- 1 The Samsung remote is not working
- 2 9 Tips on solving Samsung TV is not responding to remote issue
- 3 Reasons why your Samsung TV is not responding to the remote
- 4 Solutions to Samsung TV not responding to remote
- 5 What happens if the power button is the only one that’s working?
- 6 Final Thoughts
- 7 Samsung TV remote is not working? How to fix
- 8 Ways to fix a Samsung TV that is not responding to the remote
- 9 How to fix a Samsung TV remote sensor that is not working
- 10 Troubleshooting a Samsung Smart TV remote touchpad
- 11 How to fix a Samsung remote that is not pairing
- 12 What if your remote is blinking red light?
- 13 Conclusion
- 14 TV Not Responding To Remote Control – How To Reset A TV Remote Control?
- 15 Fix A TV Not Responding To Remote
- 16 Get Remote To Work With TV
- 17 Samsung TV Remote Troubleshooting
- 18 Samsung TV Remote Not Working (Red Light Is Blinking)
- 19 Samsung TV Remote Not Working (No Red Light Blinking)
- 20 Samsung Remote Volume Not Working
- 21 Samsung TV Not Responding To Remote
- 22 Samsung TV Says Not Available When Using Remote
- 23 Samsung TV Buttons Not Working
- 24 Samsung Smart TV Remote Not Working? [Troubleshooting]
- 25 How a Samsung TV Remote Works
- 26 Common Culprits
- 27 Perform a Hard Reset of the Remote
- 28 Replace the Batteries
- 29 Check Your Connections
- 30 Check for Updates
- 31 When All Else Fails
- 32 10 Best Ways To Fix Samsung Smart TV Remote Not Working Issue – THE CONCH TECH
- 33 Best ways to fix Samsung Smart TV Remote Issues
- 33.1 1. Check your Network
- 33.2 2. Install the remote control app
- 33.3 3. Get a new WiFi module
- 33.4 4. Clean the IR sensor/remote
- 33.5 5. Change flat batteries
- 33.6 6. Check remote is paired
- 33.7 7. Check Your TV’s Software Updates
- 33.8 8. Check for Interference
- 33.9 9. Reset the TV
- 33.10 10. Get a universal remote
- 34 What to do if Only the Power Button Works on the Samsung Remote
- 35 What to do if Samsung TV is Unresponsive to Remote
- 36 How to Reset Samsung Smart TV Remote
- 37 How to Pair Samsung Smart TV Remote
- 38 Conclusions
- 39 Samsung TV Remote Not Working How To Fix
- 40 Samsung Smart TV remote not working possible problems
- 41 First check of the remoteSamsung
- 42 The remote can only turn the TV on or off
- 43 Remote control does not work and red indicator light is blinkingFixed
- 44 Some buttons on the remote control do not workFixed
- 45 The TV turns on and off by itself fixed
- 46 Remote Control Problems Fixed
- 47 The TV sometimes stops responding to the remote control fixed
- 48 Fix Other Problems with Samsung TV Remote
- 49 How To Reset Samsung Remote
- 50 Pair Samsung remote
- 51 How To Pair Samsung Remote
- 52 Pairing Remote to Samsung TV (2016-2021)
- 53 Connecting Remote toSamsungTV (2015)
- 54 Pairing Remote to Samsung TV (H-Series, 2014)
- 55 Pairing Remote to Samsung TV (E and F series, 2012-2013)
- 56 How Do I Reset my Samsung Smart Remote?
- 57 How To Repair Old Remote Control
The Samsung remote is not working
A Samsung representative from Best Buy will contact you to arrange a time for you to try out the Galaxy S10.
At Best Buy, a Samsung salesperson may arrange for a personal presentation of your next galaxy device.
Troubleshooting your remote is dependent on the problem you’re having.
If it doesn’t work when you attempt to use it on your TV, there’s a fast test you can do to see if the problem is with your remote or your TV.
With the Shop Samsung App, you can check out quickly and easily.
Alternatively, you may continue buying on Samsung.com.
You Are About To Be Redirected To Investor Relations Information for U.S.
Thank you for visiting Samsung Investor Relations in the United States. You will be forwarded to the Samsung Global website for U.S. investor relations information in a new browser window.
9 Tips on solving Samsung TV is not responding to remote issue
Thank you for taking the time to visit Samsung’s Investor Relations website in the United States. The Samsung Global website for U.S. investor relations information will be delivered to you in a new browser window.
Reasons why your Samsung TV is not responding to the remote
- Remote batteries that aren’t linked properly
- Low batteries
- A bad internet connection
- Faulty buttons
- Your Samsung TV remote sensor is being blocked by an item
- There’s an issue with the television
Replace the batteries before attempting more difficult problem solutions. If the problem persists, use one of the ways listed below to resolve it.
Solutions to Samsung TV not responding to remote
Resetting your television might sometimes solve the problem. You may utilize the manual buttons largely underneath your TV screen to reset it. Disconnect the power cord that is attached to the television. To prevent causing extra issues, remember to unplug slowly. Wait at least five minutes after unplugging before reconnecting the power cable. Try turning on the TV using the remote once the power cord is connected to the wall outlet. Use the manual power button to turn the TV on if it won’t turn on using the remote.
By removing all of the batteries, you can quickly reset the remote. To remove the batteries, follow these steps:
- If your batteries are dead or there is a technical problem, your remote may stop working. By removing all batteries, you may quickly reset the remote. To take the batteries out, follow these instructions.
If the problem has been resolved, great; if not, try alternative troubleshooting options. Although the remote is already paired when you buy a Samsung television, it’s not a bad idea to connect it again. If neither the remote nor the television appears to be the issue, check to see if both devices are properly linked. To see if the two devices are still connected, do the following:
- For a few seconds, hold down the playandreturnbuttons
- Wait until your TV and remote start to sync
- Try pushing remote buttons once the synchronizing procedure is finished. Check to see whether the television is working
For a few seconds, hold down the playandreturnbuttons. Wait until the remote and your TV start to sync. Try pushing the remote buttons once the synchronizing procedure is completed. Check to see whether the TV is working; Because of the Wi-Fi module, your Samsung TV may not react to the remote. The IR sensor is connected to the majority of Wi-Fi modules. The IR sensor may fail to respond if there is no consistent connection. Wi-Fi modules are readily accessible locally, and they cost around ten dollars.
Follow these procedures if you don’t know how to factory reset it:
- Because of the Wi-Fi module, your Samsung TV may not react to remote commands. The IR sensor is used by most Wi-Fi modules. The IR sensor may fail to respond if the connection isn’t steady. Locally available Wi-Fi modules cost around $10. After installing a new Wi-Fi module, the TV must be factory reset. Follow these instructions if you’re not sure how to factory reset it:
Before you reset your TV, make sure you’ve backed up all of your important files to the cloud or Gmail. Note: Before resetting your TV, make sure you’ve backed up all of your important files to the cloud or to Gmail.
- Remove the power cord from your Wi-Fi router
- Unplug your modem or router from the TV after that. Wait about two minutes before plugging them back in.
After then, switch on the television and see whether the remote is working. Installing a remote control app will undoubtedly assist in the software repair of the television. If your Samsung TV’s remote is entirely broken, it’s not a bad idea to download a remote control app. To set up the app, follow these steps:
- Look for an Android TV control app in your phone’s app store. Ascertain that your Smart TV is linked to the same network as your phone
- After the app has been downloaded, go to your home screen and press it to launch it. You’ll be asked to enter the model number of the television you’re using
- You’ll be given a PIN. To pair them, enter the PIN presented on your TV screen.
You may now control your TV with your phone after installing a remote control app. If you’ve exhausted all of the above troubleshooting options, try this procedure. If there is dust or debris caught in the IR sensor, it may fail to respond. Clean the IR sensor if you’ve done everything else and your Samsung TV still won’t react to the remote. To clean it, follow these steps:
- If there is dust or debris in the IR sensor, it might sometimes fail to respond. Clean the IR sensor if you’ve done everything else and your Samsung TV is still not responding to the remote. Cleaning it is as follows:
It’s possible that the issue isn’t with your remote, but with your Samsung TV. It’s possible that the TV is having software issues and consequently isn’t operating properly. Check to see whether you need to upgrade your TV if you feel it’s the source of the problem. To see whether there are any updates, go to:
- Turn on the television and select themenu option
- You’ll discover aSupportoption under theAll Settings section. Choose the Software Update icon. Locate the Networkicon and choose Yes to do an upgrade.
If the troubleshooting techniques provided do not solve the problem, you might try getting a new remote control. When picking one, go for the universal option to prevent compatibility issues. A remote can be purchased at a local electronics store or ordered online.
If you just have access to the power button, it’s possible that the TV and remote aren’t paired. To get all of the controls to operate, you’ll have to fix the devices again. To re-pair, follow these steps:
- Disconnect the power cord from the main outlet and turn off the television. Connect the power cord after roughly a minute. Press the PlayandBackbuttons at the same time for around 15 seconds once the TV is turned on. When the TV and remote are paired, a message will appear on the screen. Check to see whether all other buttons are working when the pairing procedure is completed.
If several buttons on a remote are jammed, it may not operate properly. To fix the issue, follow these steps:
- Remove the batteries from the remote and push each button numerous times. By pressing all of the buttons, you can confirm that they are all operating properly and are not stuck. Now try pressing the buttons in the direction of your television to see if they’re still stuck.
If you try all of the troubleshooting techniques listed above and your TV still doesn’t respond, your TV hardware may be damaged. You can borrow your friend’s remotes to see whether they function before you rule out the problem. If their remotes work, it’s possible that yours is the issue. If, on the other hand, your television is not responding, you should see a professional.
Denis is a freelance article/blog and content writer with over three years of experience covering a variety of topics such as product reviews, buyer’s guides, health, travel, fitness, technology, and tourism. I also have sufficient SEO writing skills.
Samsung TV remote is not working? How to fix
The easiest method to fix a broken Samsung TV remote is to figure out what’s causing the issue in the first place. You could notice, for example, that a button does not respond when you press it. It’s also possible that the remote won’t link with the TV or that the sensor isn’t working. It will be difficult to diagnose or solve the problem until you know what is causing it. There are just four possible causes for a Samsung TV remote to cease operating properly. Bad batteries, a technical issue with the gadget, a malfunctioning remote, and a faulty sensor on the TV are all examples.
Replace the batteries first.
Ways to fix a Samsung TV that is not responding to the remote
Follow these troubleshooting steps if your Samsung TV won’t react to the remote:
1. Restart your TV
Restarting your television will reset the system and allow you to begin again.
- Turn off the television
- Remove it from the power supply
- Allow 30 seconds to pass
- Reconnect the TV to the power outlet
See what happens if you use the remote to turn it on.
2. Perform a digital camera test
A digital camera test might assist you figure out if the remote’s infrared is working.
- Activate the camera on your phone
- Aim the remote at the camera’s lens
- Using the remote, press a button
- To signify that the remote is operating, the remote’s infrared eye should glow on the camera screen.
If the remote works, the problem is with the TV’s remote sensor. However, if it does not operate, the remote is faulty. Replace it if necessary.
How to fix a Samsung TV remote sensor that is not working
Check for any obstruction between the remote and the sensor on your TV to troubleshoot the remote sensor. If an item is between the two, the infrared signal will be blocked. You’ll need to restart your television and try again. Follow the above-mentioned instructions. If the sensor still doesn’t function after you’ve followed these methods, return the TV to the vendor if it’s still under warranty. If not, look for a reputable technician who is familiar with Samsung televisions.
Troubleshooting a Samsung Smart TV remote touchpad
Check for any obstruction between your remote and the sensor on your television to troubleshoot the remote sensor. The infrared transmission will be blocked if an item is between the two. You’ll also have to reset your television and give it another shot. Take the actions mentioned in the preceding paragraphs. If the sensor still doesn’t function after you’ve followed these procedures, return the TV to the vendor for a refund if it’s still under warranty. If this is not the case, seek out a reputable Samsung TV specialist.
- For three seconds, press and hold the NUMBER key
- The calibration procedure will commence. The remote’s LED will blink twice once it has been calibrated.
Avoid touching the touchpad during the calibration procedure. If the problem continues to occur, you may need to calibrate the touchpad from time to time. However, if the remote stops working altogether, it’s preferable to replace it with a reliable replacement that’s compatible with your TV. You may also use the Omaic global remote to control all Samsung TVs. Amazon.com/Amazon.com/Amazon.com/Amazon.com
How to fix a Samsung remote that is not pairing
Keep your fingers off the touchpad throughout the calibrating procedure. If the problem persists, you may need to periodically calibrate the touchpad. If the remote stops working fully, it’s preferable to replace it with a decent replacement that’s compatible with your TV. Alternatively, all Samsung TVs may be controlled using theOmaic universal remote. Amazon.com image
- Remove the batteries. If at all feasible, use new ones
- Hold the power button for at least 20 seconds while the batteries are out. Remove the power cord
- Replace the batteries. To re-link, hold down the Play/Pause and Back keys at the same time.
When you’re finished,
- Press and hold the Return and Play/Pause buttons for at least three seconds while pointing the remote to the TV’s sensor.
The remote will begin to connect with your Samsung TV.
A notification will appear confirming that the remote has been linked to your television.
When your Samsung TV remote stops working and starts blinking red, there are a few things you may do to fix it:
- If your Samsung TV remote stops working and begins blinking red, there are a few things you may do to fix it:
If none of the previous methods work, try resetting the remote. Remove the batteries from the container and hold down the Power button for eight seconds. Replace the batteries and try to use the remote again.
When your Samsung TV remote stops working, there are a few things you may do to troubleshoot or solve the problem. Replace the batteries, wipe the remote’s upper edges, and inspect the terminals first. If you’re having trouble with the red light blinking, you might try pairing the remote again. You may also fix a touchpad that isn’t working by calibrating it from time to time. You might also be interested in:
- How to Reset the Samsung Smart Hub
- On a Samsung TV, HDMI isn’t working
- How to turn on the service mode on a Samsung Smart TV
- How to install programs from a USB drive on a Samsung Smart TV
TV Not Responding To Remote Control – How To Reset A TV Remote Control?
The remote control does not function with the television! My television will not respond or change channels when I use the remote control. How can I troubleshoot the TV remote sensor or reset the remote control? I have a Samsung Smart TV, and the remote has never failed to operate it in the past year. I’m not using a universal remote; I’m using the original remote that came with my TV. Is it possible to fix this problem by resetting the TV or the remote control? What Is The Best Way To Reset A TV Remote Control?
Make sure the remote is pointed at the television.
Fix A TV Not Responding To Remote
1.Install fresh high-quality batteries in the remote control (AAA or AA batteries). 2.Unplug the TV power cord from the wall socket to reset it. 3.Return the TV power cord to the wall outlet after 5 minutes. 4.Verify that the remote is now compatible with the television. If it doesn’t work, try the suggestions below. Replace the batteries in your TV remote control.
Reset The TV Remote Control
Certain TV remote controls might get “locked” and stop responding to your commands. Resetting TV remote controllers is as simple as removing the batteries. To do a reset, remove both batteries from your TV remote control. This is an excellent opportunity to replace the batteries in the remote to ensure that it has enough power. After you’ve changed the batteries, try pointing it towards the TV and hitting the power button. Is the television on? If this is the case, the TV remote will no longer work.
Reset The Television
Turn off the television. Pull the power plug from the TV’s electrical wall socket gently. This turns the TV off and clears any faults that may have caused the remote to malfunction. Reconnect the TV power cord to the wall socket after 5 minutes. Check to see if you can use the TV remote control to turn the TV back on. The problem is solved if the television turns on.
If the TV does not turn back on with the TV remote, hit the little power button on the TV itself. Test the volume buttons on the TV remote once again. Is there a change in the TV volume? If not, continue reading. If this problem has only recently arisen,
Get Remote To Work With TV
1.Make sure the area where you’ll be using the remote to control the TV is clear of any things that might interfere with or obstruct the beam. 2.Check to see whether the remote control is sending out a signal. Examine the emitter on the front of the remote control using your phone’s camera. If you notice a red light, press a button on the remote. The red light indicates that the remote control is operational. If there is no red light, the remote is either dead or malfunctioning and has to be replaced.
Samsung TV Remote Troubleshooting
DISCLAIMER:This post may include affiliate links, which means that if you click on the links and buy something, we get a commission at no extra cost to you. Samsung is recognized for making high-quality televisions all around the world. As a result, their television accessories are typically trustworthy, albeit they do have their share of faults. We’ll look at how to troubleshoot your Samsung TV’s remote control in this article. It’s possible that your Samsung TV remote could stop working, or that the TV will stop responding to key strokes.
It’s also possible that only one feature on the remote, such as the volume controls, fails.
Why does this happen? Let’s say you attempt to utilize your Samsung TV remote but it isn’t working. It not only prevents you from changing stations or altering the level, but it also disables all of the functionality. However, every time you press a button on the remote, the red light blinks. If this is the case, there are two plausible explanations:
- If the red light blinks when you use the remote, it signifies the gadget is receiving power from the batteries and delivering a signal. The first cause for nothing happening is that there is an impediment in front of the TV’s receiver.
Make sure there are no obstructions in front of your TV, such as gadgets, boxes, or other items.
- Samsung TV remotes must be linked with the television before they can operate properly. The remote is most likely no longer connected with the television. As a result, despite the fact that it has power (thus the red light) and broadcasts a signal, the TV’s receiver will not identify it
What to do about it: Clear any impediments in front of your TV’s receiver to repair this. This includes other gadgets, boxes, and anything else that interferes with the remote’s signal. A clear line of sight between the remote and the receiver is required. After that, pair and sync the remote with the television once more. The following are the measures to take:
- Hold down the Backbutton and the Upbutton at the same time. Hold those buttons down for 10 to 20 seconds, or until you hear or see a prompt
- The TV will pair with the remote and sync with it
Please keep in mind that the exact procedures will vary depending on the Samsung TV model and remote. So, if the procedure above doesn’t work, consult your user handbook. For your model, you may need to press and hold two separate buttons. See also:How to Reset a Ceiling Fan Remote
Why does this happen? We looked at a Samsung TV remote that wasn’t working despite the red light blinking in the previous part. What if the identical problem occurs, but the red light does not blink completely?
The most likely explanation is that the remote does not have any power. This indicates that the batteries are most likely dead and must be recharged (if rechargeable) or replaced. Before you do that, here’s one more troubleshooting activity to double-check:
- To begin, open the camera app on your smartphone. Then, with the camera pointed at the remote’s front tip, press several of the buttons
- Normally, the infrared light from the remote would be visible. If the light isn’t turning on, it’s a further indication that the batteries are dead.
When the batteries are fully dead, the only way to remedy it is to replace them with fresh ones. Just make sure the connections on the battery match up with the ones on the remote to verify that they operate properly.
Samsung Remote Volume Not Working
Why does this happen? If your Samsung TV remote works properly except for the volume controls, one of two things might be the case:
- Outdated Firmware: Built-in software, often known as’firmware,’ controls the performance of smart devices like your Samsung TV. It can also be affected by software flaws (or’bugs’) that prevent it from functioning properly. The problem created by the malfunction in this situation is that the TV does not respond when you try to change the volume using the remote. Problems with Soundbars: If you’re using a Samsung Soundbar as your TV’s main speaker, the problem might be that your remote isn’t programmed to control the soundbar’s volume. Unfortunately, for some TV models, linking your remote to both the TV and the soundbar at the same time isn’t automated and must be done manually.
What to do about it: Regardless of whatever issue is creating this issue, keeping your TV’s firmware up to date is always a good idea. As a result, make it your first move in resolving this problem. Follow these procedures to upgrade the firmware on your Samsung TV:
- To begin, go to theSettingsmenu on your television
- Select Support and then Software Update. Select Update Now and then follow the on-screen instructions. It will take a few minutes for the update to complete
- EnableAuto Updateon the same menu to make things easier in the future. Your TV will then automatically download new upgrades when they become available in the future.
After that, program your TV remote to operate your soundbar and adjust the volume. You may also accomplish this by activating theUniversal Remoteoption in theSettingsmenu. This allows you to manage the soundbar straight from your TV remote and change the volume as needed.
Samsung TV Not Responding To Remote
Why does this happen? First, go through all of the troubleshooting procedures listed above if your Samsung TV is not responding to the remote. Check that the battery is charged and that the remote’s infrared signal is being transmitted from the front tip. Also, make sure nothing is in the way of the TV’s signal reception. The remote is not linked with the TV if your Samsung TV does not reply despite everything else operating properly. That is to say, the TV does not recognize the remote and will not respond.
- To begin, press and hold the Backbutton and Upbutton at the same time. Then, for 10-20 seconds, hold those buttons down until you hear or see a prompt
- The TV will pair with the remote and sync with it
As previously said, these instructions may vary somewhat depending on the type of your Samsung TV. You could be needed to press and hold a separate set of buttons, for example. Please see your user manual for further information.
Samsung TV Says Not Available When Using Remote
Why does this happen? If your Samsung TV keeps displaying an error message indicating that a feature isn’t accessible, it’s likely due to an internal hardware problem. In this scenario, the first step in troubleshooting would be to reset the TV to see if it would function again. Follow these steps to do so:
- To begin, disconnect the television from its power source and set it aside for one hour. Press and hold the power button on the TV unit (not the remote) for 60 seconds while the TV is still disconnected. Plug the TV back into a wall socket while you’re pushing that button. Then, for another 60 seconds, hold the power button on the TV device.
If the reset procedure doesn’t work and the error message persists, it’s a clue that there’s an issue on the inside. For example, there might be a malfunctioning control board or excessive wear and tear on the components. What to do about it: Regrettably, this issue need expert intervention. Repairs will be suggested by a skilled technician. If the TV has been in use for a long time and is no longer repairable, you’ll probably be better off buying in a newer, more modern Samsung TV.
Samsung TV Buttons Not Working
Why does this happen? Samsung TVs feature built-in control buttons. These buttons are designed to provide you control if your TV remote malfunctions. Depending on the model, you’ll locate them under the TV or in the rear. If you push these buttons and they don’t function, the problem isn’t with your remote control. Instead, the TV is experiencing an internal problem that prevents it from recognizing any button pushes. For example, there might be an internal problem produced by an excessive residual electric charge or a software glitch.
What to do about it: There are two options for dealing with this problem. The first is to discharge any leftover electric charge and conduct a cold boot, while the second is to restore factory settings to the television. Follow these steps to execute a discharge:
- Press and hold the Power button on the remote while the TV is turned on until it goes off and on again. Remember to keep the Power button pressed during the procedure.
You can also switch off the TV and detach it from the electrical socket for 30 seconds. After that, reconnect it to the power source. Also see: What Is Sanitize And How Does It Work On Samsung Dryers?
Samsung Smart TV Remote Not Working? [Troubleshooting]
Nothing is more aggravating than a television remote that suddenly stops working. You’re speeding through your menu and selecting the stuff you want to watch one minute. You can’t even switch off your TV from across the room the following minute. Despite the fact that each TV and remote is slightly different, several troubleshooting methods are universally applicable to all models and manufacturers. If you follow those troubleshooting procedures, you should be able to figure out why your Samsung smart TV remote isn’t working.
There are a few additional possibilities as to why your Samsung smart TV remote isn’t working.
How a Samsung TV Remote Works
A Samsung TV remote connects to the television via connecting with it. If you’ve ever used a Fitbit, you’re familiar with how device pairing works. Signals are transferred between the two devices via Bluetooth technology, which is found in your smartphone and Fitbit tracker. During the pairing process, the devices will often transmit each other an identifying code to “match” or “pair” the connection. After the devices can “see” each other across Bluetooth, this happens. To communicate, the two devices must be within range of each other once they have been paired.
At least not until the set is once again within range.
Infrared light is used by other TV remotes to communicate.
You’ll be hitting buttons on the remote that don’t work if it’s not in this line of sight.
When your Samsung TV remote stops working, you’ll naturally want to figure out what’s wrong so you can fix it. Issues with the batteries, Bluetooth and infrared communications, a programming difficulty, malfunctioning sensors, or a defective remote are the most prevalent causes. If you can switch your TV on and off with your remote but none of the other features work, try the following:
- Disconnect the power cable from the TV and turn it off. Wait 30 seconds before reconnecting the TV’s power cord
- With the TV set, repair the remote
The remote can become detached from the TV through Bluetooth at times, and you’ll need to re-establish the connection.
A quick reset and repair generally solves the problem. After you’ve gone through the reset and repair procedures, test all of the remote’s commands to determine whether they function. If the Samsung smart TV remote isn’t working for whatever reason, there are a few more things to look into.
Perform a Hard Reset of the Remote
A hard reset of the remote is the next step to take. To begin, remove the batteries from your remote control. After then, disconnect the TV’s power cord and wait 60 seconds. Reconnect the power cord to the outlet and turn the television back on. You’ll have to use the TV’s own on/off switch. Replace the batteries in your remote after the TV has been turned back on all the way. Then attempt to use all of the remote’s features. Hopefully, this resolves the issue. If not, the next step is to rule out the batteries as a possible source of the problem.
Replace the Batteries
Many folks just remove the existing batteries from the remote to test if the remote’s batteries are the issue. They then insert a fresh set into the remote and begin pressing various buttons. You’ve uncovered your root cause if the remote begins operating or becomes more responsive. You’ll want to be cautious about which batteries you replace. If you’ve had spares in your house for a long time, they may have lost their power. Rechargeable batteries should also be checked to ensure that they are fully charged.
Otherwise, you risk missing the root of the problem.
Check Your Connections
Your Samsung smart TV remote may stop operating due to a connection issue. You might begin by looking at your internet connection. Because a smart TV requires a functioning internet connection, if that connection is down or damaged, your remote will not react to all requests.
- Turn off the television. It is not necessary to unplug it from the power source, although it is a good idea to do so. Disconnect the power supply from your modem. Disconnect the coaxial line from the wall connector and the modem itself if you have a cable modem. Allow 15 to 20 seconds to pass
- Reconnect the coaxial wire to the wall jack and the modem, if necessary. On both ends, make sure the cable is snug and secure. It’s also possible that you’ll need to try a new coaxial cable or remove and replace any splitters. Reconnect the modem’s power supply
- Wait until the modem comes back to life and says it’s connected
- Restart your television and wait for it to reconnect to your internet connection. Attempt to use the remote’s functionalities once again
If the internet connection between the modem and your TV appears to be operating properly, try cleaning the sensors. Your TV, as well as the remote, should have a sensor. To clear dust from the sensors, use a delicate cloth or blow air on them. Try the remote again after cleaning the sensors. Although the remote is meant to pair with the TV automatically after a power reset, you can try to mend the two while the TV is turned on. Hold down the return and play/pause buttons on your remote to begin the procedure.
Try using your remote when the sync procedure is finished.
Instead, try some of the menu commands.
Check for Updates
If none of the methods above work, the TV’s software may be out of date. The settings may be accessed from the main menu. You should see a software update option. If this option is available, pick “network.” If your TV detects that an update is available, accept it and choose yes to install it. Your TV should reboot automatically once you’ve installed any outstanding upgrades. Try running through all of the commands on your remote after it’s turned back on.
When All Else Fails
If none of your troubleshooting alternatives seem to be working, you should look into your warranty and repair options.
It’s possible that your TV’s sensor is malfunctioning, or that the remote is malfunctioning. Check to see if Samsung will ship a replacement or if your location has an approved repair shop.
10 Best Ways To Fix Samsung Smart TV Remote Not Working Issue – THE CONCH TECH
Samsung has a reputation for producing high-quality televisions, and its Smart TVs have helped to cement that reputation by bringing tremendous functionality and convenience at your fingertips, all rolled into the display itself with no other devices required. The simplest approach to fix your Samsung smart TV remote is to reset it:
- Remove your remote’s batteries
- Remove the television from the wall
- 60 seconds have passed
- Reconnect the TV
- Wait for it to turn back on
- Replace the batteries in the remote and test it
Few individuals can disagree that this type of functionality is appealing, but it is only useful when it works. When your remote stops operating, those beneficial functionalities become obsolete. Fortunately, there are a number of options to consider before tossing your remote into the garbage. Continue reading to learn how to fix a Samsung Smart TV remote that isn’t working. Now is the time to check out the most dependable Samsung remote control on Amazon!
Best ways to fix Samsung Smart TV Remote Issues
There are a variety of reasons why your Samsung Smart TV remote can stop functioning, ranging from the apparent to the less obvious. Below, we’ve compiled a list of some of the most prevalent reasons of this issue. To begin, here is a Samsungsmart remote control handbook that will provide you complete instructions on how to use your remote.
1. Check your Network
This is a smart place to start because your Smart TV or remote will never operate properly if you don’t have a decent Internet connection. Plus, it never hurts to plug stuff in and out, so let’s give it a shot.
- Unplug your modem, router, and television
- Wait one minute
- Replug them in
2. Install the remote control app
This step will not cure the problem on its own, but if you can control the TV from your smartphone without any issues, you may go on to the TV software issue.
3. Get a new WiFi module
It’s usually found with the power button and an IR sensor, and it’s the source of the problem. When the WIFI module fails, the TV appears to be trapped in a state of waiting for the network to reply. They are inexpensive, costing less than ten dollars, and can assist you in pairing your remote with your Samsung TV. Replace it with the new WiFi module and factory reset the TV after putting everything back together.
4. Clean the IR sensor/remote
This method is completely free and simple to apply. Simply blow on the sensor’s terminals and the connection that connects to the board; they may become dusty and stop receiving the signal. You can do the same thing with your remote’s sensor to ensure it’s clean and ready to use.
5. Change flat batteries
We did state that some of them were obvious, and flatbatteries are among the most obvious. The first thing to check if your remote isn’t working is whether the batteries are dead. The simplest approach to accomplish this is to replace the batteries in your remote with a known-good pair.
6. Check remote is paired
We understand; the remote was previously paired; why shouldn’t it be paired now? Things like these may, unfortunately, happen in the realm of technology. Whether you’re not sure why your remote isn’t functioning and the batteries aren’t the problem, check to see if it’s still linked to the TV. For roughly 5 seconds, press and hold the Return and Play/Pause buttons. The SmartRemote will begin synchronizing with your TV.
7. Check Your TV’s Software Updates
It takes two to dance, so it’s possible that the problem isn’t with your remote, but with your television.
Because an issue with the TV’s software is possible, we should rule it out by seeing whether there is anything that needs to be done. The procedure may vary from one television to the next, but below is a broad outline.
- Go to All Settings/Support, then Software Update, then Network. If this step isn’t accessible, skip it. To install the update, select Yes / OK.
8. Check for Interference
If you have a Samsung Smart TV, your remote should function over Bluetooth, but if you have an infrared remote, ensure sure there are no obstacles between it and the TV receiver when you use it.
9. Reset the TV
Problems can arise from time to time with any sufficiently intricate program, especially if it has been in use for an extended length of time without being reset. Because the software that controls your Smart TV’s “smart” features is also prone to this type of issue, it’s worth giving it a hard reset before thinking your remote or TV is broken. Simply turn the TV off and disconnect it for a minute or two to do this. When attempting to figure out what’s causing a problem, this is typically a good place to start.
- Hold the power button on your remote control for around 5 seconds until the TV turns back on
- If the problem persists, disconnect the TV completely from the wall. Then push and release the power button on the television
- Wait 2 minutes before plugging the TV’s power cord back in.
10. Get a universal remote
Even if it sounds strange, an original TV remote can sometimes be the source of all the drama. Try purchasing a new remote, ideally a universal one, which will likely be of assistance and will cost roughly $10. Now is the time to check out the most dependable Samsung remote control on Amazon! The best technique to fix your Samsung Smart TV remote will, of course, depend on the issue that is causing it to malfunction. If your batteries run out, you should be able to fix the problem by replacing them; however, you may need to re-pair your remote.
Another option to try if your Samsung Smart TV is having troubles is disconnecting it and leaving it for a minute or two.
What to do if Only the Power Button Works on the Samsung Remote
It’s generally an indication that the remote has gotten unpaired from the TV if just the power button works. You’ll have to couple it again in this scenario. The precise technique varies from TV to TV, but here’s what it usually entails:
- Turn the TV off
- Disconnect it from the power supply for 15 seconds
- Reconnect the power and turn it back on
- For roughly 10 seconds, press and hold the “Back” and “Play/Pause” buttons on the remote
- If it succeeds, the TV should display a message indicating that it is pairing with the remote.
One of the buttons on the remote may be jammed, causing this problem. That’s how you’ll be able to solve it:
- Remove the batteries from your remote control
- To drain any extra battery, press and hold the power button for roughly 30 seconds. If you press each button in and out a few times, you should be able to remove a stuck button
What to do if Samsung TV is Unresponsive to Remote
If none of the preceding alternatives have worked and your TV is fully unresponsive to the remote, it is likely that there is a hardware issue. It’s conceivable that the problem is with your television, but it’s more probable that it’s with the remote. Consider borrowing a friend’s or family member’s Samsung Smart TV remote to be sure yours isn’t broken before spending money on a replacement.
How to Reset Samsung Smart TV Remote
Resetting your Smart TV remote might sometimes help you fix problems. It’s crucial to remember that resetting your remote entails more than simply removing the batteries; certain information saved in your remote is persistent, which means it will remain after the batteries have been removed. Resetting your remote is the same procedure as before: hold down the “Back” and “Play/Pause” buttons until your television displays a message indicating that it is pairing.
Before doing this, you may wish to disconnect your TV for a brief period of time, as a hard reboot should guarantee that no temporary software issues impede with the operation.
How to Pair Samsung Smart TV Remote
The pairing/reset procedure for a Samsung Smart TV remote is the same, so press and hold the “Back” and “Play/Pause” buttons until your TV detects the remote and displays the pairing message. After that, you should be able to link your TV with the new remote.
Samsung’s smart TV remotes provide a plethora of convenience, so it’s understandable that when they break down. While hardware failures are not unheard of, errors like these are frequently the result of a simple remedy that does not necessitate the purchase of a new remote or an expert visit. Just remember to take your time and look over all of the options, since if you ignore one potential flaw, it will almost certainly be that flaw that causes the problem. Hello there, technophiles! My name is James, and I’m an administrator as well as a regular contributor to this blog.
Samsung TV Remote Not Working How To Fix
Samsung’s smart TV remotes provide a plethora of convenience, so it’s understandable if they stop working. While hardware failures are not unheard of, errors like these are frequently the result of a simple remedy that does not necessitate the purchase of a new remote or a specialist’s visit. Just remember to take your time and look into all of the options, since if you pass over one potential flaw, it will almost certainly be that flaw that is the source of the problem. Good day, techies! My name is James, and I’m a regular contributor to this blog as an administrator and writer.
Samsung Smart TV remote not working possible problems
Today’s televisions are full-fledged computers with specific programs in charge of the functioning of particular TV components. Problems with the remote control might appear in a variety of ways. The following are the most typical issues with the Smart remote control.
- The TV can only be turned on or off with the remote
- The remote control isn’t working, and the red indication light is flashing
- Some of the remote control’s buttons aren’t working
- The television turns on and off on its own
- The television will occasionally stop responding to the remote control
The Samsung Smart Remote: Everything You Need to Know A Bluetooth transceiver is included into this remote control. The remote and the television must be matched in order for them to function correctly. The remote and the TV function together after they’ve been linked. Let’s look at why the remote might not be working and how to fix it.
First check of the remoteSamsung
The Smart remote is powered by batteries, and as of 2021, premium TV models will have solar-powered remotes. These remotes contain rechargeable batteries that can be charged through USB or by the built-in solar panel. The batteries in Smart remotes without solar panels are changed with fresh ones; with Solar Cell remotes, the remote is charged from any USB connection (TV or laptop). Charge the remote control or replace the batteries if the battery level is insufficient to function correctly.
The remote can only turn the TV on or off
Because the on/off button uses an infrared signal, you must point the remote towards the TV and push the on button to activate it. The smart remote begins operating through the Bluetooth connection once the TV is turned on, thus it will not operate if there are any issues with the Bluetooth connection.
However, connection issues aren’t the only reason your Samsung remote isn’t working. The following are some of the most common causes of problems: Bluetooth issues I’ve already discussed issues with the remote’s batteries. Error with the software. Bluetooth in the remote or on the TV is broken.
The remote control only turns the TV on and off Fixed
There are just a few viable options if your remote control merely turns the TV on and off.
- Despite being linked, the remote control and the television are not in sync. The remote control isn’t working
- The bluetooth module in the television is broken
To figure out what’s wrong, follow the steps below.
- Unplug the television for three to four minutes to totally de-energize the television’s electrical components. The TV will load the operating system from memory after turning on, and the cache files will be removed. Break apart the remote-TV connection and re-sync the remote and TV (I’ll show you how later)
- Toss out the Smart Remote
This problem usually happens when the remote control and the television are unable to transfer information in sync. Follow the steps below to remedy the issue.
- Check to see whether there is a wireless gadget in front of the TV, such as a WiFi soundbar. The Bluetooth signal may be muted if the bar is quite close to the TV. Unplug and restart the television
- Press and hold the power button for 20 seconds while the TV is turned on. Press and hold the power button for 20 seconds when the TV is turned off to empty the cache memory. (This is dependent on the television model.) Reconnect the remote control to the television
A malfunction of the buttons on the remote control is a rather uncommon occurrence. The contact pads under the remote control buttons must be disassembled and cleaned.
The TV turns on and off by itself fixed
Make sure Anynet+ (HDMI-CEC) is turned on. This is a feature that allows you to operate multiple HDMI-connected devices at once, such as a Roku or a player. These gadgets have the ability to switch on the television. Remove the batteries from the remote and check to see if the TV will switch on on its own. If the problem persists, try resetting the television. If the TV continues to switch on by itself, it is likely that it is broken.
Remote Control Problems Fixed
The most typical issue is when you can use the remote to switch on and off your TV but the other buttons aren’t working. Typically, this indicates a problem with your remote control’s Bluetooth connection; there might be a simple loss of connection with the TV or software issues as well. If the on/off buttons on your remote are still responsive, you’ll need to restart your TV. To do so, you’ll need to:
- Wait 30 seconds after disconnecting the TV from the power supply. Alternatively, you might wait until the TV indication goes off. Connect the power supply to the television
- Pair the remote control with the television
The TV sometimes stops responding to the remote control fixed
If the TV stops responding to the remote control on occasion. Insufficient battery power might be the problem. You’re a long distance from the television. The distance between the remote control and the television should not exceed 30 feet (10 meters). The real distance may be significantly shorter due to the energy field created by other electrical gadgets in the house.
Fix Other Problems with Samsung TV Remote
First, make sure the remote control’s batteries are in good working order and replace them with fresh ones. The remote control will not function correctly if the batteries are dead. The remote control usually does not cease working immediately, but you may find that you have to hit the button 2-3 times before it reacts. The distance problem is also an obvious symptom of battery problems: the lower the battery level, the closer you must approach the remote to the TV for it to operate.
How To Reset Samsung Remote
You might try resetting your Samsung TV remote to see if it helps solve the problem. Given that the remote control is such a basic technology, the chances of you making a mistake are incredibly remote, thus you may reset it from home. Remove the batteries and wait 3 minutes to reset the remote, or press and hold the power button for 5-10 seconds to reset the remote. The capacitors in the remote take a long time to deplete. This is only applicable to the universal remote. Even if the smart remote is turned off, it retains the Bluetooth pairing.
The remote control does not need to be reset to the TV.
Pair Samsung remote
Because the smart remote is a Bluetooth device, you must first pair it with your TV before using it. This allows the TV to recognize the remote. It is not difficult to couple a remote control because it is basically the same as pairing any other device.
There are, however, some steps to take in order to pair properly. When the signal intensity is strong, pairing happens. As a result, while pairing the remote control with the TV, the remote control must be close to the TV and the remote control’s batteries must be fully charged.
How To Pair Samsung Remote
If you have a new remote control that hasn’t been associated with the TV before, you’ll need to do so. It is usually linked automatically, but if it isn’t, you must connect it manually. By pushing the two RETURN and PLAY/STOP buttons on the remote control, you may link it with the TV as of 2016. It’s important to have the remote control as close to the TV as possible. If the pairing is successful, a message will appear on the TV screen indicating that the remote control is now connected to the television.
Check to see if the remote control and the television are compatible.
Pairing Remote to Samsung TV (2016-2021)
Models from the years 2016 to 2021 include the T, R, N, M, Q, LS, K series, as well as all QLED, LIFESTYLE, and LED TVs. More information about Samsung TV model numbers may be found in this post. After determining your Samsung TV model number, point the remote towards the TV and simultaneously push RETURNandPLAY/STOP on the remote for about 5 seconds, but no less than 3 seconds.
Connecting Remote toSamsungTV (2015)
The previous-generation remote controllers operate with J-series Smart TVs. To link the remote with your TV, concurrently press RETURN/EXIT and EXTRA for at least 3 seconds.
Pairing Remote to Samsung TV (H-Series, 2014)
The H-Series varies from other versions in that it must be paired for at least 3 seconds by pressing RETURN and GUIDE.
Pairing Remote to Samsung TV (E and F series, 2012-2013)
To pair the remote control with a Samsung TV from the 2012-2013 model years (series F and E), point it towards the TV and hit the PAIRING button. It may be found on the remote control’s backside. By pushing the RETURNandGUIDEbuttons at the same time, you may connect the remote with your TV. Samsung first introduced Smart TVs with smart remotes in 2012, therefore all previous models lack this feature. When connecting the remote control with a Samsung TV, there are often unanticipated complications, especially with older TV models.
Then turn on the television and pair the remote.
It might be a problem with the batteries or a programming error.
How Do I Reset my Samsung Smart Remote?
‘How can I reset my Samsung remote?’ is a question that some people have. There’s a simple solution: just like any other Bluetooth device, you don’t need to reset Samsung Smart Remote; simply link it again if necessary. Attention! It is not necessary to re-paint the remote control if there are any issues with it. First, make sure the remote control’s batteries are in good working order and replace them if necessary.
How To Replace Batteries in Samsung TV Smart Remote Control
To change the batteries, remove the battery cover, remove the old batteries, and replace them with the new ones.
Also, pay attention to the polarity of the batteries; normally, information on how to install the batteries may be found within the battery compartment. The + and – symbols represent polarities.
How To Repair Old Remote Control
All smart remotes are explained above, including the buttons to press to pair them with your TV. Because all remotes created before 2012 aren’t smart, they frequently stop operating due to low batteries. All you have to do now is replace them. If it doesn’t work, your remote is probably broken, and you’ll need to get a new one. The image below depicts the various types of smart remote controls as well as the buttons that must be held down in order to link your remote control with your television.