Samsung Tablet Wont Charge When Plugged In

Contents

Samsung Tablet Won’t Charge When Plugged In [Tips and Tricks in Solving This Problem]

A frustrating element of having an electronic equipment is when the item no longer has any power to aid you in your task, which can happen at any time. This is made much more annoying when it refuses to charge in the first place! This is a common problem that many Samsung tablet owners encounter. The Samsung tablet has been the subject of several instances in which it has refused to charge or has shown signs of charging but has failed to charge at all. Consequently, what should you do if your Samsung tablet refuses to charge?

This troubleshooting article will teach you how to fix your Galaxy Tab A if it isn’t charging properly.

We hope that this post will be of use to you in fixing the problem as fast as possible.

Article Overview

A few things you may do to solve the problem of your Samsung tablet not charging or charging properly if your charger isn’t working are as follows: When a Samsung tablet does not charge, the most typical reasons for this are as follows:

  • A defective cable, charging block, charger cable, or adapter
  • Dirt or debris in the charging port
  • A bad cable, charging block, charger cable, or adapter
  • It is important to upgrade the software due to third-party apps interfering with the charging process
  • If your phone isn’t charging, find out what to do next.

7 Tips and Tricks You Can Check and Do if your Samsung Tablet Won’t Charge

There were countless hours spent researching and compiling this list of patches, which are relevant to all Samsung Tablet models from the Samsung Tab 1 to the Samsung Tab 6. Let’s get this party started!

1. Factory Reset Your Samsung Tablet

When it comes to getting your Samsung Tab to charge, performing a reboot or reset is one of the most successful approaches. While there is only “one traditional approach” for accomplishing this, there have been various additional methods (see below) that have shown to be quite successful in recent years. In addition, it is important to note that adopting these methods will not result in any data being lost. Reset Using the Traditional Method Try pushing and holding the volume up and power buttons at the same time for 30 seconds to see if it works.

  • 1.
  • 2.Press and hold the power button as well as the volume up button for thirty seconds.
  • 4.
  • 5.Now, merely press and hold the power button while simultaneously pressing and holding the volume up button.
  • Procedure for Charging a Micro SD Card A further modification on the previously mentioned techniques that has been demonstrated to be effective is shown here.
  • Take the Micro SD card out of the tablet and place it somewhere safe.

2. Make use of a Rapid Charger

One of the most efficient techniques of recharging your Samsung Tab is to do a reboot/reset on the device itself. While there is only “one traditional approach” for accomplishing this, there have been various additional methods (see below) that have shown to be quite successful in the past as well. In addition, it’s important to note that adopting these procedures will result in no data loss. Traditional Reset Methodology For 30 seconds, try pushing and holding the volume up and power keys at the same time.

  1. Remove the Samsung Tab’s charger from its base.
  2. While connecting in the Samsung charger, continue to keep the button down.
  3. 5.Now, merely press and hold the power button while simultaneously pressing and holding the volume up button.
  4. This is an uncommon approach, but one that should allow your tablet to charge once more!

How to Charge a MicroSD Card The following is a further modification on the approaches described above that has been demonstrated to be effective. 1. Take the Micro SD card out of the tablet and place it somewhere else. For 20-30 seconds, hold down the power and volume down keys at the same time. 3.

3. Examine the Charger

More often than not, the problem is caused by wear and tear on the cable rather than the adaptor itself. Withyour Samsung Galaxy tablets,it is advised that you use the official USB cable, adapter, and quick charger from Samsung. These gadgets, however, aresusceptible to harm. Performing a thorough inspection of the cable may be advantageous in this situation. A malfunctioning USB cable is not only wasteful, but it may alsopose a fire danger in specific instances. Remove the cord from the quick charger or adapter and examine it for signs of wear and tear.

  1. These are composed with high-quality materials that are suited for use with the Samsung Galaxy Tab 10.1 inch tablet.
  2. It should only be used with your device.
  3. Chargers and cords from low-quality third-party manufacturers are not meant to deliver optimal quantities of power to the Samsung tablet and may create charging troubles.
  4. Any device, from a laptop to a power bank to a home console to an Apple charger, may be used in this manner.
  5. With the Samsung tablet, you may also experiment with a Samsung charger that is swift or fast.
  6. However, it will not charge your tablet rapidly and will not do any damage, but it may activate the battery, particularly if the battery is completely drained and refuses to charge.

4. Examine the battery connection and charging cable for safety

Check for gaps and to ensure that the battery is flush against the mounting bracket. If this looks to be the case, remove the battery and thoroughly check the connections on the back of it. Remove any dirt from the area with a soft cloth, adjust any bent metal with a tiny pair of tweezers, and wipe any corrosion away with a small quantity of a suitable cleaning solution. Simply ensure that the connection is completely dry before recharging the battery. Charging cables may become controversial or outmoded after a period of extensive use.

5. Run a forced power cycle

When the battery on your tablet becomes unresponsive, you must execute a forced power cycle in order to return the battery to its original condition. You must entirely drain the battery of your tablet in order to force a power cycle. There should be no battery remaining to allow the power-up screen to be shown. Then connect the charger and allow it for 4-5 hours to complete the process. As a result, your tablet’s battery will become more receptive to power and it will begin to charge your Samsung tablet.

6. Examine the charging port

Click here to bring the page to a close. The charging port on your tablet may get blocked with dirt, dust, or other debris over time. Because of the presence of foreign materials within the charging port, it is possible that the charging cable will not be able to connect correctly with the charging contacts. Follow the methods outlined below to thoroughly clean your charging port: 1. Turn off your tablet computer. 2. Check the charging port for damage. It’s possible that you’ll need to use atorch to help you.

3.

Please bear in mind that you should not attempt to clean the charging port by inserting anything into it. This has the potential to cause harm to the charging port. 4. If the charging port is still clogged, it should be cleaned by a professional technician.

7. Charge from a different power outlet or power board

Consequently, even though this is a rather simple solution, if you haven’t previously done so, it may be worth a shot. You may just charge your Samsung tablet from another PowerPoint or socket to see whether the problem is with the PowerPoint or with the tablet itself. Locate or hit an orange button if you see one.

8. Allow time for the battery to recharge

It is possible that a battery that looks to be dead has been deeply discharged. This indicates that the quantity of charge extracted from the battery was larger than the amount of charge the battery was meant to handle, and as a result, there is so little charge left in the battery that it looks to be dead. If a battery can be recovered from a severe discharge, it must be turned off entirely and recharged for a lengthy period of time before it can work again (at least two or three hours).

9. Charge using a computer

Connecting a non-charging item to a computer might be advantageous in some situations. When doing this procedure, make certain to utilize the original USB cord in order to avoid the potential of a faulty cable being used.

10. Reset the app’s preferences

In certain cases, verifying that the default applications are activated might help to alleviate charging problems. Android applications and services do not work independently of one another. The majority of them need the usage of additional programs as well as the basic system apps in order to fulfill their responsibilities. If one of the default programs has been deactivated for whatever reason, there may be a problem with the system. Follow these steps to verify that all default applications are re-enabled on your device:

  • Open the Settings application. Apps should be selected. More settings (three-dot icon) may be found in the top right corner of the screen. Select Reset app preferences from the drop-down menu. Restart your Galaxy Tab A to see whether the problem has been resolved.

11. Charge in the Safe Mode

Only applications that are pre-installed with the operating system will be permitted to operate in this mode. Everyone else who has been added will be blocked, so if one of them is responsible for your tablet malfunctioning, you should be made aware of it right away. Overall, the premise behind safe mode booting is that since no third-party programs are running in safe mode when the tablet is first powered on, the root problem must be one of those apps. To put your smartphone into safe mode, perform the following actions: Keep pressing and holding the Power button on your Tab, A while it is switched off until you see the model name on the screen.

  • Immediately after seeing the word “SAMSUNG” on the screen, press and hold the Power button. Continue to hold down the Volume down key until the device has completed its restart. It will display in the bottom left corner of the screen
  • Safe mode will be activated. When you see the Safe Mode screen, release the Volume Down key. It’s possible that a third-party app is keeping your Galaxy Tab A from turning back on after charging regularly to safe mode

To discover which of your applications is causing the problem, use the procedures outlined below:

  • Safe mode should be activated. Look for the source of the problem. You may begin deleting programs one by one when you’ve determined that a third-party application is to fault. We recommend that you begin with the most current ones that you have uploaded
  • Otherwise, you may run into problems. Immediately after deleting an app, restart the phone in normal mode and search for the source of the problem
  • If your Tab A still won’t switch back on, try steps 1-4 until the problem is resolved.

12. Delete the cache partition

A damaged system cache might be the source of your Galaxy Tab A’s charging issues after you installed a system update on your device. Check to check whether this is the case by deleting the cache partition. As a result of this, the device will be requested to rebuild the systemcache on its own. Here’s how to go about it: 1. Disconnect the gadget from the power source. This is quite important. If you are unable to turn it off, you will never be able to boot into Recovery Mode. It is best to wait until the phone’s battery is completely exhausted if you are unable to switch off the smartphone on a regular basis using the Power button.

You might be interested:  How To Reset A Samsung Dishwasher

2.

Afterward, the Android Recovery screen should appear, displaying choices such as Reboot to system now, Reboot to bootloader, Apply update via ADB, wipe data/factory reset, erase cache partition, and so on.

4. To move through the settings, just use the Volume Up and Volume Down buttons on your controller. 5. Make a big deal about wiping the cache partition. 6. After erasing the cache partition, restart the device.

13. Recalibrate the battery and the operating system

A damaged system cache might be the source of your Galaxy Tab A’s charging issues after you installed a system update. Check to check whether this is the case by removing the cache partition from your computer. Consequently, an alert will appear on the device asking it to rebuild the systemcache. Listed below is the procedure: Remove the gadget from its charging station. We cannot overstate the importance of this point. In the event that you are unable to turn it off, you will not be able to boot into Recovery Mode.

  • Next, charge the phone for 30 minutes before attempting to boot into recovery mode.
  • Afterward, the Android Recovery screen should appear, displaying choices such as Reboot to system now, Reboot to bootloader, Apply update via ADB, wipe data/factory reset, erase cache partition, and so forth.
  • To move through the choices, simply use the volume up and down keys.
  • 6.
  • 7.

14. Go to a Samsung Center

A visit to the nearest Samsung Center or local Samsung Store may be of assistance if all other options have been exhausted. They have specialists on staff who can diagnose physical faults with the Galaxy device or battery and will give new components to ensure that your Samsung tablet is repaired correctly the first time. If your Samsung tablet is no longer protected by the manufacturer’s warranty, several private repair providers can provide good service as well. Even though they are often less priced, selecting one that is reliable will need some research.

Our Final Thoughts

This section contains information on how to resolve charging difficulties with your Samsung tablet. The majority of the time, a straightforward résumé will serve. This, on the other hand, is conditional. If everything else fails, we strongly recommend that you contact a Samsung service facility to receive a correct expert diagnosis and treatment.

Frequently Ask Questions

This section contains information on how to fix charging problems with your Samsung tablet. Generally, a short CV will sufficient for most jobs in most situations. It should be noted that this is subject to certain conditions. If everything else fails, we strongly recommend that you contact a Samsung service facility to receive a correct expert diagnosis and solution.

Why won’t my Samsung battery charge?

It is one of the most common reasons of charging problems to have the charging port clogged with dirt, dust, or other foreign matter. Cleaning the charging port is important because dirt and lint can build up and prevent the charging cable from properly interacting with the charging contacts.

Is it necessary to hold the phone at a specific angle in order to charge it?

If you look near the charging port, you will find some brownish residue or debris. Each of the components, including the charger and battery, functions perfectly.

Samsung Tablet not Charging When Plugged In – 9 Fixes

Is your Samsung tablet not charging even when it is plugged in? There might be a variety of factors contributing to this, including certain hardware faults that are readily resolved. In contrast, if your tablet is still covered by warranty, we recommend that you contact a shop for an easy and convenient diagnostic procedure. We’ve collected a list of the most common reasons why your Samsung tablet isn’t charging. We’ve all had charging problems with our smartphones, and as technology enthusiasts, we’ve attempted a variety of solutions to resolve the problem on our own.

The answers are simple to follow, and there is a good chance that you will be able to address the difficulties without too much difficulty. In our troubleshooting tutorial, we explored the following topics:

  1. Checking the charger/cable
  2. Checking the port
  3. Checking for moisture
  4. Restarting the tablet
  5. Running the Samsung Members App
  6. Checking the battery
  7. Checking the battery. Checking for new information
  8. The battery must be removed. It’s time to reset the device. Paying a visit to the Samsung Service Center

Samsung Tablet Not Charging – Possible Solutions

Rather than the adapter or the cable, the most typical source of failure is wear and tear on the adaptor. It is highly advised that you use the genuine Samsung USB cable, adapter, and quick charger with your Samsung Galaxy tablets to avoid any problems. These gadgets, on the other hand, are prone to malfunctioning. In this scenario, properly inspecting the cable may be beneficial. Using a damaged USB cable would not only be ineffective, but it may even pose a fire risk, depending on the situation.

  • Purchase a charging cord produced by Samsung.
  • You should use the charger that came with your tablet because it is the official one.
  • If it doesn’t work, obtaining another one straight from Samsung might be a good alternative.
  • Chargers and cords from third parties that are of poor quality are not designed to give optimal quantities of power to the Samsung tablet, and as a consequence, might cause charging issues.
  • This can contain anything from a laptop to a power bank to a home console to an Apple charger.
  • You may also use a Samsung rapid/fast charger with the Samsung tablet if you want to save time.
  • It will not charge quickly or damage your tablet in this manner, but it may activate the battery, particularly if it is completely depleted and refuses to recharge.

2. Check the Port

During use, the charging port may become soiled with little particles of dirt, debris, sand, and even pet hair becoming trapped inside. To begin, switch off the Galaxy Tab fully and disconnect the charging adapter from the device. To check if the charging port is obstructed, use a flashlight to shine it inside it. If you want to clean the charging port, avoid putting anything metallic within it. Blow gently into it to take out any stray particles of foreign things that may have gotten within.

While we’re on the subject of ports, make sure to double-check your electrical outlet.

It is best to just plug them into an electrical socket that is already in use by another electronic equipment.

Visiting your local repair center will take care of the problem if it’s still not completely clean.

3. Check for Moisture

Samsung smartphones are equipped with a fail-safe function that prevents water and moisture from causing harm to the electronic components. As a safety measure, if the Galaxy Tab senses any moisture inside the charging port, it will not charge at all until the moisture is removed. The good news is that you don’t have to peek inside the port to find out if it’s moist or not. A handy water drop indicator will be presented on the screen to indicate the presence of moisture, allowing you to quickly and easily repair the problem.

The moisture will eventually evaporate, allowing you to recharge your tablet once more.

Simply set your tablet in a dry location or near a fan that is blowing directly at it.

Another respected journal, Gazelle, conducted some semi-formal testing on wet phones in rice and arrived to the same result as the previous study.

If the water drop indicator does not disappear after several hours of waiting, it is possible that you need to delete the cache for the USB device. To do so, follow these steps:

  • Samsung smartphones are equipped with a fail-safe function that prevents water and moisture from causing harm to the electronic components inside the device. The Galaxy Tab won’t charge if it detects any moisture within the charging port, which is done as a precautionary measure. Fortunately, you don’t have to peek inside the port to determine whether or not it is moist. If moisture is detected on the screen, a convenient water drop indicator will appear, allowing you to quickly and easily address the problem. Simply store your Galaxy Tab in a warm, dry location in this case. The moisture will evaporate, allowing you to re-charge your tablet device once again. The use of rice to soak your Galaxy Tab may be beneficial, however our tests revealed that the benefits were insignificant. To do this, just place your tablet in a dry location or near a fan that is blowing directly. Eventually, it will dry on its own. Another respected journal, Gazelle, conducted some semi-formal testing on wet phones in rice and arrived to the same result as the previous publication. The USB cache may need to be cleared if the water drop symbol does not disappear even after several hours of waiting. Here’s what you’ll need:

Samsung smartphones are equipped with a fail-safe function that prevents water and moisture from causing harm to the electrical components. As a safety measure, if the Galaxy Tab senses any moisture within the charging port, it will not charge. Fortunately, you don’t have to peek inside the port to determine whether it is moist or not. A handy water drop indicator will be presented on the screen to indicate the presence of moisture, allowing you to solve the problem quickly and easily. If this is the case, simply store your Galaxy Tab in a warm, dry environment.

Putting your Galaxy Tab in rice can help, although the benefits were minor in our tests.

It will dry on its own.

If the water drop indicator does not disappear after several hours of waiting, you may need to delete the USB cache.

4. Use Samsung Members App

When it comes to your Samsung tablet, the Samsung Member App is an excellent resource to have. Some tablets also come with it pre-installed, which is convenient. For this approach of diagnosis, the following is true:

  • Go to the app drawer and choose it. Choose the Samsung MembersApp from the list. Once it has been opened, click on theGet Helpbutton located at the bottom of the screen
  • Once it has been opened Select Interactive Checks from the drop-down menu. To conduct testing, choose the Battery and USB/Charger choices.

The program will conduct tests on your Samsung tablet and inform you of any issues that were discovered. A clear software-based diagnostic of your device will be provided as a result of this.

5. Restart the Tablet

Restarting practically any electrical device can solve a variety of problems. This guideline applies to Samsung tablets as well as other brands. It’s possible that simply turning off and on the tablet can alleviate any charging issues.

  • Holding down the power button for a few seconds until a device menu shows with choices to reset or power down the tablet will shut off the tablet. By pressing theRestartbutton, the gadget will be turned off automatically. Make certain that you have unplugged the charger during this time. Allow the gadget to come to life
  • Check to check if the charger is still charging by plugging it in.

Holding down the power button until a device menu shows with choices to reset or power down the tablet will shut off the tablet. The gadget will switch off automatically if you press the Restartbutton; While you’re doing this, make sure you unplug the charger. Activate the gadget by pressing the power button. Check to determine whether the charger is still charging by plugging it in again.

  • Remove the charger from the wall outlet
  • Press and hold the Volume Up and Power Button for at least 30 seconds
  • Some tablets make advantage of the combination of the Power Key and the Volume Down button
  • Continue to hold down the buttons while connecting the tablet’s charger to the device. Keep on holding the buttons for another 30 seconds or so
  • Now, while holding down the power button, push the volume up button one more time. See if charging resumes

Although it may appear to be a weird thing to do, several people have stated that it has helped them with their Samsung tablet charging troubles. If your tablet is equipped with a Micro SD card port, you can attempt the following method:

  • Remove the Micro SD card from the slot designated for this purpose
  • For 30-35 seconds, press and hold the Volume Up and Power Keys at the same time. Some Samsung tabs also make use of the Power Key and the Volume Down Button
  • Connect the charger to the wall outlet

Make sure you press the Volume Down Button in conjunction with the Power Button to test whether it works.

6. Update Software

Samsung updates its tablets on a regular basis, adding new software and security patches to the mix. Charging issues with Samsung tablets might occur if the gadget is running outdated software, according to the manufacturer. Occasionally, upgrading the device may be necessary to resolve the charging issue. To upgrade the Samsung tab, follow these steps:

  • Navigate to theSettings menu. Select Software Update from the drop-down menu. Choose Download and Install from the drop-down menu. To begin, make certain that your device is connected to the internet. A search for available upgrades will be carried out automatically by the tablet. If a new update is available, download it and allow it to install

7. Remove the Battery

Note that this is only relevant to older Samsung tablets that have a detachable back cover. This feature is not accessible on new Samsung tablets, and removing the backplate may result in the loss of your warranty. If you have the ability to simply access the rear and remove the battery, you should consider doing so. Remove the battery and the charger from the device, wait a few minutes, and then reinstall them both.

Now, insert the charger into the tablet and observe if the charging process begins. When you remove the battery from your gadget, any static energy on the device will be discharged. Please note that you must first switch off your device before doing this procedure.

8. Reset The Device

This is the nuclear option, and I do not advocate that you use it, especially if you are trying to resolve charge issues. It is possible, however, that merely restarting the device will be beneficial in some cases. I’m not referring to simply restarting the tablet; rather, I’m referring to doing a complete reset of the entire tablet. Resetting your device will return it to its factory settings, and you will lose all of the data stored on the device throughout the process. It is normally recommended that you just backup your whole tablet before proceeding with this step.

  • Thesettingsmenu
  • Locate theBackupRestoreoption from the drop-down menu. The tablet will alert you to the fact that your data has been lost. Accept the outcome of the choice
  • In a couple of minutes, the tablet will be factory reset again.
You might be interested:  How To Disable Samsung Pass

After the reset, the device will be restored to its factory default settings. It has no direct relationship to the power or charge, however a simple reset can assist in the resolution of software issues. Is it possible to repair your charging issues with a factory reset? What it will be is difficult to say, and this is precisely why it will be the final feasible alternative before returning the Samsung tablet to the manufacturer. Depending on the phone model you are using, the reset options are accessible in a different area in the settings menu.

9. Visit a Samsung Center

Even if everything else fails, visiting your local Samsung Center or Samsung Store may be able to assist you. They have specialists on staff who can diagnose the physical problem with the Galaxy device or battery and will then give new components to ensure that your Samsung tablet is correctly repaired. If your Samsung tablet is no longer protected by the manufacturer’s warranty, several private repair centers can provide excellent assistance. They are generally a little less expensive, but choosing a reputable one will need some investigation.

Conclusion

Here are some suggestions for resolving the charging issues with your Samsung tablet. The vast majority of the time, a simple restart will suffice. This, however, is dependent on the situation. It is highly recommended that, if everything else fails, you contact the Samsung repair center to have a correct expert diagnosis. Using a pry tool and a heat gun, you can open the newer tablets manually, although this is not suggested if you want to leave the glass backs of the tablets in tact.

How to fix a Samsung tablet that’s not charging

When it comes to tablets, Samsung produces some of the best options available on the market today. As the largest manufacturer of Android tablets, they have no competition other than from Apple, which is a close second (check out this article comparing theSamsung Galaxy Tab S7 and iPad Minito see the difference). However, you may experience charging troubles with any tablet from time to time. Furthermore, if your Samsung tablet is not charging, it is likely that anything is wrong with it. Nonetheless, this does not necessarily imply that your tablet is at fault; thus, refrain from drawing premature judgments at this time.

It might be a tough problem to deal with, but the solution should be rather straightforward. Here’s what you should look for if your tablet isn’t charging correctly.

How to fix a Samsung tablet that’s not charging

The first step is to determine whether or not your Samsung tablet is charging at all, or if it is charging slowly but steadily over time. Our attention in this post is focused on a tablet that is completely unresponsive to charging. If your tablet charges for a split second and suddenly pauses, the most likely cause is a network connection problem. The cable may be causing this, and it is far more probable that it is the cable itself rather than a problem with your device itself, as previously stated.

Using a cable and wall charger that are not the originals increases the likelihood that the amperage is not providing enough power to the device.

If you’ve misplaced your charger, look for one that has the same or higher capacity as your original.

Start by resetting your device

Whenever you are unable to charge your Samsung tablet, the first thing you should do is do a soft reset on the device. Although you will lose your data and applications, this is not a complete reset of your tablet, so don’t be concerned about that. If you hold down the power button and the home button together for a few seconds, you can generally soft reset your smartphone. If your home button isn’t working, the procedure is a little different. If you want to know how to reset a Samsung tablet even if it doesn’t have a power button, check out this article that explains how to reset a Samsung tablet without a power button.

While you’re doing this, make sure to plug your tablet’s charger into it as usual.

After a certain amount of time, the tablet should turn on automatically.

Try another charger and cable

Whenever you are unable to charge your Samsung tablet, the first thing you should do is do a soft reset on your device. Although you will lose your data and applications, this is not a full reset of your tablet, so don’t be concerned about that. If you hold down the power button and the home button together for a few seconds, you can generally soft reset your phone. If your home button isn’t working, things are a little different. In case you’re wondering how to reset a Samsung tablet even if it doesn’t have a power button, have a look at this instruction on how to reset a Samsung tablet.

While you’re doing this, make sure to plug your tablet’s charger into it as you normally might.

Continue to hold down the buttons for a total of 30 seconds more. The tablet should turn on after a short length of time. This will not work for newer devices such as the Samsung Galaxy S7, but it will work for earlier models such as the Samsung Galaxy Tab 2.

Leave it on charge for a while

When we try to switch on the tablet, we can typically figure out where the problem is coming from. In order for a dead tablet to be turned on, the screen should display a low battery indicator, which should be accompanied by a connecting wire. This indicates that you need to charge your tablet computer. After that, connect your tablet to a wall charger and check to see if the charging symbol has disappeared. If this is the case, you should leave your tablet to charge for an extended period of time.

In contrast, if you plug in your charger and the cable sign doesn’t vanish, this suggests that there is an issue with the hardware in your computer.

Holding the power button for a significant length of time – 20 or 30 seconds – after your tablet has been charging for a few hours should yield the best results.

Update your tablet

If you are able to get your tablet to turn on and function properly, you should use the opportunity to upgrade it if you have the ability to. If you go into settings, you should be able to discover the About section on your Samsung tablet – from here, you’ll be able to see if any updates are required for your device. An update to the software on any tablet, laptop, or other electronic gadget that we use is critical to extending its longevity. And if you don’t maintain it up to date, it might create a variety of faults, including battery difficulties, on your computer.

Remove the SD card

Even while it is not a typical source of charging troubles, some customers have experienced problems with their SD cards and their batteries. If your tablet has a micro SD card slot, you should make certain that it is free of obstructions. According to theory, this should not provide much of an issue in terms of how the two components interact with one another. Although using an SD card on a frequent basis will cause your battery life to deplete more quickly than usual, it should not prevent your device from functioning completely.

Additionally, if you are using a SIM card, it may be worthwhile to remove it as well.

Boot it up in safe mode

All that activating safe mode accomplishes is to start your tablet with the bare minimum of features. This implies that it will not be able to load any of the apps or programs that you have previously downloaded to your smartphone. The benefit of doing so is that it allows you to determine if the problem is caused by your hardware, such as your tablet, or by your software, such as your operating system. When you start your tablet in safe mode, you can almost always rule out any issues with the programs that are installed on your device.

Even if this does not resolve the problem, it will alert you if there is anything on your tablet that is preventing you from charging it.

Conclusion

When it comes to how they function and what we can do to charge them, tablets are unfortunately quite similar to smartphones in many ways. Due to the fact that they all work in the same way, it might be difficult to determine if the fault is with your tablet or whether the problem rests someplace else entirely. In any case, we will be able to determine if the problem is caused by the tablet or its charger. Then we should be able to come up with the most appropriate answer.

Samsung Tablet Not Charging – Complete Guide! (7 TIPS)

You’re going to lose your mind because your Samsung tablet isn’t charging properly. Before you do that, have a look at some of the remedies listed below, which should hopefully resolve the Samsung table won’t charge issue for you. Following several hours of study, we’ve created a list of patches that are applicable to all Samsung Tablet models, ranging from the Samsung Tab 1 to the Samsung Tab 6. Let’s get this party started!

Samsung Tablet Not Charging – Complete Guide! (7 TIPS)

You’re ready to lose your mind because your Samsung tablet will not charge. First, have a look at the solutions listed below, which should hopefully resolve the Samsung table won’t charge issue. Following several hours of study, we’ve created a list of patches that are applicable to all Samsung Tablet models, ranging from the Galaxy Tab 1 to the Galaxy Tab 6. Countdown to the start of the game

Traditional Reset Method

In order to do a standard reset, which should erase any software issues, you’ll want to press the volume down button and the power button together for 30 seconds at the same time. It is also possible to attempt pressing and holding the volume up button as well as the power button together for 30 seconds if the previous method does not yield results.

Disconnect Charger Method

This procedure requires a few more steps, but it appears to be really effective! 1. Unplug the charger from the Samsung Tab2 computer. For 30 seconds, hold down the power button and the volume up button simultaneously. 3. While still holding the device, plug in the Samsung charging cable. Continually press and hold the buttons for another 30 seconds 5. Release just the power button at this point, and keep pressing the volume up button. However, while this is a strange solution, it should hopefully enable your tablet to charge once more!

Micro SD Charger Method

Here is another expansion of the procedures described above, which has also been shown to be highly effective. 1. Take out the Micro SD card from the tablet.2. Hold down the power button as well as the volume down button for 20-30 seconds.

2.Use a Rapid Charger

If your Samsung tablet is lingering around the 5 percent charge level but is refusing to charge further, this may be the solution you’ve been looking for! For those who have never had a Samsung Tab 6 or 7, a quick charger should have been included in the package with your purchase. Simply put in this charger, and the tablet should be able to come out of its inactive battery status, if not sooner.

3. Try a Different Charger Or Even An Apple Charger

It’s possible that this will solve your problem if your Samsung tablet is lingering around the 5 percent charge mark but is refusing to charge further.

For those who have never had a Samsung Tab 6 or 7, a quick charger should have been provided in the package with your device. All you have to do is put in this charger, and the tablet should be able to come out of its inactive battery status, hopefully.

4. Charge From a Different Powerpoint Or Power Board

So, even though this is a fairly simple remedy, if you haven’t already done so, it may be worth your time to give it a shot. Charge your Samsung tablet from a different powerpoint or socket to see whether the problem is with the powerpoint itself. In addition, if you are utilizing a power board, they can get overloaded and trip, resulting in all devices not running or charging as a result of this. You should be looking for or pressing an orange button that says “Enter.”

5. Check For Debris In The Charge Port

Another really effective repair is to thoroughly clean the charging port on your tablet, which may be preventing a successful connection from occurring. This is necessary since the charging port might become clogged with dirt, dust, and lint over time. This dirt may be removed with the help of a toothpick, a SIM card tool, a straw, a toothbrush, or a q-tip that has been sliced into a few pieces. The connection should now be confirmed when you insert your cable and hear a “click,” indicating that it is properly connected.

6. Place Samsung Tablet In Rice

If you have accidentally fallen your Samsung tablet into water or any other liquid and are now unable to charge it, this is an excellent solution! Powering down the tablet and placing it in a huge container of rice is exactly what you want to do. The rice should be placed in an enclosed container or sealed bag if possible, and it should completely fill the pill. Now, wait for 24-48 hours before continuing. While this step may appear unusual, it is necessary because rice is excellent at absorbing excess moisture or water that has accumulated in the tablet during the manufacturing process.

7. Remove Back Case (If Possible)Remove Battery Connections

While Samsung tablets are not intended to be disassembled, with the correct tools, it is possible to remove the back plate in order to have access to the battery connection ports. In fact, Samsung themselves have said that there is a problem with specific tablets that can only be resolved in this manner. Users have reported that unplugging the battery and screen cords for 10 minutes and then connecting them back in has solved the problem. After that, you’ll want to charge the tablet for 2 hours before attempting to turn it on.

Check out the video instruction below for a more in-depth explanation.

8. Visit Samsung Store

It may be recommended to visit your local Samsung shop for repairs if all other options have failed. In certain cases, a faulty charging connector or even a dead screen may be the source of the problem.

Conclusion

In the hopes that one of these solutions will assist you in getting your Samsung tablet to charge once more, If any of these methods worked for you, please share your experience in the comments section below so that other people can benefit from your experience. Please contribute your own solutions as well, since I will be integrating them in forthcoming updates if they are good enough.

You might be interested:  How Much Are Samsung Earbuds

9 Ways To Fix It When Your Tablet Won’t Charge!

While your tablet just stops charging, even when it is plugged in, it does not necessarily indicate that it is time to replace it. When your tablet won’t charge, we’ll show you nine different ways to fix it! When it comes to charging Android tablets, the majority of the time the issue stems from either the charger or the charging port itself. Alternatively, if your tablet isn’t charging, you may put it in Airplane Mode and lower the brightness to extend the battery life while you try to figure out what’s wrong.

Make a copy of your files while you still have the opportunity, just in case the situation cannot be resolved. Here are a few easy actions you can take before bringing in the professionals or spending money on repairs.

Check to charge ports of your android tablet or smartphone:

Occasionally, the problem is with the charging pin of the tablet or smartphone, not the device itself. Keep an eye on it; it can tell if it’s bent or twisted. The connection on the charging cable must be able to accommodate the charging device properly. In order for all of the pins on the charger to be properly connected to the pins on the port. If your port has been damaged, it may be necessary to repair it, or the entire device may need to be replaced to restore functionality. You should also inspect the connector on the charging cable to ensure that the port is properly formed and is not damaged in any way.

Is your battery connection safe?

Check to see that there are no gaps and that the battery is flush with the mounting bracket. If this appears to be the case, remove the battery and inspect its connectors. A connection can get clogged with dirt, a section of the contact may become bent, or a connector may have gotten corroded due to corrosion. Rubble should be removed with a soft cloth, bent metal should be repositioned using a tiny pair of tweezers, and rust should be removed with a little quantity of a suitable cleanser. Simply ensure that the connection is completely dry before using the battery again.

Check/replace charging cable:

When used on a regular basis, charging cords may become faulty or out of date. As a result, it is recommended that you always use the device’s original charging cable or that you obtain a high-quality charging cable that will not damage your tablet or your adapter when charging.

Give the battery time to recover:

It is possible that a battery that looks to be dead has been deeply discharged. This indicates that the quantity of charge extracted from the battery was larger than the amount of charge the battery was meant to handle, and as a result, there is so little charge left in the battery that it looks to be dead. If a battery has suffered a severe discharge and can be resurrected, it is necessary to turn the device off completely and allow it to charge for a lengthy period of time (at least two or three hours).

Check/replace charging adapter:

Make sure that the charging adapter is in good functioning order because it is possible that the adapter is to blame for the problem with the charge. As a precaution, connect your charging cable/USB to another adaptor to ensure that you are not using a malfunctioning adapter. If your device charges regularly, this indicates that there is an issue with your adapter, and you must replace it at the earliest opportunity in order to resolve the situation.

Stop using the Tablet while it charges:

If your phone indicates that it is charging but the battery indicator does not appear to be moving, it is possible that you are using your phone excessively while it is charging. If you’re using your tablet while it’s plugged in to play games, use turn-by-turn navigation, or run any other power-hungry applications, your tablet may drain as rapidly as it charges. Android users may turn off their obnoxious app notifications.

Re-start tablet:

To restart a device is straightforward and may be accomplished by following the procedures outlined below:

  • Press and hold the power button on your tablet or smartphone for a long period of time. From the list of alternatives that appears on the screen, select either reboot or restart. You may also restart your tablet by pressing and holding the power button for around 10-15 seconds, which will cause the device to robotically reset.

Replace your battery:

When it comes to fixing your tablet charging problem, these should be your last resort, and you should only attempt to replace your battery if none of the previous methods prove successful.

Additionally, before purchasing and installing a new battery in your device, please contact with a specialist because different phones and tablets have varying battery needs.

When nothing works: Contact certified technicians:

You’ll need to consider the potential that your phone has been damaged or is malfunctioning if none of the alternatives listed above help you repair the problem. In this scenario, you’ll most likely need to call the manufacturer’s customer care line to arrange for shipping your phone for repair, or you’ll need to find a local tablet repair shop. According to the nature of the problem and whether or not your phone is still covered by warranty, you may have to pay for the repair — and be without your phone while it is being fixed — but in any case, it will be far less expensive than purchasing a new phone.

Tuesday-Saturday, 10:00am-8:00pm, Sunday-Sunday, 10:00am-8:00pm The hours on Sunday are 11:00pm–6:00pm.

If you are shipping a repair, please include your contact information.

Why is my tablet not charging when plugged in?

Asked in the following category: General The most recent update was made on April 27th, 2020. Problems with chargingAndroidtablets are notorious for becoming disconnected from either the charger or the charging port itself. Alternatively, if your tablet is not charging, switch it to Airplane Mode and decrease the brightness to extend the battery life while you attempt to resolve the issue. Make a copy of your files while you still have the opportunity, just in case the situation cannot be resolved.

  1. This does not necessarily imply that there is a problem in the port.
  2. Furthermore, is it possible to fix a charging port?
  3. Repairing the USB port on your own.
  4. Then, using anything as small as a toothpick, you may ‘lever up’ the small tab within the USB port of your smartphone or tablet.
  5. It is also possible to question, “How can I fix the charging port on my tablet?” as a result.
  6. Remove the back of the tablet and search for the connection to the charging port on the left side of the tablet.
  7. Can you tell me how to fix my Samsung tablet, which won’t charge or turn on?

Check to determine whether your Samsung tablet may be switched on once it has been charged. If you have an additional battery, plug it in to see if it can assist you identify whether or not your present battery is defective.

5 Ways to Fix a Samsung Tablet Not Charging

Is your Samsung tablet unable to be charged? What causes this problem to occur? The following article from MiniTool Partition Wizard explains why a Samsung tablet won’t charge when it is plugged in and how to resolve the problem.

Samsung Tablet Not Charging

As we all know, Samsung is one of the world’s largest makers of electrical products. It manufactures a wide range of devices, including solid state drives, smart phones, tablets, and personal computers, among others. Samsung is the largest manufacturer of Android tablets, and aside from Apple, there isn’t a lot of competition in this market segment. Samsung tablets, like any electrical goods, will experience certain problems from time to time, and they are no exception. Some customers have reported that they have had the problem of “Samsung tablet not charging when plugged in.” The following are the most typical causes for a Samsung tablet not charging:

  • A defective cable, charging block, charger cable, or adapter
  • A faulty charging block
  • The presence of dirt or particles in the charging port
  • Third-party applications that interfere with the charging process
  • It is necessary to do a software update.

Continue reading to learn how to resolve the “Samsung tablet does not charge when plugged in” problem and get answers. This post will demonstrate three distinct methods for taking a screenshot on a Samsung tablet. You can learn how to screenshot on a Samsung tablet by reading this text right now.

What to Do If Samsung Tablet Won’t Charge

First and foremost, if your Samsung tablet isn’t charging, make sure that all of the necessary hardware is in place. This includes the charger, the charging cable, and the charging port. Has anything happened to your charging block or charging cord that you should be aware of? Is the cable’s plug twisted or bent? Replace any broken parts, such as the charger or the cord, as soon as possible. If there is no visible physical damage, please try using another charger or another cable to see if the problem is resolved.

Whether this approach does not work, you should check to see if the charging port on your tablet has been clogged with dirt, dust, or other debris.

Having foreign items in your charging port might prevent your charging cable from properly attaching to the charging contacts if there are any present.

If you are unable to remove the debris, you should take the tablet to a professional for cleaning.

Fix 2. Does the Screen Display Waterdrop Icon?

If the smartphone’s screen shows a waterdrop icon, this indicates that water has been detected in the charging port of the device. This is because the Samsung tablet will not charge in this situation, which is a safety feature to keep the gadget safe from harm and corrosion. Then you should either let the gadget to dry on its own or gently blow into the charging port to expedite the drying process if necessary.

However, if the waterdrop indicator has not vanished after a few hours, you could try turning your tablet on and off several times. If the symbol persists, you may try deleting the cache for the USB device by doing the steps outlined below:

  • Navigate to theSettings menu. Tap theApps button
  • Then tap theOptions button. Show system applications by using the Show system applications button. Scroll down and press USBSettings
  • Then tapStorage
  • Then tapClear data andClear cache
  • And finally tapDone.

Activate the configurations; Tap theApps button; then tap theOptions button; then tap Done Show system applications by selecting Show system applications from the drop-down menu ( ). Select USBSettings from the drop-down menu, followed by Storage, Clear data and Clear cache.

Fix 3. Reset Samsung Tablet

If you are unable to locate a problem with the charger, cable, or port, you may choose to try this option. Despite the fact that this strategy appears strange, several people have claimed that it has been successful for them. As a result, I encourage you to give it a shot.

  • Remove the Samsung tablet’s charger from the wall outlet. For 30 seconds, press and hold the power button as well as the volume up button. Continue to hold the buttons when plugging in the charger
  • Continue to keep the buttons down for another 30 seconds if necessary. Only the power button should be released, with the volume button remaining pushed.

Fix 4. Update Software

If none of the approaches listed above are successful, you can try this one. Software updateDownload and install may be found in theSettingsapp by tapping it. If there are software updates available, select Install immediately from the drop-down menu.

Fix 5. Test Battery and Charger

If none of the procedures listed above are successful, please test the battery and charger to see whether they need to be replaced. The following is a step-by-step guide:

  • Open the Samsung Members app
  • Select Get assistance
  • Then select Interactive checks. To verify the hardware, choose Battery and Charger/USB from the drop-down menu.

Which is more suitable for you: a netbook or a tablet?

Samsung Tablet won’t Charge

When you possess an electronic gadget, one of the most annoying occasions is when the item runs out of battery power and cannot be used to aid you in your job anymore. Furthermore, when it won’t even charge, the issue becomes much more irritating. This is a problem that many Samsung tablet owners encounter on a regular basis. There have been several situations where the Samsung tablet will not charge or would display charging but will simply sit there and not charge even a little amount. So, what should you do if your Samsung tablet refuses to charge?

  • In this post, we’ll show you several options that you may attempt at home if your Samsung tablet won’t charge for any reason.
  • When your Samsung tablet won’t charge, use these steps to get it back up and running: It is not always necessary that there be an issue with your tablet in order for it to function properly.
  • This is a relatively typical issue and can be cured by just changing the charging cord by obtaining a new one.
  • In order to check for this, you should try a different outlet or see whether there is any electricity flowing through the outlet before putting in your charger.

Samsung Tablet won’t Charge |Perform a forced power cycle

Sometimes your tablet’s battery will get frozen, and you will need to execute a forced power cycle in order to restore the battery to its original operating state. To aggressively execute a power cycle on your tablet, you must entirely drain the battery of the device. There shouldn’t be enough juice left to even show the power-up screen, let alone run the computer. After that, put in the charger and let it like that for 4-5 hours to charge. As a result, your tablet’s battery will become more receptive to power, and your Samsung tablet will begin to recharge.

Correcting any incorrect system settings that may be blocking your tablet’s battery from charging will be accomplished in this manner.

Most of the time, resetting your tablet to its factory settings will give an effective solution to your issue.

If none of the options above were successful in providing you with a solution, you should immediately bring your Samsung tablet to your local The FIX shop and receive expert assistance with your tablet there.

It will be our pleasure to assist you and give you with a suitable solution to your concerns. Please contact us at The FIX for more information.

Leave a Reply

Your email address will not be published. Required fields are marked *