Where Is The Hdmi Port On A Samsung Tv


Do Samsung TVs Have HDMI Arcs? (And How to Use Them)

When you use your Samsung TV to play video games, watch programs, or listen to music, you might soon accumulate a maze of tangled connections. In order to remedy this issue, engineers developed something known as a “HDMI Arc.” As the name implies, this basically feeds media straight to your TV, eliminating the need to fiddle with AUX wires and other cables. Do Samsung televisions, on the other hand, have this feature? HDMI Arcs are seen on a large number of Samsung televisions. Using this method, all audio and video from an output device is sent to your television.

Learn more about how to use your HDMI Arc and what it implies for your smart home experience by continuing reading this article.

Do Samsung TVs Have HDMI Arcs?

Most televisions (including Samsung televisions) are equipped with HDMI Arcs that are pre-installed. However, if you’re trying to improve the sound quality of your system, you might invest in anHDMI Arconline. If you have an older television or sound system, you may want to consider purchasing an external HDMI Arc.

How Do I Know if My TV Has an HDMI Arc?

If you’re not sure whether your television has an HDMI Arc built in, look at the input and output ports on the back of the television. They should be situated on the bottom or the rear of the device, preferably both. It should mention HDMI (High Definition Multimedia Interface) beneath the HDMI port (ARC). This is by far the most reliable method of checking whether your television is equipped with this function. If, on the other hand, you don’t feel like looking via your TV’s HDMI ports, you may perform the following:

  • Check the instructions in your user handbook. The manual that came with your television should mention all of its input ports, including whether or not it has HDMI Arc capability. You may change your input options by scrolling through them. When you open the input menu on your Samsung TV, you may notice that it says HDMI (Arc) when you make your option.

How to Connect HDMI Arc on Samsung TV

For the HDMI Arc to work properly, you’ll need three items: a Samsung TV, an HDMI cable, and a speaker. The HDMI Arc port on your Samsung TV should have already been fitted when it was purchased. Before you begin, double-check that your television and speaker are both connected to a power source. From here, you may do the following:

  1. Find the HDMI IN port on the back of your television. Connect the HDMI cable to this port by plugging it into either end. Locate the HDMI OUT on your speaker and press it to activate it. Connect the HDMI cable to this port.

When you switch on your television, the sound should begin to play automatically through your speaker system.

Troubleshooting Setting Up Your Samsung TV’s HDMI Arc

If you are experiencing any difficulties when utilizing HDMI Arc on your Samsung TV, examine how the following alternatives might be able to help you:

Use a Different HDMI Cord

According to CNET, HDMI version 2.1 is the most recent available. Consequently, if you purchase an HDMI cable from a major merchant, it will most likely operate at that speed. A more recent HDMI cable (1.3 or less in length) will, however, not be compatible with your Samsung HDMI Arc monitor and will not function. Better off switching to a newer, more up to date version.

Make Sure You Have Anynet+ (HDMI-CEC) Enabled

This function enables your HDMI cord to “communicate” with your television. To make this setting active, follow these steps:

  1. Press the home button on your Samsung remote control to return to the home screen. Obtain access to the television’s settings
  2. Select “General Menu,” then “External Device Manager” from the drop-down menu. Select Anynet+ (HDMI-CEC) from the drop-down menu. To turn it on, press the “Enter” key on the remote control.

Turn on Your TV’s Receiver

If your television is more than four years old, this option is likely to function well for you.

To switch on the receiver on your television, do the following:

  1. Press the “Home” button on your remote control
  2. Select “Settings.”
  3. Select “Sound.”
  4. Select “Speaker Settings.”
  5. Select “Receiver (HDMI)” from the drop-down list

Reset Your Speaker

If this is the first time you’ve used your speaker with an HDMI Arc, you might want to try resetting it before turning on your television. The procedure for resetting your speaker is different depending on the device you have. If you have a Samsung Soundbar, for example, you may reset it by following the instructions outlined below:

  1. Turn off your television and soundbar. Press and hold the “+” and “-” buttons for a total of five seconds. Turn on your television and soundbar. Click on the “home” button on your remote control
  2. “Settings” will be shown. You may now direct the sound output to your soundbar

Unplug the Cables, Then Plug Them Back In

Turn off your television and soundbar; remove your headphones. Press and hold the “+” and “-” buttons for five seconds to begin the game. Set your television and soundbar to the appropriate settings; Using your remote, press the home button. “Settings.” will be shown. You may direct the sound output to your soundbar.

How Are HDMI Arcs Used on Samsung TVs?

The objective of HDMI Arcs is to minimize the number of wires in your entertainment system while also streamlining it. “Channels” are a term used to describe the structure of audio. The greater the number of audio channels supported by a speaker, the more colorful and rich the sound. According to Samsung, HDMI Arcs TVs are compatible with the following audio formats:

  • PCM is an abbreviation for Personal Computer Memory (two-channel). This is for digital audio tracks with a two-channel output. Dolby Digital is a digital audio format that is often used with CDs and DVDs (up to 5.1 channels). A DTS Digital Surround sound system, which offers five channels of sound, which is widely heard in feature films (up to 5.1 channels). This is a typical occurrence with Samsung televisions manufactured prior to 2018. Also similar to Dolby Digital in that it generates five layers of sound, but it offers less compressed sound
  • It is also comparable to Dolby Digital in that it produces five levels of sound.

The best option for you is heavily influenced by the type of speaker you’re using.

Final Thoughts

The majority of Samsung televisions on the market now are equipped with HDMI arcs. Connecting your speaker to your TV with an HDMI connection is all that is required to use this functionality. If this doesn’t work, think about how the troubleshooting approaches listed above can be of use to you.

No HDMI port on Samsung UE55JU7000

I didn’t bring the television with me, and it has been quite some time since we purchased it. If we didn’t receive one, do you believe Samsung will give us another one?

Thread starter Similar threads Forum Replies Date
G QuestionSamsung G9 or 48 inch LG C1? Displays 9
F QuestionSamsung G7 restarting on program change/screen overlays Displays
QuestionSamsung Syncmaster b2030n EDID Displays
K QuestionLocked options in Samsung Monitor Displays 1
R QuestionIs the Samsung Odyssey G7 32″ 1440p Worth It? Displays 4
H QuestionSamsung 49″ CRG9 stopped displaying picture or even the OSD menu? Displays
R QuestionNeed Help, Having the worst luck with Displays Displays 3
QuestionPower supply problem with UPS Displays 3
QuestionIs there any way to reinstall the same firmware on a Samsung SA350 monitor? Displays

Why Samsung TV Won’t Switch To HDMI? Easy Fix Guide!

If your Samsung TV won’t convert to HDMI and you’re not sure what to do, read on. In any case, we’re all aware that working with HDMI cables may be a frustrating experience at times. Even if everything in your configuration is working well, there is still the possibility that one cable or port will be experiencing connectivity issues. For this reason, we will explain all you need to know about your HDMI cablesports in this page, as well as how to troubleshoot any problems that may arise! If the TV does not identify the HDMI cable, it is possible that Samsung will not connect with it.

Another possibility is that you made a mistake while selecting an input port from your TV’s sources menu, in which case the problem might be a simple logic conflict.

In that regard, we’ll go through the reasons why your Samsung TV isn’t working with HDMI in the next section.

Why Samsung TV Won’t Connect to HDMI?

This issue might be caused by a fault with the hardware or software. For example, there might be an issue with your TV, or more particularly with the HDMI inputs, or there could be a problem with the cable itself. In circumstances when your HDMI cable is twisted, under strain, or not completely connected in, you may be having problems. Before you do anything else, you must first determine which HDMI TV port your cable is connected to. Once you’ve done so, navigate to the inputs menu and make sure that the particle HDMI input source is highlighted.

For example, there are HDMI 1, HDMI 2, HDMI 3, and so forth.

It is possible that you will not be able to obtain any output if the HDMI output source on your device is faulty or if it has any hardware difficulties.

You don’t have to be concerned since we have you covered, no matter what the situation is. Let us immediately begin the process of finding and, hopefully, resolving the issue.

How To Fix Samsung TV Won’t Switch to HDMI?

First and foremost, we will do a basic hardware troubleshooting procedure, therefore please bring another HDMI cable that has been shown to function so that we can rule out some of the more serious options.

Solution1 Check HDMI Cable

The first step in determining the possible harm caused by the problem is to confirm that your HDMI cable is in proper operating condition. Try disconnecting and reconnecting the cable to see if that helps; if the outcome is the same, try connecting the cable to a different port to see if that helps. After that, navigate to the source menu on your Samsung TV and choose the appropriate input source from the list. Pro Tip: Experiment with different ports. If it still doesn’t work, it would be ideal to try it with another HDMI cable that is in good working order.

In the event that the problem persists after the use of a new HDMI cable, you can go to the following step.

Regardless of the strategy we use, we will be able to pinpoint the source of the problem.

Solution2 Verify External Device

If your external device is causing problems, you may not be able to switch to HDMI at all at times. In other words, if the device to which you are attempting to connect through HDMI is not completely operational and switched on, you will not be able to see anything on this input. Note: If you are using a Windows device, make sure that the device is not currently at the Windows Login Screen before continuing. The most effective technique to determine whether the problem is with your external device is to test it with another functional device.

If your Samsung TV refuses to convert to HDMI even when connected to another device, we have narrowed the range of possibilities to the point that we can infer that the problem is either with the TV’s hardware or with the television’s software.

Solution3 Check Sources

Now that we’ve established that the problem is tied to the television, let’s look into it further. Some television sets may not come pre-loaded with all of the available sources. For example, if your HDMI is linked to input source3, you would need to select ” Add Source ” and manually place the source into the list. It’s possible that you’ll see an option called “Add Computer Source” if you’re using a desktop PC, which is built specifically for this type of operation. Take into account your external device and provide a source that is compatible with its infrastructure.

You might be interested:  How To Get Samsung Pay Off Home Screen

Let’s get it up to date!

Solution4 Update Samsung TV

The interface of Samsung, and in particular the sources page, is being modified in conjunction with newer firmware updates. Your system may not be able to correctly recognize the HDMI port input if you are using an earlier version of your TV or if you are using an older version of your system. As a result, our next recommendation in the troubleshooting procedure is to upgrade your television’s firmware to the most recent version available. To upgrade your television, navigate to theSettingstab and select theSystem option.

Any software versions that are detected should be downloaded and installed immediately.

Please keep in mind that your television may need to be restarted numerous times throughout the updating process. It is also advised that you check to see if your external device has been updated at this time. In addition, if there are any outstanding updates, please sure to install those as well.

Solution5 Power Cycle

Even though it appears to be a simple solution, many users have experienced temporary software glitches that might be the source of the problem. In this case, we recommend that you unplug all of your gadgets from their respective power outlets and wait a few minutes before continuing. Wait a few minutes and then restart everything to see if there is any output coming from the source (if there is).

Solution6 ReconfigurationDrivers

It doesn’t matter what kind of external device you are using or what operating system it runs on; there is always a setting that allows you to mirror your default screen or utilize your HDMI port as a main screen. For example, if the configuration indicates that there is no external display or that there is nothing attached, it is possible that you are missing a driver. Download or update the drivers according to your GPU model, then execute a power cycle as described in solution 5 and run tests on the results.

Continue reading: Why is the volume on my Samsung TV set too low?


In conclusion, we can state that if a Samsung TV refuses to convert to HDMI, there might be a variety of plausible causes for this. If you are still unable to get output through your HDMI connection after reading this text, it is possible that there is a hardware problem with your TV or with your HDMI cable itself. We urge that you contact Samsung support for extra assistance in order to justify this. A IT professional with extensive industry knowledge and expertise. His ability in resolving technological challenges is well regarded.

No signal from Samsung TV HDMI ports? The fix!

When it comes to home entertainment systems, HDMI is a must-have. For Samsung televisions, video projectors, gaming consoles, streaming devices, and set-top boxes, this is the standard connecting cable to be used. If you connect an external media player to your Samsung TV, such as a set-top box, Xbox, desktop computer, or PlayStation, the content should appear on the screen. However, if it does not, or if the Samsung TV HDMI port displays a red power indicator, you will receive an error message stating that there is no signal available.

When an HDMI cable is broken or if the resolution of your input is not suitable with the specifications of your Samsung TV, a Samsung TV will generally not detect it, even if it has been connected correctly.

There are, of course, additional considerations to take into account.

Why Samsung TV HDMI ports are not working

The HDMI ports on your Samsung TV are not functioning due to any one of the following reasons or a combination of them:

  • If you’ve set your television to an input that doesn’t have any devices connected, you’re in trouble. Power has been cut off to the source or the source is not operational
  • The HDMI cable has come undone on both ends, resulting in a tangled mess. There is a mismatch between the resolution of your source and that of your Samsung TV. You are making use of a faulty HDMI cable.

Another possibility is that the turn-on sequence for your devices is interfering with the reception of HDMI signals on your Samsung TV.

To resolve the “HDMI no signal” problem on your Samsung TV, try the following troubleshooting steps:

Verify that you have powered on the connected device

When you connect a device through HDMI to a newer Samsung TV (those built after 2017), the TV should recognize it instantly. However, if the power to the linked device is turned off, this will not be possible.

  • Remove the power from the external device
  • Wait approximately 10 seconds before turning it back on.

Check to check if the solution works by watching it on your television.

Select the correct input source on your TV

When you connect an external device to your Samsung TV, the first thing you must do is set the source on the TV to the same port that you used to connect the item to the television. To put it another way, if you connected your game console to the HDMI 1 port, you need also change the source on your television to HDMI 1. If the TV does not show any signal when the HDMI cable is put in, it is possible that you have the ports switched.

Reconnect the HDMI cable

It is possible that the HDMI cable came out loose or that you did not connect it correctly. Consider unplugging it from the back of your TV as well as your source of power. In addition, if your Samsung TV is not recognizing HDMI from a computer, use the same procedure as before. When you’re finished, you can:

  • First, ensure that the HDMI cable is securely connected to the external device or PC. After that, connect it to your television.

If it doesn’t work, try attaching the cable to a different port on the computer instead. As previously mentioned in step two, you will need to pick the new source on your television.

Use a different HDMI cable

It’s possible that you’re using a cable that isn’t compatible with your television. It is also possible that a broken HDMI cord will prohibit you from connecting. If you’re having trouble connecting your Xbox, PlayStation, or Roku to your Samsung TV or any other device, try using a different HDMI cable. If it appears that the cable is the source of the problem, consider replacing it. I recommend theiVanky high-speed braided cable since it is excellent for streaming high-definition information without lagging and because it is braided, there is a little likelihood of damage occurring during the transmission process.

Change the order in which you turn on your devices

If you switch on your TV first, then the external devices next, attempt to modify the turn-on sequence. In other words, switch on the external device first, followed by your Samsung TV. If that order works, try using it henceforth.

Power-cycle the external device

When you power cycle an external or input source, the parameters of the source are reset, allowing it to start from the beginning.

  • Unplug the gadget from the power strip or wall outlet
  • Remove the battery from the device. Wait around 60 seconds
  • Reconnect the source input to the computer.

Turn on the electricity and give it another shot. Consider also power-cycling your television by following the instructions outlined above. It will assist you in resetting the television.

Check for software updates

Some HDMI handshake difficulties can be resolved by upgrading the software for the inputs on your computer. If your Samsung TV continues losing its HDMI signal, this step is very necessary. Specifically, in this situation, you should perform the following:

  • Go to Settings, then Support, then Software Update, then Update Now
  • Then press Enter.

You may also enable automatic updates by selecting the appropriate checkbox on the settings page.

  • Activate Auto Update by going to Settings -> Support -> Software Update -> Highlight Auto Update and turning it on.

Your television will be updated on its own. Once this is completed, attach your external input and test it to see whether it works.

Be aware that, despite the fact that updating your Samsung TV software is required, many people have reported experiencing difficulties after upgrading their firmware. In such situation, you will need to contact the manufacturer of your television for more assistance.

Factory reset your Samsung TV

A factory reset will allow you to restart your computer from the beginning. It will clear the settings, which means you will have to configure the HDMI inputs from scratch. Here’s how it’s done:

  • Activate Settings, then General, then Reset
  • Enter your PIN or 0000, then Reset
  • Choose OK to complete the reset.

You may also go to SettingsSupportSelf DiagnosisReset from the main menu.

Connect a different external device

In this part of the troubleshooting process, you’ll try to figure out if the problem stems from the original external device or your television. For example, instead of connecting your set-top box, consider connecting your computer. If the PC is operational, the set-top box is the source of the problem. If this is the case, you should contact the manufacturer for more assistance. Additionally, if both displays the error and you have followed the instructions indicated above, you will need to get your television serviced.


Try troubleshooting the problem whenever you attach an external device and observe that your Samsung TV will not switch to HDMI. This will help you to discover a solution. The first step is to double-check that you have picked the correct input source. Additionally, make sure that the HDMI cable is not slack on either end. You can experiment using a different cable or reverse the turn-on order for your inputs to see if it helps. Related

  • How to configure the network settings on a Samsung television
  • How to fix a Samsung television that keeps turning on and off frequently

Samsung Tv Not Recognizing HDMI Input

Watching the high-quality picture on the smart TV is a really nice experience. Aside from that, HDMI is utilized to transmit high-definition pictures, audio, and other digital information of high quality. It is the primary connection cable between the Samsung Smart TV and other devices such as the Playstation 3, Xbox 360, and video projectors, among others. So, what is the root reason of the Samsung TV not detecting the HDMI input? HDMI is an acronym for high-definition media interface, which not only connects additional media devices such as smart hubs and set-top boxes, but also transmits high-definition video.

To put it another way, it displays material on the Samsung TV.

If the Samsung TV is not recognizing the HDMI input, try another HDMI source.

As a result, you should have a thorough understanding of the problem and be able to resolve it entirely.

What Prevents HDMI Input not Recognizing on Samsung TV

It is possible that the Samsung TV is not detecting the HDMI input because the specifications are not compatible with the TV. However, there are several fundamental reasons why the HDMI input on the Samsung smart TV is not recognized:

  1. Broken cable: If there is one thing that stops the HDMI input from being used with a smart television it is the broken cable. Check to see that the cable is operational and that there is no evidence of physical damage to the cable’s outer sheath. Inadequate power supply: When sharing the input sources to the television from the smart hub device, power is one of the most significant considerations. For example, if the external device cannot be powered on because the power supply cord is inadequate
  2. The issue with the input source is that there are many different source ports available these days. If the Samsung TV does not recognize the HDMI input, the following steps should be taken. It is possible that there is an issue with the setting of the input source. Outdated Firmware: If the firmware has not been updated in a long period of time, the HDMI not working issue is likely to reoccur again. In order to avoid this type of issue, you must first upgrade the firmware on your device.

Methods to Fix Samsung TV Not Recognizing HDMI Signal

To troubleshoot HDMI not recognizing the HDMI signal on the Samsung TV, follow the steps outlined below:

Method 1: Check External Device

To begin, you should determine whether or not the external device is operational. Easily inspect the external device by removing it from the case. Generally speaking, if the power indicator light is yellow, the external device is operational. The power indication light on the majority of smart hubs is white in color. Check to see if the light is working properly. After that, double-check that all of the connections and wires are correctly linked before proceeding.

In addition, you might check to see if the cords are properly secured. After removing and re-inserting the port from the smart hub and smart TV, the problem was resolved. More information may be found at: The problem with the Samsung Smart TV’s web browser has been resolved.

Method 2: Power Management

In the event that the light is flashing and the external device or the television is shutting off on its own. It’s possible that there’s a problem with power supply. In order for the gadgets to be able to boot, the appropriate quantity of electricity is necessary. Because of the low voltage or power supply, the signal is interfering with other signals and becoming distorted. Devices that operate on a low power supply, on the other hand, can pose a variety of problems. In order to avert additional harm.

In order to verify the voltage, you can use a Voltmeter.

Once the gadget has been installed, you may begin using it.

  1. After that, unplug the device from the power source and wait for 15 seconds. Reconnect the device to the power supply and then turn on the device again. Connect the HDMI cable at this point. Check to see if the mistake is still present.

Method 3: Verify the HDMI Cable

The HDMI cable is in charge of transmitting the signal from the source to the television. Aside from that, the HDMI cable may also be considered the input line to the smart TV. It is possible that the broken HDMI cables are to blame for the Samsung TV not detecting the input. Using a multimeter, you can determine the condition of the cable. Connect the probes of the multimeter to the pins and jiggle the wire at the breakpoint to do this. If the resistance reading on the multimeter is 0 or infinite when wriggling the wire, the wire is faulty.

In the event of a broken cable, we recommend replacing it with a new one in order to avoid input sources not being recognized by the television.

Continue reading:Fixed: Samsung TV Standby Light Flashing

Method 4: Update your Smart TV

If the troubleshooting methods described above are unsuccessful, it is possible that the firmware is the source of the problem. However, it is possible that changing the firmware would address the problem. To do so, go to SettingsSupportSoftware UpdateUpdate Now and click on it. Following that, the process of updating will begin. Once the update is complete, double-check that all of the information entered during the smart tv setup is valid. After that, check to see if the HDMI input is being received by the television.

You might be interested:  How To Do Split Screen On Samsung

Method 5: Factory Reset Smart Hub

It is possible that the external gadget will not operate properly. This type of problem, on the other hand, is readily resolved by factory resetting the smart hub device. Resetting clears out any further user data, and the smart hub is returned to its original settings. If your Samsung TV does not detect the HDMI input, we recommend that you conduct a factory reset. To accomplish this, use theSettingsGeneralReset program. Enter the thereset pini.e0.0.0.0 and then click on the confirm thereset button.

Method 6: Contact for Customer Support

If you have used all of the techniques available to you.

Unfortunately, none of them are actively engaged in the effort to resolve the problem. You may make a repair request by visiting the customer service center.

Final Thoughts

Samsung TV not detecting HDMI input is a common problem that occurs when an HDMI cable is broken or when the input source is wrong. However, by simply changing the cable with a new one and adjusting the HDMI input, this problem may be resolved quickly and easily. If the voltage is too low or too high, the power supply control tool can be used to provide a more balanced power source. For example, if the problem still continues, please contact us. Then resetting the TV and changing the firmware will assist to avoid the problem from occurring.

FAQ on HDMI Input Not Recognized by Samsung TV

1. What are HDMI ports, and how do they work? Ans: HDMI is an acronym that stands for high definition media interface, which not only connects extra media devices such as smart hubs and set-up boxes, but also transmits high definition video. In addition, it is in charge of the distribution of audio and video information on the internet. 2. Do HDMI ports function as both input and output ports? Ans: A single HDMI port on a Samsung Smart TV may be used to transfer both input and output signals.

  • 3.
  • In response to your question, the display port is solely capable of sending video.
  • Fourth, how many HDMI ports does my Samsung television have?
  • For example, the kind of HDMI port is stated on the HDMI port located on the back of the television set.
  • Are all HDMI ports capable of supporting 4K?

Which HDMI Ports to Use for 4K Samsung TV

Although all of the HDMI ports on a Samsung UHD TV appear to be the same, this does not imply that all of their functions are the same as one another. As a result, many customers are confused about which HDMI ports to utilize with their Samsung 4K television. A source has informed me that the HDMI 1 port is required in order to get 4K video quality at 60Hz refresh rate with HDR support. Other HDMI ports can also play 4K material, although they do not support the complete range of resolutions.

In this essay, I have discussed the meanings of the port names that you may have encountered (STB, eARC, DVI, MHL).

Which HDMI Ports to Use for 4K Samsung TV

Prior to introducing the application, let me to explain what the port labels are meant to represent before I begin. Consider looking at the video formats supported by HDMI versions starting with 1.0 and progressing to 2.0 and beyond.

Resolution HDMI Versions
720p versions 1.0 (for some frequencies), 1.1, 1.2, 1.2a, 1.3, 1.4b, 2.0, 2.0b, 2.1
1080p 1.2 (for some frequencies), 1.2a (for some frequencies), 1.3 (for some frequencies), 1.4b (for some frequencies), 2.0, 2.0b, 2.1
1440p 1.2 (for some frequencies), 1.2a (for some frequencies), 1.3 (for some frequencies), 1.4b (for some frequencies), 2.0 (for some frequencies), 2.0b (for some frequencies), 2.1
4K 1.3 (for some frequencies), 1.4b (for some frequencies), 2.0 (for some frequencies, 2.0b (for some frequencies), 2.1
8K Version 2.1.

What the Labels on Your TV’s HDMI Ports Mean

The HDMI ports on the Samsung televisions do almost the same functions. In many cases, you will encounter 4k HDMI ports on Samsung TVs that are color branded, which normally does not distinguish the ports even somewhat from one another. Numbered labels, such as HDMI 1, HDMI 2, HDMI 3, and so on, are similar to this. However, markings such as HDMI (STB), HDMI (eARC), HDMI (DVI), HDMI (MHL), and most critically HDMI (HDCP), among others, indicate that the device is capable of supporting a variety of external media.

  • It makes it possible to use a number of specific functions that are included with the set-top box.
  • Additionally, you may see eARC, which is the next generation of the same technology from time to time.
  • The fundamental distinction between a standard HDMI connector and one that supports ARC is found on the receiver’s side.
  • The acronym DVI stands for Digital Video Input.
  • Consequently, analog audio input may be accepted and synchronized with the visual output.
  • An HDMI connector on the TV allows you to connect a mobile device that is compatible with the system.
  • While an HDCP connection is established between your 4K TV and any other device, all other external connections are banned from being used.
  • Further to this, the HDMI ports on the Samsung 4k TV are often labeled with the words ‘good’, “better” or “best.” This differentiation is devoid of any specific importance and is ambiguous at best.

Not to mention, in the event of any ambiguity, consult your television’s user manual for assistance. A booklet or brochure that offers product information that is included with your television when you purchase it when you buy it.

Which HDMI Port to Use on Samsung TV 4K?

Let me start by explaining what the HDMI (STB) port is all about. Those who prefer to watch cable television over other forms of media should make use of this or the HDMI 1 port. The primary benefit is that you may avoid having to go through the port selection process every time you want to watch the news or whatever else on your cable television connection. Now, using the HDMI (ARC/eARC) connector is only necessary if you are connecting an external soundbar to your computer. Those who have set up a home cinema system should keep this in mind.

  1. Any standard HDMI cable will suffice for this purpose.
  2. Take, for example, the scenario in which some of you have a very old desktop computer and are considering connecting it to your television.
  3. There are very few instances in which both HDMI (MHL) and DVI connections are used.
  4. Smart mirroring and other software make it possible to do it via the internet or a local area network.
  5. An error message may appear if the Samsung TV is unable to identify HDCP 2.2.
  6. As a result, you must realize that there is nothing quite like the greatest HDMI port on a Samsung television.
  7. Before I go on to the next issue, I’d want to clear up some misconceptions.
  8. According to an unofficial source, all Samsung Smart TVs are equipped with four HDMI inputs.

What Does the HDMI Connector Look Like?

An HDMI connection has a similar appearance to a standard USB port. It is, on the other hand, significantly higher and broader than a USB port. Because HDMI cables have two ends, each connector is intended to take just one end of the cable, despite the fact that the cables arrive with two ends. The connections for your Samsung UHD 4K TV may be found on the back of the television set. In most cases, more than one connection can be found in a line, either in a parallel or horizontal configuration.

This means that any device, regardless of how it is labeled, can be connected to these input ports.

This information may be used to change the names of the ports to anything you choose.

Frequently Asked Quesitions (FAQs):

No, some of the most recent TVs that support 4K and Ultra HD (also known as UHD) from some manufacturers are not 4K compatible with all HDMI connectors.

Do I need a special HDMI for 4k?

It is dependent on the HDMI cable because HDMI cables are suitable with the full 4K resolution starting with HDMI version 1.4. As a result, any version subsequent to 1.4 is compatible with 4K devices (except certain frequencies).

Can you use 8k HDMI on 4k TV?

Yes, HDMI 2.1 is required for 8K quality, and it is also compatible with a 4K TV, which is a good thing.

How do I know if my HDMI cable is 4k?

The presence of the HDMI High-Speed Logo on the cable’s packaging might help you determine whether your HDMI cable is capable of supporting 4K video.

Does HDMI 2.0 support Dolby Atmos?

No, HDMI 2.0 does not support Dolby Atmos audio at this time.


By now, you should have a rough understanding of which HDMI ports to utilize with your 4k Samsung TV, as well as the many types and applications of HDMI cables that you may use with your TV and external devices. Keep in mind that 4K will only function if both the external device and the television are capable of supporting 4K and HDR. Furthermore, extreme caution should be exercised while employing HDCP, as it is more sophisticated and perplexing. Finally, whenever you are unsure about a port or what it does, always refer to the instruction booklet that came with your Samsung 4K.

  • Know how affordable the best 4K HDMI cables are by looking at their prices. Best 4K HDMI Switch
  • Which HDMI Port to Use for 4K VIZIO
  • How to Choose the Best 4K Hdmi Switch To Determine If Your HDMI Cable Is 4K, Follow These Steps: Know the specifics
  • Is it possible to use a 4K HDMI cable with a non-4K television?

7 Way to Fix HDMI Ports not Working on Samsung TV 2022

The HDMI ports on the Samsung TV are not working: When it comes to home entertainment systems, HDMI is one of the most significant components. This cable is required for connecting to Samsung TVs, video projectors, gaming consoles, streaming devices, and set-top boxes, among other things. Any external media player, such as set-top boxes, Xboxes, desktop PCs, and PlayStations, should be visible on your Samsung TV while connected to the Internet. If this does not occur, an error message such as “no signal” will be shown on the Samsung TV HDMI port.

In most circumstances, Samsung TVs will not detect HDMI cables, even after they have been correctly connected, if the HDMI cable is broken or if the input resolution is not suitable with the specifications of your Samsung TV.

A number of other considerations must be taken into account.

Continue reading to discover more about this problem, as well as a step-by-step instruction on how to resolve it.

Why are HDMI Ports not Working on Samsung TV?

Any of the following factors might be to blame for your Samsung TV’s HDMI ports not functioning properly:

  • Your television is set to input mode, and there are no devices attached. There has been a power outage or a source that has been disconnected
  • There is a loose connection on both ends of the HDMI cable
  • This is a common problem. The resolution of your Samsung TV is not the same as the resolution of your source
  • According to the evidence, your HDMI cable has been damaged.

The failure to get an HDMI signal on your Samsung TV might potentially be caused by the way your device is turned on. Take a look at: How to Resolve the Samsung TV Error “Mode Not Supported” The instructions below will assist you in troubleshooting the “HDMI no signal” problem on your Samsung television:

Solution 1: Use a different HDMI cable

It’s possible that your television is incompatible with the cable you’re using. It is also possible that you may be unable to connect if the HDMI cable is broken. When connecting your Xbox, PlayStation, or Roku to your Samsung TV or any other device, you should try using a different HDMI cable to see if it helps. If it looks that the cable is the source of the problem, you might want to try replacing it.

Due to its braided construction, high-speed cables such as the iVanky braided cable are suited for streaming high-definition material without lagging, and the fact that the cable is braided reduces the danger of damage.

Solution 2: Be sure the connected device is turned on.

After 2017, Samsung TVs should be able to automatically recognize devices connected through the HDMI port. In that situation, it would be necessary to disconnect the linked device from the computer.

  • Turn off any external devices
  • Wait around ten seconds
  • sTurn it back on again

If you utilize your television, you may be able to solve the problem. Must Read – How to Resolve HBO Max Not Working on a Samsung Smart Television

Solution 3: Connect the HDMI cable again

It is possible that the HDMI cable came out loose or that you did not connect it correctly. Disconnect the HDMI cable from the back of your television and the source. If your Samsung TV does not identify the HDMI signal coming from your computer, you can repeat the procedure as described above. When you’re finished, you can:

  • Please make certain that the HDMI cable is securely connected to your external device or computer
  • After that, connect your television to it.

If it doesn’t work, try connecting the cable to a different port on your computer. To complete Step 4 of the process outlined below, you will need to pick the new source on your television.

Solution 4: Select the Correct input Source

Using your Samsung TV to watch an external device, you must first pick the same source on the TV as the device that has been linked to it on the TV. As an alternative, if your console is linked to the HDMI 1 port on your television, you will need to choose HDMI 1 as the source on the television. In the event of a TV that does not show any signal when an HDMI cable is attached, it is possible that you have mistaken the ports.

Solution 5: Power-cycle the external device

By power cycling the external device or input source, you will be able to refresh the system and allow it to begin anew.

  • Remove the device from the wall or from the power strip, if applicable. Please be patient for around 60 seconds. Reconnect the source input once again.

Please switch on the power source once more. To power cycle your television, follow the procedures outlined above. It will assist you in resetting your television. Check see this article:Samsung TV Error Codes

Solution 6: Check for software updates

Handshake problems with HDMI may occasionally be remedied by upgrading the input software on the computer. If you notice a loss of HDMI signal on your Samsung TV, you must perform this procedure. What you’ll have to do is the following:

  • Open the Settings menu and select Support. Then click on the Software Update button and then on the Update Now button.

It is also possible to enable automatic updating by selecting the appropriate option.

  • Select Software Update from the drop-down menu under Settings > Support > Software Update. Select Auto Update from the drop-down menu and turn it on.

On your television, you will receive an automatic update. After you’ve completed this step, check to see if the external input is functional. Although it is critical to keep your Samsung TV software up to date, several consumers have reported experiencing difficulties after upgrading their firmware. More information can be obtained by contacting the maker of your television.

You might be interested:  How Much Is The Newest Samsung Phone

Solution 7: Factory reset your Samsung TV

You will have the ability to start over from the beginning. The settings will be erased, and you will have to re-enter them for the HDMI inputs. After you’ve completed these steps, you’ll be able to

  • Select Settings from the drop-down menu. Go to the General drop-down menu
  • Select Reset from the drop-down menu. Please enter your PIN or 0000 as appropriate. You will finish the reset by hitting OK once you have selected Reset.

The option to Reset will also be accessible in the SettingsSupportSelf Diagnosis menu item.

Wrapping Up…

In the event that your Samsung TV will not transition to HDMI when you connect an external device, you should attempt diagnosing the problem. The first thing you should do is double-check that you are utilizing the right input source. Additionally, make certain that the HDMI cable is securely fastened at both ends of the connection.

Perhaps trying another cable or reversing the order in which your inputs are activated can help you figure out what is wrong. Check it out by clicking here. How to resolve the Samsung TV Network Error Code 012 problem

People also ask

If the HDMI cable is broken or if your input resolution is insufficient for your Samsung TV, your Samsung TV will not detect the HDMI cable, even if it has been correctly connected to the television. Use a different device or a different HDMI cable to identify the specific problem in order to narrow down the cause.

Q.2 Why does my TV say no signal when HDMI is plugged in?

Check to see that the source device is powered on and operational. When using an HDMI® cable to connect a source device to a television, make sure both the source device and the television are turned on before disconnecting and reconnecting the HDMI cable from one of the devices. Alternatively, if the HDMI cable is not working, try a different one.

Q.3 How do you fix a loose HDMI port on a Samsung TV?

How to Repair a Loose HDMI Port The rear panel of the HDMI-equipped device should be facing you in order to resolve this issue1. 2. Locate the HDMI port on your computer. If the HDMI cable is still connected, it should be disconnected. 3) A little Phillips screw is located below or above the opening on the right side. The screw should be tightened in a clockwise motion using a Phillips-headed screwdriver.

Q.4 Why are my HDMI ports not working?

Your television is set to an input that does not have any devices attached to it. There has been a power outage or a source that has been disconnected. Both ends of the HDMI cable have a sloppy connection, which is causing the problem. The resolution of your Samsung TV is not the same as the resolution of your source. According to the evidence, your HDMI cable has been damaged.

Q.5 How do I fix HDMI no signal?

1. Disconnect any televisions and monitors from their HDMI connectors. 2.Turn off the television or computer monitor for approximately 10 minutes. 3.Reconnect the power line from the TV or monitor to the wall outlet. 4) Connect a single device to a single HDMI port on your computer. 5) You must switch on your smartphone before you can continue. Sixth, the previous steps 4-5 must be completed for each HDMI device and port.

Samsung TV No Signal From HDMI Ports:10 Easy Fixes – THE CONCH TECH

The term Samsung normally comes to mind when we think about electrical appliances, and it is one of the first brands that comes to mind. However, this is not by chance; rather, their performance comes first, followed by their reputation. This is one of the reasons why their televisions have been at the forefront of technology for decades. How can I resolve the Samsung TV not receiving a signal from the HDMI ports problem? High-quality 4K HDMI cables should be used. Reset your HDMI ports as well as your television.

  1. Remove the power from all of the devices that are connected to your TV through an HDMI wire. Unplug all of your HDMI wires from your television
  2. 2. Turn off your television
  3. For 10 minutes, unplug it from the electrical outlet. Press and hold the power button on the television for approximately 30 seconds
  4. Reconnect all of the HDMI cords to the television
  5. Reconnect your television and any other connected devices.

However, because they are electrical devices, they are also subject to failure, and a problem may occur after a length of time has passed. One example of this is when the HDMI ports display a signal failure. However, be assured that if the problem is accurately detected, it is a perfectly fixable problem that may be resolved by following the methods outlined below. Right now, you may look at the list of the best streaming devices on Amazon.

Why Does Samsung TV Say No Signal When HDMI Is Plugged In?

Before we can dig deeper into the problem, we must first identify what is causing it in the first place.

If your TV does not show any signal when the HDMI cable is plugged in, there might be a number of reasons for this. Sometimes we miss the more obvious sources of the problem and conclude that the problem is intractable.

  1. The HDMI cable is not properly attached or is broken. One possibility is that the HDMI cable is not properly attached to the port or that it is loose in the port. It is possible that the cable is no longer working and that you will require a new one
  2. HDMI port is clogged. It is possible that the port or the HDMI cable is blocked with dust or other tiny particles, causing the connection to be impaired
  3. Alternatively, the source device may be broken. It is also possible that the source device is malfunctioning, thus it is necessary to attempt a variety of alternatives in order to determine the root cause of the problem. The port has become unusable. If none of these are the causes of your TV’s inability to receive signals, it is possible that there is a technical problem with the port, which may necessitate the need to visit an expert.

How To Fix Samsung TV When It Says No Signal HDMI?

A list of steps might be used to explain this procedure. Despite the fact that resolving the most obvious problems is rather simple, it is still necessary to investigate the problem in depth by attempting all conceivable solutions to the problem.

1. Reset the HDMI Ports

First and foremost, let’s perform a standard reset to begin our troubleshooting process. Take the following steps:

  1. Remove the power from all of the devices that are connected to your TV through an HDMI wire. Unplug all of your HDMI wires from your television
  2. 2. Turn off your television
  3. For 10 minutes, unplug it from the electrical outlet. Press and hold the power button on the television for approximately 30 seconds
  4. Reconnect all of the HDMI cords to the television
  5. Reconnect your television and any other connected devices.

2. Factory Reset Your TV

This is generally one of the final things we recommend trying out before moving on to the next step. However, in this particular instance, factory resetting has shown to be rather successful. Keep in mind that if you choose to use this last resort option, you will lose all of your previously saved data.

  1. Go to the Settings menu. Select the General option. Select Reset and enter your PIN (0000 is the default)
  2. Then press OK. Select Reset from the drop-down menu. To complete the reset, press the OK button. Your television will automatically resume

Another approach that is more effective at addressing the HDMI-related difficulties is as follows:

  1. For 10 minutes, turn off the television and disconnect it from the wall. Ensure that all of your external gadgets and wires are disconnected. Press Mute, 1, 8, 2, or 3 to stop the music. Activate the remote controls one by one in that order (or press and hold the exit button for 30 seconds)
  2. The television will power on and display the Factory Reset screen. Choosing “Option” and then selecting “Factory Reset” causes the television to automatically turn itself off. “Power” was pressed
  3. Television will begin playing with the original setup menu
  4. Connect each of the devices and the HDMI ports one by one.

One more suggestion: Connecting only one HDMI cable/device at a time may also be beneficial in obtaining a signal.

3. Check For Software Updates

If this does not resolve your difficulties, you should attempt to update the software on your Samsung TV from the main menu.

  1. Go to Settings, then Support, then Software Update, then Update Now
  2. Then press Enter.

4. Check Your HDMI Cable

Check to ensure that the HDMI cable is connected to the right input and that the source device is turned on. Check the cable and port as well to ensure there is no dust in them and that nothing appears to be broken or bent excessively.

5. Check the Source

Choose the appropriate source on your TV for the associated HDMI port by pressing the corresponding button on the remote. When you plug the cable into HDMI 1, for example, you should pick that option on your television.

6. Check your Connected Device

Check to be that the linked gadget you’re using is indeed switched on before continuing. If your external device does not switch on, you will need to contact the manufacturer of the item to resolve the problem. Also, if you have a habit of turning on your TV first and then your external gadgets, experiment with switching the order. First, turn on your external device, and then turn on your television. It’s possible that this will make all the difference.

7. Try Unplugging the Cable

Remove the HDMI cable from both devices and re-connect it to the computer. Pull it out of both devices with force, and then connect it into the source device first, followed by the TV. If this does not work, try putting the cable into a different port on the TV and selecting the relevant channel on the TV. If this works, it is possible that your original port has a problem that requires expert troubleshooting. If this is the case, proceed with the other procedures mentioned below.

8. Use a Different HDMI Cable

Attempt to use a different HDMI cable from the one that was previously used. Make certain that you are using a high-quality 4KHDMI cable. If you try a different cable, you will be able to determine if the problem is with the cable or with the television. Recommendation: If you are still using an outdated HDMI cable from your prior TV, it is likely that you will need to switch to a 4K HDMI cable.

9. Try a Different Source Device

Try using an alternative source device that is capable of being connected to the TV via the HDMI port.

Connect the cable to the same ports over and over again to establish where the problem is coming from. If another device is connected to the TV, try changing the ports on that device or using its cable to track down the source of the problem.

  • A issue with the original source device exists if the new device works in a different port than the original source device. This means that if the original port is not working, but the second device is operating in a different port, there is something wrong with the original port. However, if the new HDMI cable works in the original port, it means that the original HDMI cable has to be replaced. If all of the cables and ports are operational, it is possible that there is a problem with the source device.

10. Talk to Professionals

If none of the above methods work, visit a professional or Samsung directly for advice on how to repair the TV or the source device where the problem was discovered. They might either make a service appointment or fix any items that were experiencing technical difficulties.

How To Fix Samsung TV When It Says No Signal?

Due to the fact that they are closely connected and frequently have the same origin, you can utilize any of the methods that we have previously mentioned in this article, as well as the following additional suggestions.

Change the Channel

Start with the simplest method, which is to just change the channel to check whether the remainder of the options are available.

Reset your Samsung TV

By removing your device from the power source for 60 seconds and then connecting it back in, you can reset your device. Regardless of how tempting it may seem, you must wait the whole duration for the system to completely reset. Once this is completed, turn on the television and select the appropriate HDMI channel. This may be determined by glancing at the HDMI port, which indicates which channel it is using, and then locating it using the Source button on the remote control. In most cases, this resolves the problem, and you may not need to proceed with the next options in this section.

Reception Problem

It is possible that there is a problem with the reception from the antenna or the connection to the TV (if one TV works in the household while the other does not, your TV may need to be repaired). If you are experiencing reception problems, you should first determine whether the source, such as a satellite dish, is properly positioned. High gusts, passing objects, and obstructions in movement all have the potential to knock them off their feet. Furthermore, the cables are susceptible to damage as a result of natural wear and tear as well as adverse weather conditions such as rain, snow, and humidity.

Check the Input Settings

Using the remote control, you may also check the input settings on the television set. Check to ensure that the cable is connected to the right port on the computer.

How To Reset the HDMI Port On Samsung TV?

The HDMI port may be reset in the same way that a no signal issue can be resolved.

  1. Disconnect all HDMI inputs and disconnect the TV from the power source for 10 minutes to allow the TV to cool down. To begin, reconnect the Samsung TV and then connect each HDMI device one at a time. Check to determine if the gadget is operational by turning it on. Steps 2 through 4 should be repeated for each device.

Right now, you may look at the list of the best streaming devices on Amazon.


These procedures are generally applicable to all Samsung TV sets and are usually sufficient in terms of repairing them. Waiting for a repair personnel to arrive at your location each time may be a time-consuming and ineffective approach to resolve your issues. Knowing how to use such simple strategies is beneficial in fixing the problem as quickly as possible. As a result, keep this knowledge somewhere safe so that the next time a similar circumstance comes, you may be the first response to demonstrate your abilities to the audience.

My name is James, and I work as an administrator and contributor to this blog on a regular basis.

Due to the fact that I am a techno-geek, this blog will serve as a platform for me to share all of my knowledge with you in order to make your life a little bit simpler when it comes to dealing with technology.

Leave a Reply

Your email address will not be published. Required fields are marked *