system developed and published by Microsoft on July 29, 2015, as a member of the Windows NT family of operating systems. Since the release of Windows 10, everyone has been seeking to update their PC. Even though Windows 10 is a popular operating system because to its wide range of features and visually appealing user interface (UI), you may experience small troubles while updating your device from Windows 7 or 8. A typical problem is that Windows 10 does not detect your Android phone, even when it is connected to your computer.
Even though several PCs nowadays have Bluetooth capabilities, bulk files can only be transmitted easily when a device is connected to your PC via a wire.
You can simply repair this problem, though, with some practical remedies that will take you absolutely no time at all, which is excellent news. If your Windows 10 computer is not recognizing your Android phone, we’ve compiled a list of the best options for you:
Solution 2: Use a different USB cable
Windows 10 is a personal computer operating system developed and launched by Microsoft on July 29, 2015, as part of the Windows NT family of operating systems. Since the release of Windows 10, everyone has shown an interest in upgrading their systems. Windows 10 is a popular operating system due to its wide range of functions and visually appealing user interface, however you may encounter small troubles while upgrading from Windows 7 or Windows 8 to Windows 10. One of the most prevalent problems is that Windows 10 does not detect an Android phone, even when it is connected to a computer through USB.
While some PCs now include Bluetooth technology, bulk files can only be transmitted easily when a device is connected to your PC through a connection.
Listed below are some of the most effective techniques for resolving the problem of Windows 10 not recognizing an Android phone:
Solution 3: Check USB Computer Connection Settings
- Connecting your Android phone as a media device (MTP) to your computer is required in order to handle Android files on your PC. Using your Android device, navigate to “Settings” – “Storage” -click the icon “More” -select “USB computer connection” -select “Media device(MTP)” -select “Save” -save the file. -reconnect your Android device to your PC
- It is possible that you will have to switch between the various connection choices multiple times before your Android phone is recognized by the computer.
Solution 4: Enable USB debugging
According to the prior experience of many Android users, enabling USB debugging can occasionally alleviate the problem in question. On Android versions 4.2 to 8.0, the following is how you may accomplish your goal:
- Select “About phone” from your Android’s “Settings” menu and tap “Build number” seven times. Select “Developer settings” and switch on USB debugging. When a warning message displays, select “OK.” Check to see whether your Android has been identified.
Solution 5: Install the Correct USB Drivers
The computer will automatically install the relevant USB driver for your Android phone when you connect it to a Windows computer, allowing the phone to function correctly on the computer. However, your computer may occasionally be unable to accomplish this. As a result, you must manually download and install the appropriate USB driver in order to resolve the problem of the computer not recognizing the Android phone.
Solution 6: Turn on Airplane mode
Some consumers reported that they had tried turning on Airplane mode on their Android devices and that their devices were correctly identified by their computers, allowing them to transfer files without difficulty. So that you may experiment with this approach and simply switch off Airplane mode after the file transmission is complete.
Solution 7: Reinstall Android Drivers
It is possible that you do not have the most recent drivers installed, which will result in a recognition problem; thus, it is recommended that you reload your Android drivers.
Uninstall current Android drivers:
- Connect your Android device to your computer
- Open Device Manager
- Identify your Android device
- Right click the device and select Uninstall
- Then unplug your phone.
Reinstall Android drivers:
- Replace the connection between your Android and the computer
- Wait for Windows 10 to reinstall its drivers
- Then check to see whether your phone is identified by the computer.
Solution 8: Update MTP USB Device Driver
Replace the connection between your Android and the computer; wait for Windows 10 to reinstall its drivers; then check to see whether your phone is recognized by the computer.
Solution 9: Install Media Feature Pack
You must connect your phone and computer in MTP mode, which is connected to Windows Media Player, if you wish to transfer Android files to a computer running Windows 10 operating system. While the Media Feature Pack is not included in the N or KN editions of Windows 10, you may download it from Microsoft’s official website if you have a computer running the N or KN editions of Windows 10.
Solution 10: Reboot Phone into Odin Mode
This approach is only applicable to Samsung mobile phones because Odin Mode, also known as Download mode, is only available on Samsung phones.
This solution is only applicable to Samsung mobile phones. To enter Odin mode, do the following steps:
- Step 1. To switch off your Samsung, press and hold the Power and Home keys together for a few seconds. 2nd step: Press and hold theVolume Down, Power, and Homebuttons simultaneously until the Download mode screen displays. Using the Volume Up button, choose Download mode, and then connect the phone to a computer
- Step 3 Step 4: The computer should now automatically install the Android drivers that are compatible with your device. 5th step: Reboot your Samsung phone and see whether it is recognized as normal by your PC.
1st step: To switch off your Samsung, press and hold the Power and Home keys together for a few seconds. Step 2: Press and hold the Volume Down, Power, and Homebuttons simultaneously until the Download mode screen displays on the screen. Step 3: Press the Volume Up button to enter Download mode, and then connect the phone to the computer. Using Step 4, your computer should now automatically download and install the appropriate drivers for your Android device. 5th step: Restart your Samsung phone and see if it is recognized as usual by your PC.
Solution 11: Install a PC suite
The majority of Android phone manufacturers have created their own PC suites that allow you to connect your Android phone to your computer. All you have to do is download and install the appropriate PC suite on your machine, after which you may connect your phone. Although this may not always remedy the connectivity difficulties, many customers have reported that the computer not recognizing the phone problem has been resolved after installing the appropriate PC suite. Users of Samsung mobile phones, for example, may download the KIES software, which the company has designed specifically for connecting their phones to all sorts of PCs, from the company’s website.
Solution 12: Use a Third Party App
When their computer fails to identify their phone, many users resort to installing a third-party application on their PC. These programs are intertwined with a variety of capabilities that aid in the synchronization of your phone with your computer, and it does work in some situations. You should check using a software called Syncios, which is a free program that allows you to connect your phone to a PC. We urge that you try it out. Furthermore, it is compatible with both Android and iPhone devices, so you do not have to be concerned about the brand or model of the phone you are using.
You can find them by searching for “mobile to PC” on the Internet.
Solution 13: Delete Unwanted Files from Your Phone
Your device’s external and phone memory may get completely filled at times. This also makes it difficult for it to communicate with a computer since there isn’t enough RAM left to send a connection request and process it. Because of this, you may erase the files that you no longer desire from your phone. Deleting cache and memory from media storage files can also be beneficial in these situations because part of the storage space is immediately freed up. You may clear the cache and data from your phone by following these steps:
- In your phone’s settings menu, select the “Apps” option. Step 1: Go to the “Settings” menu and select the “Apps” option. By touching on the right-most corner of the phone, you may access the ‘System Apps’ section. Step 3: Select ‘External Storage and Media Storage App’ from the drop-down menu and erase the cache and data
- Step 4: After you have cleared the cache and data from your device, restart it. Fifth, connect your device to your computer and verify that it is being recognized by your computer
Solution 14: Reinstall Android Composite ADB Interface
If Windows 10 is unable to identify an Android phone, it is possible that there are problems with the Android composite ADB interface. Consequently, you may download and reinstall the ADB program to see if it works for you or not before making a decision. To restore the composite ADB interface, follow the procedures below:
- Step 1: Go to your computer’s ‘Device Manager’ and click on ‘Add/Remove Devices.’ Step 2: Locate the ‘Android Composite ADB Interface’ and uninstall it by selecting it from the menu bar and selecting Uninstall. Then, restart your computer and reconnect your phone to complete the process. You can tell whether the computer detects your Android phone since it signifies that it has appropriately reset the driver settings automatically. If, on the other hand, your PC does not identify your phone, you may need to do a few further steps. Step 4: Look for a USB Driver and download it as soon as you locate it. Step 5: Unzip the driver and save it in a specified location. Keep track of the location of the folder from where you downloaded the data in case you need it later. To complete Step 6, re-open the ‘Device Manager’ program. Now, select ‘Scan for hardware/software changes’ from the drop-down menu. Step 7: Look for Composite ADB Interface on the computer. Then, when you’ve located it, right-click on it and choose “Update Driver Software” from the context menu. Step 8: After that, select ‘Browse for driver software’ from the drop-down menu and navigate to the directory where the drivers were extracted previously. Select the ‘Include Sub Folders’ option from the drop-down menu. Then click on the ‘Next’ button. 9. Press the ‘Windows + X’ keys together and choose ‘Command Prompt (Administrator)’ from the menu list. Step 10: When the program begins, type these sentences into the text box. Don’t forget to press the ‘Enter’ key after each phrase. Devices controlled by the adb kill-serveradb start-serveradb command
This solution is compatible with the vast majority of Android devices running Android 5.0 or above.
Some individuals have also reported that only completing the first three steps is sufficient to resolve the problem, and that there is no need to download the USB Driver again.
These are a few solutions that you may try if your Windows 10 PC is having trouble recognizing your Android phone. There are a variety of reasons why a computer may fail to identify a phone, and as a result, the solution may change depending on the user. You can recommend these ways to your friends who are experiencing the same problem, or you can just forward this link to them. Additionally, you can inform us if you are aware of a methodology that is not covered by any of the ways listed above.