Which Hdmi Port Is Arc On Samsung Tv


How to use HDMI ARC on Samsung Smart TV

The most recent update was made on July 7, 2021. Audio and video signals are sent over HDMI, which is a standard connection. This standard is used by sound devices and projectors alike. In order to provide a better audio experience, an HDMI cable may be used to transfer the sound from your Smart TV to a sound device. The ARC (Audio Return Channel) is a particular feature of HDMI high-speed certified cables that allows sound to be routed back to the transmitter in addition to being received. The HDMI function known as Audio Return Channel is supported by the vast majority of Samsung televisions.

The audio signal has the capability of going both to and from the speakers, which will increase the sound quality and latency of the signal in both directions.

In order to connect your TV to an ARC-capable speaker, you must use an HDMI cable with a version number of 1.4 or above.

It is possible that you may need to make adjustments to the settings of the external speakers in order to enable HDMI ARC controls.

How to connect an HDMI cable

To connect your Smart TV to your speaker, follow the procedures outlined below: Step 1: Connect an HDMI wire to your computer. Step 2: Connect the wire to the HDMI IN port on the television (ARC). To connect the speaker, connect the HDMI OUT (TV-ARC) connector of the speaker to the TV-ARC port of the TV. Step 4.Connect the speakers that are linked to the television to the television. Step 5.The sound from the television will be broadcast through your external speakers. For the Samsung Soundbar and Home Cinema System, Anynet Plus (HDMI CEC) is pre-activated during the manufacturing process.

  • For smart TVs from the T/Q, R/Q, N/Q, and M/Q series (as of 2017)

HomeSettingsGeneralExternal device managementExternal device management Anynet + is a network of computers that connect to the internet (HDMI CEC) SystemExpert configurations may be found in the following locations: HomeSettingsSystemExpert configurations Anynet + is a network of computers that connect to the internet (HDMI-CEC) Nota bene: SystemAnynet + (HDMI-CEC)Nota bene:

  • The Anynet + (HDMI-CEC) function on the smart TV must be activated in order to use eARC. An error may occur if an unapproved cable is used
  • For example, It will be branded ARC on the back of the TV or One Connect Box when it has an HDMI connector. The majority of One Connect Boxes are equipped with an HDMI-ARC connector (which is generally the third HDMI port).

Troubleshooting the HDMI connection

Remove any external devices (STBs, streaming devices, etc.) that are linked to the TV and then attempt playing again if there is an issue with the ARC/eARC function. Some external devices may not adequately conform with the HDMI connection requirements, which may result in issues when connected to an HDMI source. If you are still experiencing difficulties, you should investigate the following options. Check to see if Anynet+ (HDMI-CEC) is on. To learn more, please visit our website. You will need to enable the HDMI-CEC protocols in the TV’s Settings Menu in order for them to work properly.

  1. In order to enable Anynet+, you will need to navigate through the menu system as follows: Step 1.
  2. Step 2.On the Settings screen, select the General Menu and the External Device Manager from the drop-down menu.
  3. Check the Sound Output setting on your computer.
  4. If you are utilizing a third-party soundbar or home theater system, make sure that the HDMI CEC or the ARC capability is enabled on the device.

Then, on your speaker, change the input source to HDMI ARC (as shown). The following settings need be made on your Smart TV, depending on the series, in order for the sound to be reproduced by your speaker system:

  • Smart televisions from 2017 (series T / Q, R / Q, N / Q, and M / Q)

Open the HomeSettingsSoundSound Output menu option. Choose Receiver (HDMI) from the drop-down menu. Open the HomeSettingsSoundSpeaker Settings menu option on your browser. Choose Receiver (HDMI) from the drop-down menu. Open the SoundSpeaker List in the MenuSoundSpeaker List. Choose Receiver (HDMI) from the drop-down menu. Open the MenuSoundSpeaker Preferences. Set the sound output of the television to the receiver. Activate the MenuSystemAnynet + option (HDMI-CEC). Turn on the Receiver feature by pressing the button.

To learn more, please visit our website.

Because it is not always possible or feasible to replace the connection with a higher-quality cable, Samsung Smart TV models have an option that may be used to modify how the TV interprets the HDMI signal and therefore enhance compatibility with the cable.

  • Basic:This is the default setting for regular functioning
  • It is the most basic setting.
  • This adds a little amount of time before deciding that the HDMI cable is not transmitting a signal.

Setting this option to Slow 1 or Slow 2 can enhance the signal quality from a bad HDMI connection; but, as a side effect, this delay will also occur when changing the source, so be careful while changing sources. How to Reset the Soundbar on your Computer To learn more, please visit our website. After connecting the HDMI ARC cable to the Soundbar and making sure all of the settings are right, but still experiencing problems, you may be able to restore functionality by following the procedures outlined below.

(Standby mode is activated.) Step 2.Press and hold the Volume Up (+) and Volume Down (-) buttons on the remote for more than 5 seconds until the INIT screen appears.

Step 4.Using the TV remote, press the Home button once.

After the TV ARC notice shows on the front display, the TV sound is played.

Thank you for your feedback!

Please respond to all of the questions.

Contact Info

WhatsApp is available 24 hours a day, seven days a week for technical help or enquiry, service center location, repair progress, demo installation request, and more.

Live Chat (English / हिंदी*)

The service is available 24 hours a day, seven days a week*.

Sign Language

An translator for sign language was present throughout the video conference, which was helped by a Samsung product specialist. Hours of operation: Monday through Friday, 11:00 a.m. to 6:00 p.m.

Email Support

We’ll get back to you within 24 hours of receiving your inquiry.

Email Support Bangladesh

Upon receiving your request, we’ll react within 24 hours.

Email Support Sri Lanka

We will react to your request within 24 hours of receiving it.

24 Hours Phone Support (India)

1-800-5-726-7864(1-800-5-SAMSUNG) 1-800-40-726-7864(1-800-40-SAMSUNG)

Face-to-Face Support

Whether your product is still under warranty or has expired, we are here to assist you.

Remote Service

Our fully experienced specialists will do remote diagnostics on your Galaxy mobile and Samsung TV through the internet.

CEO Office

Office of the CEO

Phone Support (Bangladesh, Sri Lanka, Nepal)

Make a Notation () Greetings, valued customer We are pleased to announce that Samsung Web chat assistance is now accessible in the Hindi language as well as English. , If you have any questions, please feel free to contact me at [email protected] or [phone number protected]. * If you have any questions, please contact us at [email protected]. Chat with us ( ):Click here to start a conversation.

Do Samsung TVs Have HDMI Arcs? (And How to Use Them)

When you use your Samsung TV to play video games, watch programs, or listen to music, you might soon accumulate a maze of tangled connections. In order to remedy this issue, engineers developed something known as a “HDMI Arc.” As the name implies, this basically feeds media straight to your TV, eliminating the need to fiddle with AUX wires and other cables. Do Samsung televisions, on the other hand, have this feature? HDMI Arcs are seen on a large number of Samsung televisions. Using this method, all audio and video from an output device is sent to your television.

Learn more about how to use your HDMI Arc and what it implies for your smart home experience by continuing reading this article.

Do Samsung TVs Have HDMI Arcs?

Most televisions (including Samsung televisions) are equipped with HDMI Arcs that are pre-installed. However, if you’re trying to improve the sound quality of your system, you might invest in anHDMI Arconline. If you have an older television or sound system, you may want to consider purchasing an external HDMI Arc.

How Do I Know if My TV Has an HDMI Arc?

If you’re not sure whether your television has an HDMI Arc built in, look at the input and output ports on the back of the television. They should be situated on the bottom or the rear of the device, preferably both. It should mention HDMI (High Definition Multimedia Interface) beneath the HDMI port (ARC). This is by far the most reliable method of checking whether your television is equipped with this function. If, on the other hand, you don’t feel like looking via your TV’s HDMI ports, you may perform the following:

  • Check the instructions in your user handbook. The manual that came with your television should mention all of its input ports, including whether or not it has HDMI Arc capability. You may change your input options by scrolling through them. When you open the input menu on your Samsung TV, you may notice that it says HDMI (Arc) when you make your option.

How to Connect HDMI Arc on Samsung TV

For the HDMI Arc to work properly, you’ll need three items: a Samsung TV, an HDMI cable, and a speaker. The HDMI Arc port on your Samsung TV should have already been fitted when it was purchased. Before you begin, double-check that your television and speaker are both connected to a power source. From here, you may do the following:

  1. Find the HDMI IN port on the back of your television. Connect the HDMI cable to this port by plugging it into either end. Locate the HDMI OUT on your speaker and press it to activate it. Connect the HDMI cable to this port.

When you switch on your television, the sound should begin to play automatically through your speaker system.

Troubleshooting Setting Up Your Samsung TV’s HDMI Arc

If you are experiencing any difficulties when utilizing HDMI Arc on your Samsung TV, examine how the following alternatives might be able to help you:

Use a Different HDMI Cord

According to CNET, HDMI version 2.1 is the most recent available. Consequently, if you purchase an HDMI cable from a major merchant, it will most likely operate at that speed. A more recent HDMI cable (1.3 or less in length) will, however, not be compatible with your Samsung HDMI Arc monitor and will not function. Better off switching to a newer, more up to date version.

Make Sure You Have Anynet+ (HDMI-CEC) Enabled

This function enables your HDMI cord to “communicate” with your television. To make this setting active, follow these steps:

  1. Press the home button on your Samsung remote control to return to the home screen. Obtain access to the television’s settings
  2. Select “General Menu,” then “External Device Manager” from the drop-down menu. Select Anynet+ (HDMI-CEC) from the drop-down menu. To turn it on, press the “Enter” key on the remote control.

Turn on Your TV’s Receiver

If your television is more than four years old, this option is likely to function well for you. To switch on the receiver on your television, do the following:

  1. Press the “Home” button on your remote control
  2. Select “Settings.”
  3. Select “Sound.”
  4. Select “Speaker Settings.”
  5. Select “Receiver (HDMI)” from the drop-down list
You might be interested:  What Phone Is Better Iphone Or Samsung

Reset Your Speaker

If this is the first time you’ve used your speaker with an HDMI Arc, you might want to try resetting it before turning on your television. The procedure for resetting your speaker is different depending on the device you have. If you have a Samsung Soundbar, for example, you may reset it by following the instructions outlined below:

  1. Turn off your television and soundbar. Press and hold the “+” and “-” buttons for a total of five seconds. Turn on your television and soundbar. Click on the “home” button on your remote control
  2. “Settings” will be shown. You may now direct the sound output to your soundbar

Unplug the Cables, Then Plug Them Back In

Turn off your television and soundbar; remove your headphones. Press and hold the “+” and “-” buttons for five seconds to begin the game. Set your television and soundbar to the appropriate settings; Using your remote, press the home button. “Settings.” will be shown. You may direct the sound output to your soundbar.

How Are HDMI Arcs Used on Samsung TVs?

The objective of HDMI Arcs is to minimize the number of wires in your entertainment system while also streamlining it. “Channels” are a term used to describe the structure of audio. The greater the number of audio channels supported by a speaker, the more colorful and rich the sound. According to Samsung, HDMI Arcs TVs are compatible with the following audio formats:

  • PCM is an abbreviation for Personal Computer Memory (two-channel). This is for digital audio tracks with a two-channel output. Dolby Digital is a digital audio format that is often used with CDs and DVDs (up to 5.1 channels). A DTS Digital Surround sound system, which offers five channels of sound, which is widely heard in feature films (up to 5.1 channels). This is a typical occurrence with Samsung televisions manufactured prior to 2018. Also similar to Dolby Digital in that it generates five layers of sound, but it offers less compressed sound
  • It is also comparable to Dolby Digital in that it produces five levels of sound.

The best option for you is heavily influenced by the type of speaker you’re using.

Final Thoughts

The majority of Samsung televisions on the market now are equipped with HDMI arcs. Connecting your speaker to your TV with an HDMI connection is all that is required to use this functionality. If this doesn’t work, think about how the troubleshooting approaches listed above can be of use to you.


What is the best way to utilize ARC with my Samsung TV? With Samsung televisions, you have the option of having the TV audio output directly via the television or through an AV receiver that is attached to the television. The CEC feature may be accessed via the Tools button on the switched-on Samsung TV. Select Receiver – if the HDMI control of the receiver is active, the device name should also be shown if both components are linked via the ARC. When you turn on the “Receiver” feature, the AV receiver will be set to “Source TV” and will begin playing back the audio from the television.

Modern televisions only have one kind of input that is ARC-compatible (generally marked as ARC at the input).

The HDMI cable must be connected between an ARC-compatible input on the television and the HDMI-Monitor-Output on the A/V receiver in order for television audio to be sent from the television to the A/V receiver via HDMI.

We recommend that you utilize HIGH SPEED cables in order to ensure that all video resolutions are transmitted smoothly and without interruption.

It is necessary to assign the television input to the relevant input in the menu if you are connecting with a coaxial connection.


What exactly is HDMI ARC? It’s possible that you’ve recently set up a new TV or attempted to connect a Blu-ray player and seen the ARC or eARC label on one of your HDMI inputs and wondered what it was all about. If this is the case, keep reading. It’s not obvious from the labeling, but the function is really one of the most useful new home-theater capabilities to emerge in recent years — one that may save you money while also reducing cable clutter and simplifying your home-theater setup. In fact, it is a feature that can be found on all of the finest televisions we have examined, as well as the top soundbars, including the Yamaha YAS-209 and theSonos Arc.

This allows you to simplify your home theater setup while also lowering the amount of cords and even providing higher sound quality than previous methods.

  • Take a look at the top televisions we’ve evaluated
  • TV Buying Guide: How to Select Your Ideal Television

(Photo courtesy of Shutterstock.)

What is HDMI ARC?

ARC is an acronym that stands for “Audio Return Channel,” and it has been accessible on TVs, soundbars, and receivers since the introduction of the HDMI 1.4 standard in 2011. This protocol allows two-way communication between devices to be accomplished using a single HDMI cable. HDMI’s ARC connector, in its most basic form, allows you to utilize HDMI as both an audio input and an audio output device. Since its introduction in 2009, the ARC standard has grown in popularity, and you’ll find it on practically all televisions, soundbars, and receivers released in recent years, as well as on many older models.

HDMI ARC: What you can do

Because of the two-way sound flow provided by HDMI ARC, you can quickly perform several tasks that previously required additional connections to be completed. (Photo courtesy of Tom’s Guide.) To begin, you may connect your audio system to your television using a single HDMI connection. Connect your soundbar to your television using the ARC-capable port that has been assigned for this purpose. You may use this port to connect any device to your television, including Blu-ray players, gaming consoles, and other devices.

  • (Image courtesy of HDMI.org.) Secondly, you have the option of routing these connections through the soundbar itself, which allows you to move the numerous HDMI connections from the TV to the soundbar without having to do any extra setup.
  • It also implies that there will be less wires to install.
  • As an example, audio coming into the TV through an antenna or satellite dish can be produced over HDMI and routed to a soundbar rather than the TV’s built-in speakers.
  • As an alternative, the ARC connection allows you to output that sound to your soundbar without the need for an additional audio wire.

By utilizing the ARC connection for audio and the HDMI-CEC feature (which should be activated by default on your TV), you may decrease the number of cords utilized as well as the number of remote controls required for your home theater system to a bare minimum.

HDMI ARC: Setting up for sound

Depending on the manufacturer of your TV and the individual model, you may need to take a few more steps to get everything activated and set up for ARC functionality. (Photo courtesy of Sony) To begin, establish whether ports are capable of supporting ARC. Most television manufacturers only provide ARC output through a single HDMI port, rather than through all three or four HDMI ports on the set. An indication of this is generally provided by a label on the set itself. If the HDMI ports aren’t clearly labeled, you can go to the TV handbook, which should specify which HDMI port to use in each situation.

Soundbars that are good value for money Second, it’s possible that you’ll need to turn on the ARC output on your TV.

While many TVs are capable of automatically detecting devices with ARC capabilities, some require you to explicitly activate the feature.

Simply said, any HDMI cable will do; there are no special requirements.

HDMI ARC: Possible disadvantages

While the simplicity of ARC and audio-over-HDMI is appealing, they are not without flaws. Due to the fact that the ARC standard was created particularly to replace S/PDIF digital audio outputs (also known as TOSLINK), it is capable of supporting every audio format that would typically be sent by S/PDIF: Dolby Digital, DTS, and PCM audio. It is capable of handling both the conventional two-channel audio and the 5.1 surround sound from the TV without difficulty. (Photo courtesy of Sony) However, it suffers from the same constraints as the S/PDIF standard that it is intended to replace.

In particular, this is aggravating because downstream audio through HDMI can convey the signal without issue; this is solely a restriction of the ARC specification.

It’s not frequent, but depending on the make and model of your television, you may potentially see a reduction in sound quality while using ARC.

The upgrade: HDMI 2.1 with eARC

The next version of HDMI ARC was released in 2018, about the same time as HDMI 2.1 began to appear on televisions. HDMI 2.1 connection offers a slew of advantages, including more bandwidth for greater resolutions and frame rates, as well as innovative new capabilities such as automated game mode selection. However, Enhanced Audio Return Channel, often known as eARC, is a new and better version of the Audio Return Channel (ARC) included in HDMI 2.1. The most significant enhancement provided by eARC is compatibility for full-resolution audio signals, which means that it is compatible with Dolby Atmos and other uncompressed sound formats.

In addition to models from LG and Samsung as well as Sony, TCL, Vizio, and Hisense, you’ll find eARC on nearly every model on our list of the finest televisions we’ve tested.

eARC, in contrast to the old HDMI ARC, which works with any HDMI connection, requires new cables that meet the increased bandwidth requirements of the HDMI 2.1 specification.

But don’t be concerned if you aren’t ready to make the switch just yet; the new connection will continue to work with both existing ARC-equipped soundbars and cables in place.

  • TV Buying Guide: 11 Things You Should Know
  • Netflix’s Best Shows
  • The Best Shows on Netflix

Brian Westover is an Editor at Tom’s Guide, where he writes on anything from televisions to the newest computer technology. His previous experience includes writing for TopTenReviews and PCMag, among other publications.

Samsung TV HDMI ARC Not Working

With a Samsung TV and an HDMI ARC cable, you can eliminate one wire from your wired connections and have sound coming from your TV that is of higher quality and transmits more information overall than with a conventional cable. What can be done, however, if the HDMI ARC does not function properly? Remove any other external devices that are connected to your TV and check that the HDMI ARC cord has been inserted securely. Also check that the cord does not have any obvious damage. Turn on the AnyNet + (HDMI-CEC) feature on your Samsung TV and follow the on-screen instructions.

This connection is a terrific alternative for individuals who want to boost the sound quality of their television while also avoiding a bevy of wires.

Samsung TV HDMI ARC Not Working

The HDMI ARC port on your Samsung TV allows users to reduce the number of cords that they use for audio purposes on their TV and also creates audio that is capable of traveling to and from speakers, which helps to improve the overall quality of the sound as well as its ability to travel without causing any type of delay. What should you do initially if you’re utilizing an HDMI ARC cable with your Samsung TV and it suddenly stops working isn’t obvious. Whenever your Samsung TV’s HDMI ARC doesn’t function, the first troubleshooting step you should do is to remove all of your other external devices from the TV.

Samsung TV HDMI ARC No Sound

Although one of the primary advantages of utilizing an HDMI ARC cord is the ability to reduce the number of cords required to run their television, another advantage of using this cord is the sound that is created as a result of doing so. The sound that comes through an HDMI ARC connection is crisper and more precise, making it a better choice when you want to enjoy high-quality music without experiencing any lagging. If, on the other hand, you are utilizing this cord and there is no sound, what may be the source of the problem?

Take a look at the back of your television and make sure that the HDMI ARC cable has been properly placed on both ends. Make certain by unplugging and re-plugging the cord, then checking to see whether sound has been restored.

Samsung TV HDMI ARC Port Not Working

Even though the HDMI ARC cable itself is not malfunctioning, when you attempt to connect the cable to your Samsung TV, you may see that the real port does not function properly on the television. This can be a more serious issue because it involves the hardware of your television set; nevertheless, there is a simple solution that can restore the functionality of this port without causing too much inconvenience. Check out the remedy below if you are using an HDMI ARC cable and the port on your Samsung TV is not working properly.

If the port is still not functioning, you may try resetting your television by disconnecting it from its power supply for three minutes and then plugging it back in to see if that helps.

Samsung TV HDMI ARC Stopped Working

In the event that you’ve been using an HDMI ARC cable with your Samsung TV and have been enjoying clear sound without interruption for a while, you could be astonished if the connection suddenly stops working and you’re left with no sound coming from your Samsung TV. The good news is that there are a few different methods to deal with this issue, so keep reading to find out what you can do if the HDMI ARC on your Samsung TV stops working. Ensure that the physical integrity of the HDMI ARC cable has not been damaged before proceeding if the HDMI ARC function on your Samsung TV has ceased operating properly.

You might be interested:  How To Hard Reset Samsung A11

Samsung TV Not Showing/Detecting/Recognizing HDMI ARC

It is necessary for your Samsung TV to be able to identify the HDMI ARC cable in order for a connection to be established and for appropriate functionality to be achieved. You should be able to hear sound without any more effort once this is accomplished; however, some Samsung TV users have reported that once the cord has been placed, their TV does not detect the cord and they are unable to use their TV correctly. If this is a problem you are facing, continue reading for a solution. Whether your Samsung TV is not showing, detecting, or recognizing the HDMI ARC that you have inserted, check to see if the Anynet + (HDMI-CEC) feature has been enabled on your TV.

This activation process will differ depending on the type of your television, so be sure to read the exact instructions for your particular model.

How Do You Set Up HDMI ARC On Samsung TV

In the event that you are just getting started with an HDMI ARC cable and your Samsung TV, you may be seeking for some pointers on how to properly set up this device with your TV. The procedure is actually pretty straightforward, but if one mistake is made, the operation of the cord might be disrupted, and you could wind up with a TV that does not have sound and an HDMI ARC connection that is no longer functional. Take a look at the video below to learn how to configure HDMI ARC on your Samsung TV.

As soon as you’ve completed this step, you’ll need to attach the other end of the wire to the HDMI OUT (TV-ARC) connection on the speaker you’re connecting. Finally, switch on the speaker to finish the process.

Related Articles

Inability to connect Samsung TV to Sonos ESPN is not working on my Samsung TV. Xbox on Samsung TV is not working. The Nintendo Switch does not work on the Samsung TV. The Samsung TV’s menu system is not working.

How to use HDMI ARC feature with Smart TVs

We all have TVs with several HDMI connections, which we utilize to connect a variety of gadgets. We could also wish to employ audio solutions, but this would often require a large number of cables. In order for the sound solution to function properly, cables must be run from a variety of devices. An answer to the huge jumble that is one’s entertainment setup exists in the form of the HDMI-ARC connector. While it goes unnoticed, it has the potential to significantly simplify your home theater setup by lowering the amount of cords you require.

  • This means that you may connect your Blu-ray players, set-top boxes, and gaming consoles to your TV, which will then channel all of the audio outputs to the HDMI-ARC linked sound bar or home theater system.
  • It is also capable of transmitting high-resolution audio, including formats such as Dolby TrueHD and DTS HD Master Audio, over the HDMI-ARC interface.
  • You not only reduce the amount of cables, but you also reduce the number of remotes, which helps to declutter a lot of things.
  • In general, allHDMIcables that are included with Smart TVs offer high data transfer rates.
  • It is possible that the ARC functionality will not operate correctly if you are using an extremely old HDMI connection in rare instances.
  • The other end of the wire should be linked to the appropriate HDMI-ARC equipped device after the input port has been connected.
  • Step 3: Manually configuring the system Alternatively, if your TV is having trouble recognizing the HDMI-ARC connection, you may manually configure it by opening the Settings menu.
  • Your TV will route all of its output to the ARC-connected sound systems as soon as the connection is made and verified as successful.
  • Take note that these settings may change from one manufacturer to the next, and you may need to consult the user manual to determine the right settings.

If you would like to see a demonstration, simply walk into your nearest Reliance Digital shop. Adapter for HDMI ARC A link between an HDMI ARC and a computer Home theater with HDMI ARC TV with HDMI ARC HDMI ARC vs. regular HDMI ARC on HDMI vs. optical

How to Tell If Your TV Supports HDMI ARC

Input devices such as a Blu-ray player, Playstation 5, Xbox One X, and other devices that produce high-definition video should be connected to a television through HDMI. Since its introduction as a standard connection in the early 2000s, HDMI has undergone a number of enhancements to make it even better and more versatile. One such feature is HDMI ARC, which allows audio to be sent over a single channel. However, not all televisions and input devices are capable of supporting ARC, making it difficult to determine whether your gadgets are capable of supporting ARC.

If an HDMI connection is branded with “HDMI ARC” or “ARC,” it indicates that the TV is compatible with it.

It is quite simple to determine whether or not your television supports HDMI ARC capability.

Furthermore, in order for HDMI ARC to function properly, your input devices must also support HDMI ARC as well.

How to Tell if Your TV has HDMI ARC

As previously stated in this post, knowing whether or not your television is equipped with HDMI is not difficult. However, depending on how easy it is to get to the back of your television, it may be just as difficult as locating some loose coin that has fallen beneath your vehicle seat. In order to determine whether or not your television has an HDMI ARC port, you must have visual access to the back or side of the display. When the device is mounted on the wall, this becomes more difficult. Photograph or record it with your phone if you can wedge it between the wall and your television.

With this phone behind the TV approach, you may be able to view the ports more clearly without having to squeeze your head into a small space.

Alternatively, you may consult the user manual for your television to see whether or not it is HDMI ARC compatible.

To check for authenticity as a last option, you can contact your television maker or visit their website.

The Benefits of Using HDMI ARC

A extremely high-tech version of HDMI, HDMI ARC, is not just a catchy phrase; it is actually true. However, it is possible that it is not what you expect. Its acronym stands for Audio Return Channel, and it allows audio to be delivered between external devices and a computer using only a single wire. For example, you may stream audio from your Blu-ray players, game consoles (such as the PlayStation, Xbox, and others), and other HDMI-compatible devices to your TV via an HDMI cable. Also possible is to connect your TV to other devices such as a surround sound system, an audio receiver, or even a soundbar, all with only a single HDMI connection.

Isn’t that interesting?

If you have a smart TV and are watching Netflix through it, the audio will be routed to a soundbar or an A/V receiver.

Additional information If you follow the above example, you will never need to swap cables or utilize an input selector.

Another advantage of utilizing HDMI ARC is that you can manage both the audio and the volume with a single remote control, which is really convenient. Additionally, the speaker system shuts off with your TV, reducing the number of electrical devices you have to remember to turn off.

Do you Need Special ARC-Compatible HDMI Cables?

HDMI ARC does not necessitate the use of special HDMI cables. ARC is supported by all HDMI cables. It is true that ARC may be used with your regular, everyday, daily HDMI cable. There is no need for a specific version. If an HDMI cable is promoted as “ARC compatible,” it is only a marketing ploy to attract customers. Choose the lower-cost alternative since they will provide the same level of service as ARC.

Is it Worth it to Pay More for HDMI eARC?

Some recent smart TVs, like as theSamsung 65-inch FRAME Smart TV (available on Amazon), are equipped with HDMI eARC, which is the older, younger sibling of HDMI ARC. The word “eARC” refers to the Enhanced Audio Return Channel, which is effectively the same thing as the ARC in terms of functionality. Unless you are a committed audiophile, spending a significant amount of extra money on a television merely to include eARC may not be the wisest idea. The “improved” experience, on the other hand, is recommended if you want the finest audio experience possible and don’t mind spending a little additional money.

The Differences Between HDMI ARC and HDMI eARC

The ability to support HDMI ARC or eARC is now standard on nearly all televisions. Since ARC compatibility became common on nearly all televisions and television audio systems in 2009, there is a very good possibility that you have at least ARC compatibility if you purchased your gadgets after that time. If you have a smart TV, there’s an even better possibility that you have HDMI ARC or eARC, because these technologies weren’t generally accessible or inexpensive until the mid-2010s. So, there’s HDMI ARC and there’s eARC; what’s the difference between the two?

  • The HDMI 2.1 standard included the eARC audio connectivity capability, which is a more recent audio connectivity option.
  • Furthermore, it is more automatic than eARC, which means that you will have less settings to toggle than with ARC, which is a plus.
  • If this is the case, you’ll be equally satisfied with ARC and eARC, and you shouldn’t choose your device only on the basis of eARC/ARC compatibility.
  • Here’s a quick rundown of some of their key capabilities:
  • The following audio formats are supported by HDMI ARC: compressed 5.1 audio, uncompressed 5.1 audio, uncompressed 7.1 audio, high bitrate and object-based audio (up to 192kHz, 23-bit) – also known as Dolby Atmos and DTS:X
  • HDMI eARC: uncompressed 5.1 audio, compressed 7.1 audio, and high bitrate and object-based audio (up to 192kHz, 23-bit).

How to Connect a Samsung Smart TV to a Home Theater

When shopping for a new television, the most important elements to consider are the screen size, image and sound quality, durability, and connection, among other things. Samsung appears to have anticipated the desires of today’s smart home enthusiasts, and the company is now head and shoulders above the competition in terms of manufacturing high-end smart televisions that are focused on performance. A Samsung smart TV, which serves as the focal point of your smart home, is committed to providing homeowners with access to a plethora of material that goes beyond streaming!

  • However, despite the fact that their Samsung smart TVs have excellent sound quality, the majority of homeowners would want to increase the volume of their sound output.
  • So, what exactly has to be done in order to improve the sound quality of your TV’s internal speakers?
  • For those who are presently experiencing difficulties connecting their Samsung smart TV to their home entertainment system, we have several solutions.
  • A wide variety of alternatives are accessible to you, and we will cover virtually all of them in this article.

This website is financed by its readers, and we receive compensation if you make a purchase from a store after clicking on a link on our website. As an Amazon Associate, I receive money when people make qualifying purchases via my links.

Method 1: RCA Connection

If you want to improve your television listening experience, this is likely the simplest and most basic approach to employ. Only the analog stereo outputs of your Samsung smart TV, which are commonly referred to as RCA outputs, will require connection to an external audio system, such as a home theater, to complete the setup. The following are the procedures to be followed:

  • Connect the mini-stereo connector (3.5mm) to the audio output of your television, using the analog stereo cables that you have at your disposal. Connect the identical RCA plugs to the audio in ports on your home theater system after that. After that, switch on your home theater and follow the on-screen instructions that will be presented. Then, on your home theater system, pick the input that will allow you to hear the sound.

If everything went according to plan up until this point, you should have been able to properly connect your Samsung smart TV to your home entertainment system. It is important to note, however, that most contemporary television sets, including Samsung ones, do not usually have the 3.5mm or RCA analog inputs as standard. So, if this is the situation with your television, don’t be concerned; simply go and apply the next option that we will be providing you shortly.

Method 2: Digital Optical Connection

A variety of factors contribute to the popularity of home theater systems, and one of these factors is unquestionably the multitude of connectors available for delivering audio and visual information to your television. The digital optical link is one sort of connection that is particularly well suited for audio. A digital optical connection, for those who are unfamiliar with the term, may be defined as a physical connection that incorporates the use of fiber optics (light) to transport audio data from one suitable device to another through the use of specially engineered connectors and cable.

  • Take your digital optical cable and link the digital audio output out from your TV to the digital audio in on your home theater system using the digital optical cable. After that, you should switch on your home theater system. Take the remote control for your home theater unit and use it to set the HTS to the input to which you attached the optical connection. Please keep in mind that a substantial number of home theater system remote controls have a button that allows you to switch between multiple inputs. It is necessary to push the button if this is the case before proceeding on. This is the stage at which you should be able to hear the sound emanating from the speakers of your home theater system. If, on the other hand, you are not hearing any sound coming from your home theater system speakers, take your remote control and check the audio output settings on your television, looking for the PCM option. It will aid in the resolution of the problem. Typically, this sort of problem arises with home theater systems that have optical audio input functionality but do not have built-in Digital Dolby or DTS 2.0 PLUS decoding capabilities
  • Nonetheless, this type of problem can occur with any home theater system. It is also important to remember that, depending on the settings of your home theater system, not all of the speakers will produce sound when a two-channel signal is received. Most home theater systems, on the other hand, have a capability that converts a two-channel stereo system into multiple channels or multi-speaker signals, resulting in more exciting sound overall. This means that if your Samsung television is broadcasting a 2-channel signal to your home theater, you’ll need to enable this option on your Samsung television. Alternatively, you may go through your user handbook and figure out how to go about it
You might be interested:  How To Factory Reset Samsung Smart Tv

Method 3: The ARC – HDMI Connection

Another excellent method of connecting your Samsung television to your external sound enhancers is through the use of an HDMI cable. The Samsung TV must, however, have an HDMI connection input labeled MDMI-ARC in order for you to successfully complete your connection utilizing this approach. However, what exactly is HDMI-ARC? This particular function, known as Audio Return Channel, is supported by a significant number of Samsung smart televisions. In order to reduce the amount of wires that must be connected between your television and an external sound system, such as a home theater, this function has been included.

You will not require a second audio or optical connection to connect to your external speakers as a result of this configuration.

In addition, you may need to make changes to the settings of your home entertainment system in order to make the HDMI-ARC controls functional.

Note that the HDMI-CEC protocol is referred to as Anynet+ on Samsung televisions, which is an important distinction to make. To enable this function on your Samsung television, follow the steps outlined below:

  • Then, using the HOME button on your Samsung TV remote control, select the Settings option. GENERAL MENU may be found on the settings screen by selecting it. After that, pick EXTERNAL DEVICE MANAGER from the drop-down menu. Following that, a menu will appear, displaying the Anynet+ option for you (HDMI-CEC). By selecting it and pressing the enter button on your remote, you may either turn on or off this function.

Connecting your television to your home theater system with HDMI-ARC is as follows:

  • To begin, you must determine whether or not your television is equipped with an HDMI-ARC connector. This connector is commonly branded ARC on the back of Samsung televisions
  • However, this is not always the case. Turn off your television as well as your home theater system now. Afterwards, connect the HDMI cable to both the HDMI-ARC/output of your home theater system and the HDMI port on your television set. After you have completed this, proceed to switch on both of the appliances.

Method 4: Connect your Samsung TV to your home theater using Bluetooth

Bluetooth connectivity is available on the majority of Samsung television models, allowing them to connect to a wide range of devices. When you use the smart Samsung share feature on your TV, you can quickly and easily establish a connection. And this implies that if your home entertainment system is Bluetooth-enabled, this may be the ideal option for you to pursue. One important advantage of this technology is that it does not require the use of wires, since it is totally wireless. This is a significant advantage over other methods.

The following are the steps to take in order to complete this procedure:

  • Take the remote control for your television and hit the HOME button. After that, pick the settings option. Select the sound menu from the displayed screen, and then the sound output option from the drop-down menu
  • Afterwards, pick the speaker list to which you’d like your TV to be connected by clicking on it. In this situation, you should choose your HTS. You must ensure that your Bluetooth device is turned on and in the pairing mode before proceeding. Select the pair and connect option, and then wait for your home entertainment system to respond as expected. Ensure that your home theater system is properly powered and that it is not currently coupled with any other devices if you are experiencing difficulties. Additionally, move it closer to your television, preferably a meter or two away from your screen. You may also choose to power cycle the HTS and the television. To proceed, click OK when both the television and home theater systems have completed their pairing
  • If everything was done correctly, you should have been able to successfully link the two electrical devices at this point.

No one can deny that Samsung’s smart televisions are among of the most impressive products available on the market. In addition, while they have excellent audio output, most of us would like to make it even better by connecting their Samsung smart TV to an external sound system such as a home theater system. In this day and age of technology, there are several solutions available for connecting your television to a home theater system (HTS). In this section, we have supplied you with four easy, practical, and simple approaches to follow.

How to Fix Samsung Smart TV HDMI ARC not Working 2022

A large number of functions should be accessible and accessible due to the large number of connections on the smart TV. Other devices may not be able to be connected to your Samsung Smart TV if the HDMI ARC function is not functioning. Your television may be connected to soundbars or a smart hub, depending on your preferences. As a result, you may have been unable to link such gadgets with your smart tv since the ARC had ceased working. Audio devices are connected to the Samsung smart TV through HDMI connectors, which are built into the TV.

When the Samsung Smart Tv ARC is not operating, the sound is not delivered to the viewing device.

ARC stopped working on a Samsung TV is a fairly common problem that can be resolved very quickly and easily.

There are several techniques for resolving the issue, but you may end when you have identified the approach that has resolved the issue.

Samsung TV ARC Stopped Working

In order to resolve the Samsung Smart Tv Arc not functioning issue, follow these steps.

On your smart TV, you must complete these troubleshooting steps in the exact order they are listed. How to Resolve Samsung Smart TV HDMI ARC Not Working Problems

Solution 1: Check HDMI-CEC:

When HDMI-CEC is turned off, it is possible for Samsung TVs to stop functioning properly using the ARC feature. ARC functionality will not return until the HDMI-CEC function on your Samsung Smart tv has been enabled again. Some Samsung televisions are capable of supporting HDMI-CEC with the use of Anynet Plus. In order to avoid confusion, if you see Anynet + on your TV rather than HDMI-CEC, this is normal. Reactivating HDMI-CEC or Anynet + is simple if you follow the steps below: Also Check out this article for further information on how to resolve the Samsung TV Mode Not Supported error.

  1. Step 1: Press the Home button on your keyboard.
  2. Navigate to the Configuration options menu.
  3. Navigate to the GeneralExternal Device Manager tab.
  4. Anynet+ should be enabled (HDMI-CEC) To determine whether the problem is still present, you should do a check.

Solution 2: Run HDMI Diagnosis

Your smart TV is either not producing any sound or is only partially producing sound. This indicates that the HDMI cable is of poor quality. You may potentially be able to address the problem by changing the cable. It is necessary to replace the cable every time there is an output problem. It is feasible to find an alternative solution to these types of challenges. The HDMI signal on Samsung TVs may be stabilized using an inbuilt mode, which also improves the compatibility of the HDMI connection with the TV.

  1. When you want to get to the menu, press the Homebutton. Select Support, then Device Care from the drop-down menu. Then chooseSelf DiagnosisandSignal Information
  2. After that, chooseSignal HistoryHDMI Delay Level
  3. And last, chooseSelf DiagnosisandSignal Information. Select one of the following options now:

Basic:This function establishes the default configuration for routine operation. One-second delay before it is determined that there is no signal coming from the HDMI connection is referred to as Slow 1. Slow 2: Significantly increases the time it takes for the sound to play. Choosing Slow 1 and then Slow 2 should be used if the HDMI connection does not have a strong signal. This improvement will be beneficial to HDMI cables that are in poor condition. It’s conceivable that the sound will be delayed for any reason.

Solution 3: Check the Sound Output

In the event that you utilize your Samsung TV in conjunction with a third-party soundbar. Check to see if HDMI ARC is enabled. After that, you’ll need to change the HDMI ARC input source on your speaker. When your TV is equipped with ARC, you will have no trouble hearing the sound. This may be accomplished by selectingSettingsSoundSound Output. Choose Receiver from the drop-down menu (HDMI).

Solution 4: Check HDMI Cable

If you wish to use the ARC feature on your Samsung TV, you must first enable it. HDMI cables of high quality should be used for this purpose. It is necessary that the audio wire be in good functioning order. The ARC, on the other hand, will only work if there is no damage to the cable. Inspect the audio wire to ensure that it is free of physical damage and that nothing is damaged. If there is no evidence of damage to the cable’s outside, the cable is considered to be in good condition. There is a possibility of internal harm occurring.

With the use of a multimeter, you may readily determine whether or not there is interior damage. If there is internal damage to the cable, we strongly recommend that it be replaced with a new cable. Using approved cables rather than third-party cables will yield better results.

Solution 5: Check the Audio Format

It’s possible that “Anynet +” will not recognize the audio format. This is the reason why the HDMI ARC on the Samsung Smart TV is not working. The Samsung TV can only playback MPEG, MPEG4, FLAC, OGG, WMA, Wav, MIDI, APE, AIFF, and ALAC files. It does not support any other formats. You should listen to the audio in this format, since it is more convenient. The audio format is not supported by either the smart tv or Anynet+. You should contact the customer service center if you want any information on the format.

Solution 6: Reset the Soundbar Settings

There shouldn’t be any issues with the HDMI cable or the configuration. ARC is still not functioning correctly. In some instances, you’ll need to reset the Soundbar’s default settings to their original values. This procedure will instruct you on how to reset your soundbar:

  1. Make sure that the smart TV and the Soundbar are turned off. It is advised that you hold both the Volume Up (+) and Down (-)buttons at the same time for 5 seconds. The word INIT will be shown. Turn on the television and the soundbar. SelectSettings from the drop-down menu. Change the sound output to that of a sound bar. After the sound begins to play, a pop-up notice is displayed on the smart television.

Solution 7: Check for Software Updates

It may be necessary to update the firmware for your inputs in order to address some HDMI Arc difficulties. If you are having troubles with your Samsung television, then taking this step is very necessary. Take the following actions if you find yourself in this situation:

  • Navigate to theSettingspage, selectSupport, and then click onSoftware Update. Choose the option to “Update Now”

You may also choose to have the option to update automatically if that is what you want.

  • Navigate to theSettingspage and choose Supplier t. Select “Software Update” from the drop-down menu. Make that the Auto-Updatefeature is highlighted and that the option is turned on.

Following the completion of the update, the television is rebooted in order to resolve the difficulties.

Wrapping It Up

If your Samsung smart TV is not receiving HDMI ARC signals, this is a typical problem that happens when the cable is unsuitable or the settings are wrong. However, by enabling the Anynet+ feature, you will be able to quickly and simply address the situation. Check the output of the soundbars, fix the HDMI interface, review the format of the audio, and finally reset the soundbars if none of the above solutions are successful. Check to see that the cable is not broken or that it is correctly attached.

FAQ About Samsung Tv ARC Stopped Working

1st, hit the “Home” button on the TV remote control to bring up the menu. 2.Select General from the Settings menu. Anynet+ may be found by selectingExternal Device Manager and then Anynet+ (HDMI-CEC). 4.To activate it, hit the “Enter”button on the remote control once.

2. What is Samsung TV HDMI ARC?

ARC is an abbreviation for Audio Return Channel. When using HDMI ARC, you may minimize the number of HDMI cables you use on your Samsung television. Signals may be sent more quickly as a result of this.

3. Does my Samsung TV have HDMI ARC?

The quickest and most straightforward way to determine whether your Samsung TV supports HDMI ARC is to look at the HDMI port. A label with the ARC symbol is shown on televisions that support HDMI ARC.

Leave a Reply

Your email address will not be published. Required fields are marked *