- 1 Samsung Front Load Washing Machine Error Code dE – How To Clear
- 2 A Samsung Washing Machine’s DE Error
- 3 Error Code Identification
- 4 Laundry Cycles
- 5 Lid Check
- 6 Adjusting Parts
- 7 Samsung washing machine error codes
- 8 How to fix DC and dE error on Samsung washing machine
- 9 What does de error mean on Samsung washing machine
- 10 Samsung Washer DE Error Code [FIXED] – KCSCFM Repair
- 11 What Does The Samsung Washer DE Error CodeMean?
- 12 How To Fix Samsung Washer DE Error Code
- 13 The most common failures of Samsung washing machines – Coolblue
- 14 Samsung malfunction 1E or 1C
- 15 Samsung malfunction 3E or 3C
- 16 Samsung malfunction 4E or 4C
- 17 Samsung malfunction 5E, 5C or E2
- 18 Samsung malfunction HE, HC or CE
- 19 Samsung malfunction UE, E4 or Ub
- 20 Other malfunctions
- 21 Didn’t fix the problem?
- 22 Did this help you?
- 23 Samsung DE Error explained
- 24 Buy Spares
- 25 Reader Interactions
- 26 Samsung Washing Machine Error Codes – Glotech Repairs
- 27 Samsung washing machine DC error: How to easily fix the different DC error codes?
- 28 Samsung washing machine DC error is quite common and it is likely that you may come across this error. Read on to learn how you can fix the different DC errors.
- 29 Samsung washing machine DC error
- 30 DC error in Samsung washing machine – Different errors
- 31 Samsung washing machine DC error fix
- 32 What does tE mean on a Samsung washer?
- 33 All Samsung Washing Machine Error Codes
- 34 list of error codes for Samsung washing machine.
- 34.1 Samsung Washing Machine Error Code sLO,dS, d5, FL, LO, L0, dE, dE1, dE2, dc, dL, 1 dC, 1dC4, 1dC1
- 34.2 Samsung Washing Machine Error Code snF, 4C, 4E, 1 4C–
- 34.3 Samsung Washing Machine Error Codes1E, LE, 1C, LC, LC1, 1 1C, 1 LC–
- 34.4 Samsung Washing Machine Error CodesOE, 0E, OC, 0C, 1 OC, 1 0C–
- 34.5 Samsung Washing Machine Error CodesSUd, 5UD, Sd, 5d, SUdS, 5Ud5–Excessive sudsin the machine.
- 34.6 Samsung Washing Machine Error CodesUb, U6, Ur, UE, 1 Ub, 1U6– Unbalanced Load.
- 35 Samsung front-load washer dc error code
- 36 Balance the load
- 37 Level the legs
- 38 Check for a broken part
- 39 What Does That Flashing Number Mean on My Samsung Front-Load Washer?
- 40 Samsung Front-Load Washer Fault Codes
Samsung Front Load Washing Machine Error Code dE – How To Clear
What exactly does the letter de indicate on a Samsung washer? There might be a number of potential reasons why the dE error code appears on your washing machine’s display screen. Do you have an E error code on your Samsung washer? The dE error number shown on the Samsung washing machine’s display indicates that theDOOR IS NOT PROPERLY LOCKED OR CLOSEDissue has occurred. If the washer door is not closed properly, a blocked or incorrectly-positioned drain hose may be the source of the problem, and it may not be submerged in water as a result.
All of these difficulties might lead to the appearance of the error number dE on your Samsung washer.
dE is the error code for a Samsung front-loading washing machine.
What is the significance of the DE Error number that appears on the screen of my Samsung Washing Machine?
- WASHING MACHINE ERROR CODE DEFAULT LOCK OR CLOSURE: The washing door has not been properly locked or closed.
- It is also possible to determine whether or not the drain hose holder in the rear of the washer is correctly positioned.
- The following is a more detailed explanation of how to resolve the Samsung dE Error Code:DE ERROR CODE THE DEFINITION OF A SAMSUNG WASHING MACHINE: Unlocking the door failed.
- DE ERROR CODE SAMSUNG WASHING MACHINE TO FIX THE DE ERROR CODE, DO THE FOLLOWING: -First, unplug the washing machine and then open the door of the machine.
- NOTICE: Forcing the washing door open might cause damage to the door lock and switch mechanism, which must be replaced.
- Samsung Washing Machine Door Locks If replacing the Door Lock and Switch Assembly does not resolve the problem, it is possible that the Main Electronic Control Board will need to be replaced.
- Having problems with your Samsung washing machine because of the dE error code?
As the author and developer of this website, Allen works as a Home Maintenance and Appliance Technician. He has 33 years of expertise troubleshooting and repairing a wide range of household appliances and electronic devices. Please get in touch with us here.
A Samsung Washing Machine’s DE Error
Top-loading washers from Samsung are equipped with a lid sensor that regulates the spin and rinse processes, preventing the lid from opening during these cycles. It is possible that the sensor may become worn out over time, or that the lid magnet will become misaligned. When this occurs, the “dE” error code will appear on the washer’s LCD screen, and you will need to resolve the issue in order for the washer to function properly again.
Error Code Identification
When the mistake occurs, the letters “dE” will show on the LCD screen of the washer. Be warned that this code might be easily mistaken with other codes such as “d8,” “8f,” or “d3,” all of which are entirely different. After you’ve confirmed that you have a “dE” code, hold down the “Stop” button for 30 seconds to delete the code from the computer screen.
The “dE” error code on your Samsung washer usually appears shortly after the rinse cycle has finished. As a result, your machine will be loaded with water since it will not drain because the washer will believe that the lid is opened. Restart the cycle to ensure that the water is thoroughly drained, and then turn it off before it fills up again.
Check to see if there is anything blocking the lid switch from allowing the cycle to continue. It’s possible that debris, such as lint or paper, fell into the switch hole during the installation. Rust or a foreign item might potentially cause the hinges on the back of the lid to become jammed. If there is anything on the washer that might be interfering with the lid switch, remove it and try running the cycle again.
Samsung washers are equipped with a tiny magnet that helps to keep the lid securely closed. Adjust and test the magnet with the help of a screwdriver. Remove the magnet from the washer casing and realign it with the appropriate component on the casing. Gently seal the lid when it has been snugged up and observe where the magnet makes contact. If the cycle does not work the second time, contact Samsung customer care to have a new washer lid switch shipped out to you.
Samsung washing machine error codes
|1E, E7, 1C||Water Levelsensor||Water level sensor faultIncorrect connections of the water level sensor terminalThe hose part for the water level sensor is foldedThe hose is clogged with foreign material||Check the water level sensor terminal connections and contactsCheck the material code to ensure correct water level sensor is usedIf the water level sensor is faulty, replace it|
|4E, E1, 4C||Water Supply||Water supply valve is blocked by foreign materialThe water supply valve terminal is not connectedThe warm water and rinse connectors are wrongly connected to each otherPCB terminal from the drain hose to the detergent drawer is not connectedHose is folded or torn||If the water supply valve has a wire disconnected, replace itCheck whether the water supply valve is clogged with foreign material and whether water is supplied continuallyIf the PBA relay operates abnormally, replace the PBA|
|5E, E2, 5C||Drain||Drain pump faultForeign materials in the drain pumpMain PCB fault||Check whether the drain pump motor are restrained by foreign materialCheck whether the connections are correct and if there is any wires disconnectedCheck whether the drain pump operates abnormally when the water temperature in the tub is high|
|CC||Cooling||Washing Temperature sensor faultDescription of PL hazard prevention||This error occurs if the water Temperature is more than 50˚C in draining. Check the temperature.If the water temperature is normal, this error is due to a temperature sensor fault. In this casem replace the washing heater and be careful to prevent water leakage|
|dE, dE1, Ed, dC, DC1, DC||Door||Door switch faultMain PCB fault||Close the door if it is openedMake sure that laundry is not caught in the doorCheck the door switch. If faulty, replace itCheck the main PBA door sensing circuit. If faulty, replace itCheck the drain Pump wire connection|
|LE, LE1, E9, 11E, LC, LC1||Water Leakage||Check for any leakage.Foreign material in the DV caseFault of a hose or incorrect part engagement in the product||Check for any leakage on the base, Hose, Valve and Tub connectionsCheck the drain motor operation. Replace if it does not operate normally|
|Sud||FoamingDetected||Too much foaming||It is also displayed while foaming is removed.- When the removal is finished, the normal cycle proceeds. “Sud” or “SUdS” is displayed when too much foaming is detected and “End” is displayed when the removal of the foaming is finished. (This is one of the normal operations. It is an operation for preventing non-sensing faults.)|
|UE, E4, UB||Unbalance||Caused by the laundry||Check the type of laundryThe laundry load is unbalancedRedistribute the load. Washing items such as blanket, pillow or a large towel can cause weight shift during the spin cycle|
|5E, E2, 5C||Drain Error||The pump motor impeller is damaged internallyWrong voltage (220 V → 110 V) is supplied to the partsPart faultThe drain hose is clogged with foreign materialWater pump terminal is not connected||Clean the debris filterMake sure the drainage hose is connected properlyClean the water hose mesh filter|
|NF||No Fill||Washer is not plugged in and powered onDebris filter is cloggedWatter hose is clogged||Ensure that the door is tightly closed.Ensure the washer is plugged in and powered on. If it does not power on, check the fuse and/or reset the circuit breaker (in the home’s electrical panel).Make sure the source water tap is completely turned on.Check the water pressure.Check that there are no kinks in the water hose connected to the washing machine and that it is not clogged.Clean the mesh filters of water hose.|
How to fix DC and dE error on Samsung washing machine
A Samsung washing machine may display the word dE, which stands for Door Error, at any time. Samsung’s washing machine panel screens frequently display the dE symbol, which may be confusing to those of us who have never ran or paid close attention. However, the notice will only display when the washing machine door is opened, and the system will generate a DE — Door Error — error code when this occurs. The error notice indicates that the washing machine door has not been closed properly, and the washing machine will halt for a short period of time until the door is closed properly once again.
Perhaps in the morning, the Samsung washing machine flashes the dE symbol to alert the user.
Relax, the machine is not acting erratically or malfunctioning.
Is there anything wrong with the Samsung washing machine’s components?
Samsung washing machines may be repaired by us. It looks that Samsung washer has received an E error code. If you have another problem with your Samsung washing machine, you should also read about how to solve the 4e error. How to resolve the dE error
What does de error mean on Samsung washing machine
The most typical reason for a dE notice to occur is because the door switch is malfunctioning; in most cases, the switch is pushed into the On position. When it comes into contact with a switch, it is signaling to the system that the door is firmly closed and that the machine is ready to operate. It’s possible that the copper plate-shaped switch for the door’s safety is weak, because one day there was no touch even though the washing machine door was closed, and this was discovered. In this location, the dE message is displayed and will continue to display.
How to fix DC and dE error message on Samsung washing machine
I have a little expertise with repairing the error code on a Samsung toploader washing machine, as well as probable difficulties with the washing machine door switch part of the washing machine. Repairing wear components is a simple process.
- Before you open the panel behind the washing machine, unplug the electricity and the washing machine’s power cords. Open the lid on the side of the washing machine that is closest to the door hinge. When the washing machine door is opened and closed, you may notice a switch that goes up and down. Check the copper plate contact part of the safety switch system if it appears that there is no contact, such as when the switch is weak. In order to close the washing machine door, press the switch plate in the closed position. After pressing the button, repeat the test to see if the dE message is still displayed. If it continues to appear, press the button once more to allow the brass plate that serves as a switch to make contact. When the washing machine is operating normally, close the pan correctly once more. And the washing machine will be able to resume operations
It is possible to resolve the DC Error code that is generated when the dryer is operated with the door open by doing the following steps:
- Check to see that the door is properly closed
- Check to see that the laundry is not trapped in the door
This is a regular occurrence in the modern era of Samsung washing machines. If we want to repair the Samsung washing machine ourselves, we don’t need to call in an expert to fix the DC and dE problems that we encountered. This is due to the fact that the switch problem is the most prevalent and may still be resolved by pushing the plate to make the contact come back into contact. The meticulous method is only suggested for individuals who are familiar with the electrical system in question. Keep in mind to unplug your washing machine’s power cable before making any adjustments to it to reduce the likelihood of injury.
Samsung Washer DE Error Code [FIXED] – KCSCFM Repair
When the Samsung washing machine encounters the DE error code, it indicates that the door has not been closed or secured properly. If the door latch and lock are not functioning properly, the problem can be resolved by inspecting the door and making sure it shuts completely, as well as clearing out any debris that may have become lodged in or around the region where the door locks. Samsung washers are well-known for their high quality and dependability, but when the DE code appears, it may be quite annoying.
What Does The Samsung Washer DE Error CodeMean?
It’s possible to determine what’s wrong with your washer and dryer machines by looking at the error code they generate. In addition, Samsungwashing machines are fitted with a door switch that only activates when the door is properly closed. When it malfunctions, you’ll notice the error code “DE” displayed on the display panel of your system. A DE error number indicates that the door of your washing machine has not been closed correctly, i.e., it remains open while the washer is operating. This problem happens when the door does not latch correctly or fully, or when the door is not closed entirely throughout the wash cycle, as described above.
“DE” is an abbreviation for “door error,” and this mistake might display at the beginning of a machine’s wash cycle if you are unable to close or lock the door, and the machine refuses to move further, or at the conclusion of the cycle if the door will not open or close properly.
How To Fix Samsung Washer DE Error Code
When Samsung washers are in working order, they are the ideal washing option. You may feel frustrated when an error code displays on your computer screen, but you may quickly alleviate your emotions by following these simple steps: When running a load, make sure the door is completely closed. Clean the interior of the door and slide your load forward if there is lint or clothing trapped behind it throughout the cleaning process.
Bent Washer Door Hinge
It’s conceivable that the hinges on your Samsung washing machine are too loose or have been damaged by water and are no longer able to hold the door closed completely. Turn the two spring-loaded hinges in the opposite direction of the clock to see whether they may be released. Once you’ve tried everything else, take a screwdriver and pry up on the horizontal portion of each hinge to see if you can bend it back into place. It may be necessary to replace both hinges if nothing of the previously mentioned remedies is successful.
Door Lock Motor and Switch Assembly
When the washing door is open, Samsung’s revolutionary washer door lock stops the machine from beginning, which saves energy. This is advantageous because it eliminates the possibility of having your hands wet or coming into contact with electrical circuits during the wash cycle. A seemingly insignificant feature, yet it makes a significant impact while you’re doing the laundry. If the washer does not appear to be shutting correctly, it is possible that there is a problem with the door latch.
As one of the most critical components of your appliance, if it becomes broken, it may be extremely dangerous to you and your family’s well-being.
When troubleshooting the front lock on your Samsung washer, make sure that the door lock switch is still operational (it should be).
Broken Door Latch
If the Samsung Washer DE Error Code continues to occur even after completing the troubleshooting procedures, it is possible that the door lock has failed. If you’re having trouble closing your washing machine completely, it’s probable that you’ve encountered a latching problem. The solution is as simple as cleaning the latches to keep them from becoming unclean and wearing down more quickly; a hot soapy water and a toothbrush may be used to accomplish this. If your locks are still not functioning properly, you may require replacements, which are available for purchase online if necessary.
Problems with the Installation
The washing door might pose problems, especially if it is not placed in the proper manner. When placing a machine, make sure that the ground is neither too firm nor too soft. This will ensure that the machine is level and sturdy. Ideally, a concrete or hardwood surface would be preferred. Otherwise, the vibration from the washing cycle may cause the machine to shift slightly, interfering with the capacity of the door to close properly. When it comes to washing machine door problems, uneven terrain is the most prevalent culprit.
The washer should be set up on level ground in order to avoid it tilting or moving to one side. If the washer has already begun to lean, the most effective approach to correct the problem is to adjust the screws located beneath the machine’s feet.
The most common failures of Samsung washing machines – Coolblue
Written by Rowan at 17:48 UTC on March 31, 2021. When you turn on your Samsung washing machine, you notice an error message. In the case of a washing machine malfunction, for example, the water supply or drainage may be affected. Of course, making a mistake is quite inconvenient. Fortunately, the majority of Samsung issues can be resolved. In this post, you will learn about the most often seen error messages.
Samsung malfunction 1E or 1C
The error code 1E or 1C on your Samsung washing machine’s display means that something went wrong. If this is the case, there is an issue with the water level sensor. This indicates that the water pressure or the water level are not at the proper levels. Before anything else, make sure that the washing machine is correctly linked to the water supply system. It is possible that the supply pipe is blocked or kinked. If this is the case, the kink should be removed. It may be necessary to switch the machine off and on again from time to time.
Samsung malfunction 3E or 3C
The motor does not operate when the error message 3E or 3C is shown. As a result, check to see if the socket is operational first. Remove the plug from your washing machine once it has been turned off. Check to see whether any other devices are receiving electricity. Another possibility is that the washing drum is overflowing, which would result in the problem. If the issue warning still shows after removing some clothes from the drum, try restarting the software to see if it goes away. Does this not appear to be of assistance?
Then reconnect it and check to see whether the error code has been eliminated.
Samsung malfunction 4E or 4C
Message indicating an error The presence of 4E or 4C implies that there is an issue with the water distribution system. This indicates that either no water or too little water is entering the drum. To ensure proper operation, ensure that the water tap is fully open and that the supply hose is securely attached. Check to see if the faucet in your bathroom or kitchen is functional. If this is the case, there is insufficient water pressure and you will have to wait. Examine the supply hose to see if there is an obstruction or kink in the hose.
Samsung malfunction 5E, 5C or E2
Error codes 5E, 5C, and E2 indicate that the water cannot leave. There are a variety of factors contributing to this. It is possible that the drain is clogged or that there is a kink in the line. You may find instructions on how to unclog the drain of your washing machine in the article below. The drain filter cover is located on the front of the vehicle, at the bottom right corner. When you open this flap for cleaning, be sure to lay a towel down first just to be safe. Is your washing machine tucked away in a shed?
Samsung malfunction HE, HC or CE
The HE, HC, or CE error codes flash on the screen. If this is the case, a problem with the washing temperature sensor has occurred. When the water temperature in the drain is higher than 50 degrees Celsius, this occurs. For 30 minutes, turn off the washing machine and unplug it from the power source completely.
Check to check whether the error code is still there after reconnecting the device. It is also possible that you will receive the error codes rE1, 4E2, H1, 4C2, or E8 as a result of this problem. This varies depending on the model.
Samsung malfunction UE, E4 or Ub
It is not possible to complete the spin cycle when the error codes UE, E4 or Ub occur. It’s possible that the washing machine isn’t properly balanced. Ascertain that the washing machine is situated on a level and stable surface. It is also critical that the drum does not get overloaded. When filling the drum, there must always be enough room for one fist to fit within. Finally, check to see that the laundry has been spread equally. If so, does your laundry hang out on one side of the drum? If that’s the case, please redistribute this.
Is your washing machine emitting the codes dE, dE1, Ed, dC, DC1, or DC? Do you know what these codes mean? Otherwise, the door is still open, and you must close it before proceeding. Inspect the door to see if there is any washing in it. Does the code DDC display on your AddWash washing machine if you have one of these machines? If this is the case, you must first hit the pause button in order to access the additional AddWash door. Are there any problems with your computer that are not included in this article?
Didn’t fix the problem?
You’ve done everything you can think of, but your washing machine is still not working. If this is the case, it is possible that a technician will be required. Not every problem can be resolved in a stand-alone manner. Is your washing machine a Coolblue product, and is it protected by the manufacturer’s warranty? If this is the case, please contact our customer support. Is your washing machine no longer covered under warranty? If this is the case, contact Samsung. Coolblue was not the retailer where you purchased your washing machine.
Did this help you?
Optional We will only use your input to enhance the website, and we will not react to any of your comments. This article was written by:Rowan, a washing machine expert.
Samsung DE Error explained
The DE Error on Samsung washing machines (typically) indicates that “the door has been left open.” However, as with other error codes, you should not take this one literally because it will frequently appear even when the door is plainly closed properly. What it implies is that it believes the door is open, which is most likely due to the fact that it is not receiving power from the door lock. However, as this forum discussion illustrates, just replacing the door lock does not always correct the problem-Samsung Washing Machine-and it is not always the most cost effective solution.
- The first thing to look for is whether or not the door is shutting correctly.
- When this portion is physically pushed to one side by the door catch, the lock is activated and the door is securely locked.
- If the door latch is damaged, worn, or a spring has come loose, for example, the door lock on the inside may not be activated.
- It is possible that a door that has lowered and is no longer lined up properly due to wear at the hinge would be unable to activate the lock correctly.
- If everything appears to be in working order, you might always try spraying a little WD-40 into the door lock aperture to check if anything has been stiff.
- In addition, a poor connection or damaged wire on the door lock that supplies power, the neutral return, or electricity to the remainder of machine after it is triggered might be causing the malfunction.
It is possible that there is a defect inside the main PCB – but do not replace the PCB unless you are certain that it is a faulty component. They are quite costly, and you will not receive a refund if the repair does not correct the problem.
When the machine is plugged in, do not reach into the machine to mess with the door lock or any other part of the machine. The door lock is powered by the mains electricity.
Buy new door lock
If you do decide to purchase a new door lock, you should consider doing it through Ransom Spares – Purchase a new door lock.
Ransom Spares is a family-owned business that sells more than 1 million white goods appliance spare parts online. With over 5000 ratings on Trust Pilot, this firm is known for its friendliness and price match promise: “If you discover the exact identical item or accessory for a lower price somewhere else, we’ll not only match it, we’ll beat it!” – Purchase the spare component for your appliance.
Pass over the commentsNote: Comments frequently offer really helpful and additional information.
All comments are monitored before they are published, and they must be relevant to the topic. Please refrain from asking questions that have already been answered in the preceding article.
Samsung Washing Machine Error Codes – Glotech Repairs
|1E, E7||Water Level Sensor Issue||Please check the pressure hose system for any blockages, splits, or deterioration. If no damage is found, and the connection is ok, we recommend replacing the pressure sensor.|
|3E, 3E1, 3E2, 3E3, 3E4, EA, EB||Motor Defect||Could be an open/short circuit (please check wind resistence), a PCB fault, or a loose connector.|
|3E1||Motor Overload||Ensure there isn’t too much laundry in the appliance, the hall sensor terminal isn’t connected, or a possible PCB fault.|
|3E2||Motor Driving Error||The motor driving error from the PBA is weak, unstable relay operation. We recommend replacing the Motor PCB.|
|3E3||Quiet-Drive Motor Error||Faulty motor hall sensor, faulty PCB connection, or the Quiet Drive motor cover is out of place.|
|3E4||Quiet-Drive Motor Defect||The PCB Housing terminal is not connected, there’s a PCB fault, or the Quiet-Motor drive is faulty.|
|4E, E1||Water Supply Error (only occurs after 10 mins when the pressure sensor is not detecting the unit filling with water)||Check the water supply is turned on and has adequate water pressure (Samsung recommends minimum of 0.5bar, and a maximum of 8bar), check for any kinks in the hoses, check inlet filters inside end of Water Valve, check water valve coil resistance, should be 4~5kΩ, check hose from the drum to the sensor. If this is split or cracked it MUST be replaced.|
|4E1, 4ED||Water Temperature Issue||Check to ensure the waster hose is connected to a cold supply. It must NOT be connected to a hot supply.|
|4E2||Water Temperature Error||The water is too hot for the selected wash.|
|5E, E2||Water Drain Error (only occurs after 10 mins when water is not draining from the appliance)||Check the drain pump filter for any blockages (for e.g. coins, hair clips, lint,etc.), check the drain hose and connection for any blockages or kinks.|
|6E||Water Heater Not Functioning||Check the heater resistance which should be around ~27Ω.|
|8E||Over Current Error||Switch the appliance off at the mains and wait 30 seconds. Switch the appliance on and try again, if the appliance has an inverter motor check windings are not open circuit- causes juddering.|
|8E1||MEMS Sensor Error||Check the connections to the MEMS sensor which is mounted on top of the tub. All they’re all secure then replace the sensor.|
|9E1, 9E2, PH1, Plo||Power Error||Check the supply voltage, check for loose power connectors or any with contact defects, check for defective noise filter and fuse.|
|AE, 13E||Signal Communication Error (between the Main PCB and Sub PCB’s)||Check all the connectors on the Main PCB and Sub PCB’s.|
|bE||Motor TRIAC Short Error||Swich off the power and then reconnect and try again. If the error persists then replace the PCB.|
|bE1, 12E||Power Button Fault||Power button held in for more than 13 seconds.|
|bE2, 14E||Control Button Fault||Any button (other than the power button) held in for more than 30 seconds.|
|bE3, 18E||Switch Error||There is a relay fault.|
|CE, E8||Cooling Error (temperature of water has not dropped below 55°C in 30 minutes after the washer cooling operation)||Check if water supply is connected to hot and if so change to cold only feed, check that the hot/cold water supply is not switched over, if the first two are OK then check the heater temperature sensor.|
|dE, Ed||Door Open Error (door not closed correctly/properly)||Door Open Error (door not closed correctly/properly).|
|dE1||Door Lock Switch Error||Check that the door is closed, check the switch for any damage and if so please replace.|
|dE2||On/Off Switch Error||Excessive heat build up in the coil due to button being operated continuously|
|FE||Fan Error (Dryer or Air Refresh fan fault)||Check start condenser/capacitor and fan motor connections, check to see if the fan is hammed, if no other fault then replace replace the start condenser/capacitor.|
|H1||Incorrect Water Temperature/Water Temperature rises quickly||Check the temperature sensor, check the pressure switch and hose.|
|HE||Abnormal water temperature||The temperature sensor has detected temperature over 100°C.|
|HE1, E5||Water Heater Error (this occurs if the water temperature has not reached 50°C in 20 minutes or does not rise more than 2°C)||Check the heater resistance which should be ~27Ω.|
|HE2||Dryer Heater Error (occurs if the dryer heater circuit is open circuit)||Check heater TCOs. One is resettable. if it needs to be reset; check fan for correct operation, check condenser water valve operation, check condenser for blockages.|
|HE3||Steam Function Fault||Check steam function and TCOs.|
|HOT||Appliance Too Hot (occurs if dryer is turned off early)||This is not a fault – the appliance fan will continue to run until the appliance is cool enough for the washing to be removed. The door will unlock when it is safe.|
|LE, LE1, E9, 11E||Water Leak (low water level detected during cycle)||Check that the level of the drain hose is not lower than the base of the Samsung washing machine.|
|OE, E3||Overflow Error (too much water/foam has entered into the appliance)||Too much washing power/liquid may have been added. Turn the power off to the appliance, wait 30 seconds, and then turn on again. The drain pump should kick into action to drain the appliance. Also check the pressure system for any debris/foam.|
|OF||Overflow Abnormal (water has reached the overflow level)||Check for any water valves which have stuck in the open position, check for debris/foam in the pressure system.|
|Sud||Excess Foam Detected||This is normal operation. The appliance will normally cure this condition on it’s own however if it doesn’t then run either an “Eco drum clean” or a 90°C cotton cycle with no detergent and no washing inside. If the problem persists then please check the pressure system and sump for any debris.|
|t1, t2, tSt||Appliance In Test Mode||Switch the appliance off at the mains and wait 30 seconds. Then, switch it back on and try again.|
|tE, EC||Temperature Sensor Abnormal Issue||Switch off the power and reconnect and try again. Check all the temperature sensors for relative continuity.|
|tE1||Water Heater Temp Sensor Defective||Check the connections to the sensor and PCB, check resistance which should be ~12.8kΩ|
|tE2||Fan Housing Duct Sensor Defective||Check the connections to the sensor and PCB, check resistance which should be ~12.8kΩ|
|tE3||Condenser Duct Sensor Defective||Check the connections to the sensor and PCB, check resistance which should be ~12.8kΩ|
|UC||Excessuve Fluctuation In The Supply Voltage (voltage has fluctuated outside 176-286vAC)||Check that the supply voltage is within specifications, reset the power supply to clear the error. If the error cannot be reset then please replace the main PCB.|
|UE, E4||Unbalanced Error (the washing load in the drum is unbalanced i.e. clothes may have got trapped inside a large towel and resting on one side of the drum)||This could be normal operation where the washing machine is stopping the spin for safety reasons. Please distribute washing more evenly. Check the weights and balancers for condition, check the shock absorbers for condition, check the springs for condition.|
Samsung washing machine DC error: How to easily fix the different DC error codes?
The most recent update was made on:
Samsung washing machine DC error is quite common and it is likely that you may come across this error. Read on to learn how you can fix the different DC errors.
Samsung’s top-loading washing machines show a variety of different error or fault codes to inform consumers of potential problems with the washing machine, according to the manufacturer.
Samsung washing machine DC error
In a Samsung washing machine, the DC error alerts the user that there may be a problem with the machine’s door. The majority of the time, the problem is not with the gadgets themselves. However, a significant percentage of consumers tend to operate their washing machines in a negligent manner, particularly when it comes to opening and closing the washing machine door. In addition, read |How To Clean Your Washing Machine With Disinfectants When There Is A Coronavirus Pandemic?
DC error in Samsung washing machine – Different errors
There are several instances in which Samsung washing machines will indicate a DC fault with the letters DE or Door, which may or may not be complemented with digits. The following is an example of how the probable Door faults will appear on your Samsung washing machine – DC, DC1, DC2, or DC3. Occasionally, the DC error codes will be shown as DE instead of DC in certain Samsung washers. Also Check out this article |Escobar Fold 2 or Samsung Galaxy Fold With Golden Skin? Marques Brownlee reveals the details of the scam
Samsung washing machine DC error fix
A DC code appearing on a Samsung washing machine may result in a variety of technical challenges, including problems shutting the hatch, the main door not unlocking if an error flashes at the conclusion of the washing cycle, and the washing machine closing but not locking. Look at what a certain error number on a computer means and how to resolve it in the next section of the article. Also Read |What Is The Meaning Of The IE Error In The Washing Machine? Learn how to fix the IE error code on your LG machine.
DC – The door is open
When this error message appears, you must double-check that the door has been closed properly. Also, check to see if any laundry has been entangled in the door, which can also result in this mistake.
DC1 – The Main Door lock/unlock is not working properly.
When a DC1 error occurs, turn off the washing machine and start the cycle over from the beginning.
Alternatively, if this does not resolve the problem, Samsung suggests that you call 1800 40 7267864 (toll-free in India) for more support.
DC3 – The Add Door lock/unlock is not working properly.
You should just switch off the washing machine and start the cycle again if you receive a DC3 error message. If the issue continues, you should contact the customer service department at 1800 40 7267864 for more assistance. Depending on how the machine behaves, the problem might be something minor or even tough at times, necessitating the need of a professional repair service; nonetheless, the troubleshooting steps outlined above should resolve the majority of the DC faults. |1E Error in Samsung Washing Machine: How to Resolve 1E or IE Error Code|
Published for the first time:
What does tE mean on a Samsung washer?
The DEError code on a Samsung washing machine indicates that the door is open or that there is a problem with the lock. Furthermore, what does UE signify on a Samsung washing machine? Error code UE for Samsung washer. Normally, the Samsung washing machine begins the washing cycle as it would. When it comes to spinning, however, it generates theUEerror. It indicates that you have overloaded the drum or, conversely, that you have placed a few objects in the drum.How can you reset a Samsung washer taking all of this into consideration?
When troubleshooting a Samsung washing machine, it is necessary to unplug it from the wall outlet or flip the breaker in the breaker box for the washing machine.How do you troubleshoot a Samsung washing machine?
- Ensure that the fuse is intact or that the circuit breaker is reset Ensure that the drain hoses are straight. Remove kinked hoses from the system. Identify and troubleshoot any drain obstructions that may exist. Close the door and hit the Start/Pause button on the remote control
- Because it is for your protection, your washer will not tumble or spin unless the door is completely closed.
All Samsung Washing Machine Error Codes
NOTICE: This post may include affiliate links, which means that if you click on the links and make a purchase, we will get a fee at no additional cost to you. DISCLAIMER: In this post, we will demonstrate how to recognize and correct error codes on a Samsung washing machine. When a problem occurs with your SAMSUNG washing machine, an error number will be shown on the user interface panel, informing you of the specific component of the washer that has failed and requires your attention. Two figures appear on the digital display at the front in most circumstances, indicating that this is the case.
list of error codes for Samsung washing machine.
Within 10 minutes, the washer was unable to drain properly. To begin, make sure that your drain filter (located at the bottom of the left side) is not blocked (see illustration). It is possible that you will need to physically empty the water from the drum first, and only then open the drain filter. If you hear a type of rattling noise coming from the pump, it means that the drain pump is nearing its end, which is caused by the drain motor impeller slipping off the motor shaft and off the motor shaft.
You may purchase a Samsung drain pump by visiting this link.
Samsung Washing Machine Error Code sLO,dS, d5, FL, LO, L0, dE, dE1, dE2, dc, dL, 1 dC, 1dC4, 1dC1
This means that the door lock is unable to lock even after repeated attempts.
The majority of the time, it is simply a malfunctioning lock. According to the control board, the door lock was physically secured but could not be verified. In this situation, you will have to replace the lock because it cannot be repaired.
Samsung Washing Machine Error Code snF, 4C, 4E, 1 4C–
The washer is not filling with water. There are two things that are likely to occur in this situation. One of them is a malfunctioning water entry valve, and the other is that the water faucet is turned off. Remove the top cover from the washer and use a multimeter to check for continuity in the water inlet valves before continuing. Don’t forget to unplug the machine after you’re finished. If you receive ZERO continuity, this indicates that the valve is faulty.
Samsung Washing Machine Error Codes1E, LE, 1C, LC, LC1, 1 1C, 1 LC–
Failure of the water level sensor Alternatively, the water hose linked to the sensor may get disconnected from the drum as a result of vibration, or the water line may become blocked with muck, rendering the sensor unable to accurately detect the amount of water remaining in the drum. It is necessary to disconnect the hose from the sensor and just blow into the hose to ensure that it is not blocked. If everything is in working order, you only need to replace a sensor with a new one.
Samsung Washing Machine Error CodesOE, 0E, OC, 0C, 1 OC, 1 0C–
Overflowing water is a problem. Faulty water inlet valves and poor water level sensors are two of the most prevalent causes of water leaks. If the water level rises slightly even after the machine is turned off, this indicates that the input valve is not maintaining water pressure and is not completely closed. All that has to be done is change the input valve. The water level sensor should be the next thing to examine. Simply ensure that the hose connecting to the sensor is securely fastened and that it is not coming loose from the sensor or from the drum at the bottom of the sensor.
Samsung Washing Machine Error CodesSUd, 5UD, Sd, 5d, SUdS, 5Ud5–Excessive sudsin the machine.
The most common reason for this is that the improper detergent was used. Pour several spoons of cooking oil into the drum and run the machine on the Quick Cycle with Hot Water cycle to remove suds.
Samsung Washing Machine Error CodesUb, U6, Ur, UE, 1 Ub, 1U6– Unbalanced Load.
It appears during the spin cycle when the machine is unable to disperse the load evenly inside the drum, resulting in this error. As a result, if you hear banging noises throughout the spin cycle or if the machine is unable to finish the cycle, you will receive those error numbers. On a top-loading washing machine, you should inspect the suspension with four metal rods to ensure that the rods are securely linked to the frame and are not damaged. When it comes to front-load washing machines, problems might arise with the shock absorbers or suspension springs that support the weight of the drum during operation.
Samsung front-load washer dc error code
The presence of an Adc error number on your Samsung front-load washer indicates that the load is imbalanced, and the washer will not spin. Redistributing an imbalanced load or adding a few garments to a tiny or single-item load can be as simple as resetting the dc error code on the computer.
Balance the load
To start your washer spinning again, try one of the alternatives listed below.
- Tangled sheets and balled-up trousers can cause the washer to pound and thump when they are washed in the same load. It is necessary to open the door, redistribute the load, and repeat the cycle in order to remedy the problem of the basket not spinning due to a huge, tangled object that is weighing down one side of the spin basket. The use of a single item or a tiny amount of material might result in an imbalanced load. In this case, add a few towels to the load to allow the washer to balance the items and spin the basket without triggering the dc error code. Oversized loads can also cause the dc error code to appear. A disproportionately large load cannot be distributed evenly throughout the basket by the washer. If you have overfilled the washer, remove some of the items and repeat the cycle. Load things loosely into the washer until the basket is completely full for future loads.
Level the legs
The leveling legs under the washer should be checked if the dc error code is shown even when the load is balanced. A solid grip on the floor is required on all four leveling legs in order to ensure stability when the washer is spinning. To test the stability of the washer, press down on the kitty corner of the top of the washer. It is possible that the washer will vibrate and generate an error code if it rocks even slightly during the spin cycle, as described above. A leveling leg may be adjusted by removing the lock nut that holds it in place and twisting the leg clockwise to lower it or counterclockwise to elevate it from its original position.
After you’ve adjusted the leveling leg, tighten the lock screw down securely.
As soon as you have adjusted the leveling legs to ensure that the washer is sturdy, you should set a bubble level on the top of the washer to ensure that it is level from front to rear as well as from side to side.
If the levelness is off by a quarter bubble or less, there is no need to do anything about it. If the levelness is off by more than a quarter bubble, the legs should be adjusted.
Check for a broken part
If you’re still getting the error number after trying these suggestions, it’s possible that a damper shock or suspension spring has failed. Remove the top panel and unplug the washer in order to inspect those components. You may either replace the damaged component yourself or have a service expert replace the part if you aren’t confident in your ability to execute the repair.
What Does That Flashing Number Mean on My Samsung Front-Load Washer?
Something is wrong with your Samsung front-load washer if the numbers and letters on the display start flashing. But what is it? It might be something as easy as a loose screw that you can fix yourself to avoid having to call a service technician. Alternatively, it might be dangerous enough that you should remove yourself from the washer and bring in an expert. According to the United States Consumer Product Safety Commission, Samsung issued a recall in 2016 for 2.8 million top-loading washing machines manufactured between March 2011 and April 2016 because the top can unexpectedly detach while in use, posing a risk of injury from impact.
On the commission’s website, you can get a comprehensive list of the models that were recalled.
Samsung Front-Load Washer Fault Codes
If that shows the lock is defective, replace it.
Check those areas for any wear and tear, including metal or plastic shavings on the floor of the washer interior.
This extends the length of the cycle, leaves your clothes sticky and soiled from redeposited dirt, and can make yourwasher smell.Allow the suds to settle, and move to the spin cycle.
Replace the water inlet valve assembly.
If the drain pump is defective or damaged, replace it.
If you can’t free the key, replace the user interface control board (also called the sub-PCB control board).
Check the wire harness connections on the drive motor and the electronic control board.
Plug the washer back in.If the code returns, replace the electronic control board.
If the wiring connections are sound, replace one or both of the control boards.
Unplug the washer for five minutes to reset the main PCB control board. Plug the washer back in.If the code returns, replace the main PCB control board.