How To Replace Water Filter In Samsung Fridge

Contents

Replace the water filter in your Samsung refrigerator

There are three different types of Samsung water filters, so you’ll want to be sure you’re getting the right one for your refrigerator before purchasing one. Replacement filters are available for purchase on ouraccessories page if needed. To begin, identify the filter in your refrigerator’s model. You should refer to your user handbook if you are unclear about the location. Then, on the filter itself, look for the model number printed on it. This will inform you of which of the following filter types you will require for your application.

If you’re not sure whether or not you need to replace the filter, look for an indication light on your refrigerator.

If you are about to replace the filter, the light will become purple to indicate that it is time.

You should alter the filter as soon as possible at this point.

  1. After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance. Once you have unlocked the old water filter, remove its lid and swivel it counterclockwise to reinstall it. Afterwards, just pull it straight out of the filter housing to remove it. Prior to placing the new filter in the system, remove the protective cover from the top of the existing filter. Afterwards, insert it directly into the filter housing and turn it counter-clockwise
  2. Examine to ensure that the lock symbol corresponds to the indication line.

Types of HAFCU1 filters include:

  1. After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance. Using a left-handed twist, you can remove the old filter. This will allow you to access it
  2. Afterwards, pull it downward to remove it from the filter housing. The replacement filter should be inserted by pushing it up into the filter housing and then turning it to the right. Check to ensure that the notch at the top of the filter corresponds to the arrow on the filter’s housing. Replace your filter and then flush it thoroughly with a few liters of water to wash out any contaminants or air that may have gotten into it. Then, make sure that the water filter light on your refrigerator is turned back on. Please refer to the following sections for further information.

After turning off the water, locate the filter and clean it as necessary. You should reference your user manual if you are unclear of where it is located. Using a left-hand twist, you may remove the old filter. Upon doing so, it will be unlocked. Afterwards, pull it down to release it from the filter housing. Using your fingers, press the new filter upwards and then to the right; this will ensure that it is properly installed. To avoid clogging the filter, make sure it has a notch at the top that matches the arrow on the housing.

Then, make sure that the water filter light on your refrigerator is turned off and back on again.

  1. If theFilter Resetbutton is accessible on the control panel, locate it and press it. In some cases, it is a secondary function of another button on the panel
  2. Once identified, press and hold the proper button for 3 seconds until the light turns out
  3. The filter symbol will either turn off or return to its usual color when the light is turned off. This restarts the timer for the next six months.

Please keep in mind that some models may require you to press two buttons at the same time in order to reset the light. Touch screen models will instead make use of on-screen menus. Consult your refrigerator’s owner’s handbook for detailed operating instructions. The water filter light and timer on your Family Hub refrigerator may be reset by following the instructions outlined below.

  1. Start by selecting Apps from the Home screen, followed by Fridge Manager
  2. Then choose Water Filter from the Home screen, followed by Reset and then Proceed. The filter light and timer will be reset as a result of this. If you require a Samsung water filter, you may purchase one by pressing the Buy Filter button after tapping the water filter symbol.

On models RF4289 and RSG309, you may also reset the filter light by pressing the reset button.

  1. Then, at the bottom of the screen, navigate to and pick theSettingsicon, and then tapWater Filter to begin. As soon as the Water Filter menu appears, press Next three times in the lower right corner of the screen until you reach page 4/4 of the Water Filter menu. Hold the object with your fingertips. Remove and reinstall the water filter until it changes its status, which may be done in the middle of the display. After the message “Filter Replaced” appears and disappears from the screen, tapSave in the lower right corner of the screen.

In order to define what is filtered by a water filter, the National Sanitation Foundation (NSF) and the American National Standards Institute (ANSI) have developed a variety of standards. Samsung’s water filters are Carbon Filters that meet the requirements of the NSF/ANSI 42, NSF/ANSI 53, and NSF/ANSI 401 standards, among other requirements. NSF/ANSI 42 is a standard for food safety and sanitation.

  • Filtered to decrease the presence of aesthetically objectionable contaminants like as chlorine and taste/odor

NSF/ANSI 53 is a standard that specifies how a product should be designed, manufactured, and tested.

  • Certified to decrease a pollutant that has a negative impact on health. The following substances have been identified as having negative health effects by the United States Environmental Protection Agency (EPA) and Health Canada: Asbestos, Atrazine, Benzene, 2, 4-D, Carbofuran, Chlorbenzene, Cyst (99.99 percent), Endrin, Ethylbenzene, Lead, Lindane, Mercury, O-Dichlorobenzene, P-Dichlorobenzene, Tetrachloroethylene, Toxaphene

NSF/ANSI 401 is a standard for food safety and sanitation.

  • It has been proven to lower one or more of the 15 emerging pollutants in drinking water by at least 50%. Pharmaceuticals and chemicals that are not yet controlled by the Environmental Protection Agency or Health Canada include: atenolol, bisphenol A, carbamazepine, DEET, estrone, linduron, nonylphenol, phenytoin, trimethoprim, and trimethoprim sodium.

Check out our troubleshooting guide for assistance if you are having difficulties installing the water filter in your refrigerator.

How to Change the Water Filter on a Samsung Refrigerator

You’ve been ignoring the Change Water Filter Indicator on your Samsung refrigerator for a little bit longer than you should have. If this is the case, don’t waste any more time! Follow these simple step-by-step directions to learn how to replace the water filter in your Samsung refrigerator. It is critical to change your Samsung water filter on a regular basis for the health of your family and your refrigerator! A clean water filter installed in your Samsung french door, four flex, or side-by-side refrigerator may make a significant impact in the quality of your drinking water and food preparation.

Step-by-Step: How to Change the Water Filter on a Samsung Refrigerator

If you don’t have technical skills, changing your water filter is a breeze thanks to a Samsung design. You can begin by following the steps outlined in this document.

Step 1: Purchase the Correct Samsung Water Filter

We strongly advise you to get the Samsung Factory Water Filter. If at all possible, stay away from knock-off brands. Although they are less expensive, the quality is not similar. The Samsung Factory Water Filter may be purchased online through Amazon, with most items shipping the same day on conventional Prime or free 2-hour delivery on Prime Now, depending on the product. We encourage that you sign up for the Amazon Subscribe and Save program in order to save money on future purchases. To ensure that you never have an out-of-date water filter again, schedule your water filter to be delivered automatically every five months.

You might be interested:  Who Makes Samsung Refrigerators

Step 2: Verify you have the right part!

Refrigerator water filters are model number specific, which means that you must use the exact filter for your refrigerator and not just any water filter. WARNING: Before opening the package, double-check that you have the appropriate filter. It is not possible to return the water filter once it has been installed. The water filter component number DA29-00020B (shown below) is used in the majority of Samsung french door, four flex, and side-by-side refrigerators; nevertheless, it is important to check the refrigerator model number to ensure that you are purchasing the proper filter for your product.

See the following specifications for further information: Your Samsung water filter will be sent with a new water filter, an instruction manual, and sticker reminders for the filter’s expiration date.

Step 3: Locate the Samsung Water Filter on Your Refrigerator.

The position of the water filter is determined by the setup of your Samsung refrigerator. French DoorsFour Flex models have a water filter that is situated between the produce drawers and the French DoorsFour Flex models’ fresh food area (as pictured below).

Samsung side-by-side refrigerators are equipped with a water filter, which is positioned on the fresh food side of the bottom drawer on the right-hand side of the unit.

Step 4: Prepare the Filter for Installation

Simple removal of the plastic wrapping and removal of the top cap are all that is required to ready the filter for installation. A well designed filter will look something like this.

Step 5: Install the Samsung Water Filter

Installing the water filter is accomplished by turning the filter knob to the left. It takes approximately 1/4 turn to unlock the filter. If possible, you should be able to remove the filter without having to switch off the water supply. To release the filter, slowly move the refrigerator forward and switch off the main water supply. In order to install the replacement filter, screw it into place with a quarter-clockwise turn. When the filter is locked in place, you may hear a pressure noise, which is completely normal.

Step 6: Purge 1 Gallon of Water

1 gallon of water should be sent through the filter. For the first 3-5 seconds, you may hear some air in the lines. This is quite normal. Remove the water from the container. It’s now time to put your water dispenser to work!

Step 7: Reset the Change Water Filter Indicator

By pressing and holding the Crushed Ice button for three seconds, you may reset the Change Water Filter Indicator light. Do you need assistance with the water dispenser or ice maker on your Samsung refrigerator? For Samsung Certified Care on your refrigerator, get in touch with Unique Repair Services.

Samsung 6-Month Push-In Refrigerator Water Filter Lowes.com

Prices, promotions, styles, and availability are subject to change without notice. We do not honor online prices at any of our local locations. Prices and availability of products and services are subject to change at any time and without prior notification. If any mistakes are discovered, they will be addressed, and Lowe’s has the right to rescind any advertised offer and rectify any errors, inaccuracies, or omissions, even after an order has been submitted, without prior notice.

  • In addition to removing up to 99 percent of impurities, high-grade carbon block safeguards the inside components of your refrigerator against possible silt. The filter can remove up to 80 percent more pollutants than other leading suitable filters
  • And Warning: Samsung will not cover any damage caused by a non-genuine Samsung filter under the terms of its warranty.
  • You can pause or cancel at any time. Find Out More
  • 3 months, 6 months, 9 months, and 12 months are all possible.

OVERVIEW

With this Samsung refrigerator water filter for your Samsung French Door and Side-by-Side refrigerators, you’ll be able to drink water that tastes better than ever. In addition to lead and mercury, chlorine, DEET, medicines, herbicides, and pesticides are all reduced by the ultra-high-grade carbon block from Samsung. With a 6-month life span and a small design, this Samsung refrigerator water filter provides long-lasting usage while also being simple to install and maintain.

  • In addition to removing up to 99 percent of impurities, high-grade carbon block safeguards the inside components of your refrigerator against possible silt. The filter can remove up to 80 percent more pollutants than other leading suitable filters
  • And Warning: Samsung will not cover any damage caused by a non-genuine Samsung filter under the terms of its warranty. Standard 42, 53, and 401 of the National Sanitation Foundation (NSF) are recognized for their ability to remove up to 99 percent of certain chemicals, medicines, pesticides, and herbicides, as well as heavy metals. There is no removal of minerals that are potentially advantageous to health. The tank has a capacity of 300 gallons. DA29-00020B is the replacement code.

Specifications

Prop 65 is a warning to California residents (s) Compatible with top-freezer refrigeratorsBrand and model compatibility Samsung Particulates are filtered out (Class I) Refrigerators that are side-by-side are compatible with this product. It is designed to fit bottom-freezer refrigerators. It is designed to fit French Door Refrigerators. P-Dichlorobenzene is a chemical that is filtered. Reduces the taste and odor of chlorine.

Samsung Fridge Filters: Easy-Guide to Replacing, Resetting and Changing.

Samsung is one of the most successful corporations in the world today. The South Korean technology corporation, which has its headquarters in Seoul’s Samsung Town, was initially started as a trade company, but it entered the electronics sector in the 1970s after expanding into other markets. Samsung declared in 2015 that it intended to surpass General Electric as the world’s largest appliance manufacturer. To achieve this, as you might expect, the company had to outperform numerous well-known global corporations, like Whirlpool, Bosch, and Electrolux, among others.

  • Samsung’s collection of home appliances will feature refrigerators that supplied sparkling as well as still, filtered drinking water, making them far more sophisticated than anything else that other household manufacturers were manufacturing at the time.
  • Samsung is unquestionably one of the world’s biggest appliance manufacturers, despite the fact that they are not exactly at the top of the scoreboard that has just been established.
  • One of the reasons water tastes so much better when it comes out of a Samsung refrigerator is due to the superior filtering system that the refrigerator has installed.
  • It is critical that you update your Samsung water filter on a regular basis if you want to continue drinking wonderful water at home.
  • This will result in terrible tasting drinks that you will be embarrassed to give your friends and family.

We’ve put together a simple tutorial on everything you need to know about replacing your Samsung fridge filter at home so that you can continue to be proud of your great beers, clean water, and crystal-clear ice.

1. How to replace RSG5UCRS Samsung Fridge Filter:

When it comes to replacing your RSG5UCRS Samsung Fridge Filter, we have some good news for you: it’s more simpler than you would imagine. When the filter indicator light becomes orange or pink, it indicates that a new filter should be purchased. When the filter indicator becomes red, it is time to replace it. If six months have passed and the indication light has not gone red, we nonetheless recommend that you replace the filter in order to preserve the excellent quality of your drinking water at all times.

Only internal filters should be replaced according to the procedures provided below.

  1. The old water filter may be removed by turning it 45 degrees to the left to open it
  2. At this point, gently remove the old water filter and toss it away
  3. The water will stop off automatically at this time. Insert the new water filter into the available area and rotate it 45 degrees to the right
  4. If the padlock symbol on the filter corresponds to the sign on the filter, the filter is in the proper position. Immediately following the installation of the new filter, push the water filter reset button for three seconds to reset the light indicator.

Suggestions for improvement In the event that you are having difficulty removing the water filter, it is possible that there is excessive water pressure behind the filter. Remove the top two refrigerator shelves and use a stronger pull on the filter to get it out. If you are unable to squeeze the new filter into the available area, turn off the water supply valve and dispense a little amount of water. As a result, the pressure will be reduced, making it easier to install the new filter. All of the steps that follow are for external filters only.

Instructions on how to change an internal filter may be found further up the page.

  1. Immediately turn off the water supply
  2. Remove the old cartridge from the system and dispose of it properly
  3. The water filter should be positioned such that it flows in the direction of the refrigerator
  4. The inlet and exit tubing should be connected to the proper end of the filter by firmly inserting the tube all the way into the filter until it is snugly shut
  5. Check to see that the tube is square and free of scratches – you may trim it if required. The filter clip should be installed according to the directions in the installation manual. Make sure there are no leaks in the filter by turning on the water. Re-do the installation processes and check again whether there are any leaks. If the leaks continue, remove the filter and contact customer service. Allow water to circulate through the filter for five minutes in order to clean the entire system.
You might be interested:  How To Remove Samsung Free

2.How to Replace a DA29-00003F Water Filter

The DA29-00003F water filter is a replacement for the DA29-00003G, DA29-00003B, and DA29-00003A water filters, among others. In no way is it a substitute for the superior DA29-00003G filter, nor is it compatible with that more sophisticated filter. The replacement of an internalDA29-00003F water filter is described in the following instructions.

  1. The old water filter may be removed by turning it 45 degrees to the left to open it
  2. Gently take it out and throw it away — this will cause the water to cut off automatically
  3. To install the replacement water filter, insert it and rotate it 45 degrees to the right to secure it in place
  4. If the padlock sign on the water filter corresponds to the symbol on the water filter, you have completed the task successfully. To reset the water filter indication, press and hold the water filter reset button for three seconds.

Suggestions for improvement In the event that you are having difficulty removing the water filter, it is possible that there is excessive water pressure behind the filter. Remove the top two refrigerator shelves and use a stronger pull on the filter to get it out. If you are unable to squeeze the new filter into the available area, turn off the water supply valve and dispense a little amount of water. As a result, the pressure will be reduced, making it easier to install the new filter.

3. How to Reset the Water Filter Indicator Light on a Samsung Fridge

In addition to the water filter, every Samsung refrigerator that has one has a water filter indicator that tells you when it’s time to replace the water cartridge. The filter should be replaced once every six months regardless of whether or not the light changes color. This will ensure that you continue to drink the high-quality water that you have come to appreciate. If you don’t change your water filter on a regular basis, it won’t function properly. Instead of drinking great-tasting, pure water, you’ll be forced to drink strange-tasting water that may contain unwelcome contaminants.

Blue indicates that your water filter is performing properly.

Red:Your water filter has reached the end of its useful life and it is time to replace it with a new one.

By pressing and holding the “Alarm / Hold for 3 seconds to Reset Filter” button for three seconds, you can reset the indicator light.

If your model has an interior control panel, press and hold the “Power Cool” and “Fridge” buttons for three seconds at the same time. This will return the indicator light to its original blue state.

4. How to Replace a DA29-00003G Samsung Fridge Filter

Instructions for internal filters are provided in the next section. The Samsung DA29-00003G water filter is always installed from inside the device itself.

  1. To remove the old water filter, twist it a quarter turn to the left to free it
  2. Then lift it out. Gently remove the old water filter and throw it away
  3. This will cause the water to be switched off automatically. Insert the new water filter and rotate it by a quarter turn to the right until it is secure. If the padlock sign on the water filter corresponds to the symbol on the water filter, you have successfully installed it. The water filter indication should be reset after installation by pressing the water filter reset button for three seconds after completion.

Suggestions for improvement In the event that you are having difficulty removing the water filter, it is possible that there is excessive water pressure behind the filter. Remove the top two refrigerator shelves and use a stronger pull on the filter to get it out. If you are unable to squeeze the new filter into the available area, turn off the water supply valve and dispense a little amount of water. As a result, the pressure will be reduced, making it easier to install the new filter.

5. Why You Need to Change Your Fridge Filter Every 6 Months

You might believe that you only need to change your refrigerator filter when the indicator light indicates that you should – but this is not the case. In some cases, waiting until the light goes red might be harmful to your health. A water filter prevents pollutants from flowing through the pipes and into your drinking water supply. When the water filter is no longer functional, all of the impurities that have been caught can now pass through into your drinking water, making it even worse than if you had not used a water filter at all.

Each Samsung water filter contains activated carbon filter material that has been approved for usage with a specific amount of water before the cartridge has to be replaced.

By absorbing impurities from water, activated carbon serves as a filter for such contaminants.

This occurs when there is no more surface area available for the absorption of additional pollutants and the filter’s capacity has been achieved.

How To Change Your Samsung Fridge Water Filter

Samsung refrigerators are among the most popular models on the Australian market. Homeowners like the built-in usefulness of their cabinets because of the diverse selection of functions and styles available. On a daily basis, the Samsung refrigerator filter supplies your family with clean, fresh, filtered water and ice. Each Samsung water filter has a lifespan of around six months, however some may need to be replaced sooner if they are used often or if the water is exceptionally harsh. The fact that your Samsung refrigerator’s filter indication light has begun to illuminate indicates that it is time for you to replace your old filter with a new one.

Where Is the Water Filter on My Samsung Fridge?

In order to purchase a new Samsung water filter, you must first determine the model of Samsung water filter you currently own. You will be able to purchase the appropriate replacement because of this. Discount Fridge Filters assists clients in locating the appropriate filter for their refrigerators depending on the model number of the refrigerator. Other brands of refrigerator filters may be used to replace the filter in a Samsung refrigerator and perform just as well; however, you must know the model number of your refrigerator in order to obtain suitable fridge filters.

If you are having trouble identifying the model number of your Samsung water filter, you may watch the video below.

It is possible for your water filter to be installed in three different locations.

In some versions, the water filter will be located on the top right inside or at the back of the refrigerator. If you are unable to locate your water filter or identify the model number of your refrigerator, you can always get in touch with us at Discount Fridge Filters for assistance.

Do You Have To Turn Water Off To Change Your Samsung Refrigerator Filter?

Samsung refrigerators with internal filters are equipped with an auto shut off valve, which eliminates the need to turn off the water to change the filter. Because customers have experienced installation issues as a result of shutting off the water, causing air locks and other issues, we do not recommend shutting off the water supply. When customers turn the water supply back on, they may experience sputtering water or even no water coming out of the faucet. Samsung refrigerators with external filters, on the other hand, nearly usually require the water to be turned off before the filters can be swapped out or replaced.

If this is the filter you require, turning off the water supply is a critical step in ensuring that you do not have a flood of water from this connection when changing your filter.

However, reducing pressure by dispensing some water is usually always a preferable choice.

How To Change An Internal Water Filter on a Samsung Refrigerator

Determine the placement of the water filter in your refrigerator. 2. Remove the old filter by lifting the protective cover (if your filter type has one) and turning it counter-clockwise to dislodge it. Alternatively, if it is difficult to lift, it is possible that pressure has built up; dispense some water and try to relax it before tugging it again. 3. Take your new filter out of the packing and remove the protective cover from it. 4. Press in the new filter and spin it clockwise until its lock symbol is aligned with the arrow.

  • Replace the old filter.
  • Replace the filter cap, if your filter type has one, and run several litres of water to confirm that the water has been adequately filtered and that any air has been drained out of the line.
  • This assures that there will be no leaks in the future.
  • Reset the filter-indicator light on the inside of your refrigerator.
  • The indicator light should return to its original state of green.
  • You may also go to the user manual that came with your Samsung refrigerator for complete instructions on how to change the water filter and reset the indication light on the refrigerator.
You might be interested:  How To Check Screen Time On Samsung

How To Change An External Water Filter on a Samsung Refrigerator

1. Locate the isolation valve, which should be situated somewhere along the water supply line to the refrigerator. Turn it off if it’s on. Using the water outlet located near the refrigerator, depressurize the system by drawing a large glass of water. 2. Have a bucket and a towel handy in case there is a tiny amount of water spilled throughout the operation. The old filter should be removed by depressing the locking collars at either end of the filter with your thumb nail (or something similar) while simultaneously pulling out the water supply line from the filter.

  • It is possible to hold down the locking collar with your fingers or with a solid edged item, which will allow the hose to slip out with relative ease.
  • We recommend that you use a sharp object, such as a Stanley knife.
  • 4.
  • For this, you may either place the filter under a running faucet and let the water to flow directly into a sink, or you can submerge the filter in a bucket or other container of water.
  • 5.
  • The line will go in approximately 5 – 10mm and you will be able to fully put the filter into place.
  • After you’ve placed the filter in the bucket, switch on the water supply and allow approximately 5 litres of water to run through the filter and into the container.

After you have turned off the water supply, connect the line that flows into the refrigerator.

7.

8.

If the filter light on your Samsung refrigerator does not come back on, press and hold the “Ice Type” or “Moisture Control” buttons as well as the Child Lock button for three seconds.

Avoid holding the buttons for an excessive amount of time, since this may force the procedure to restart, requiring you to release all of the buttons and hold them again until the light changes to green again.

You may also go to the user manual that came with your Samsung refrigerator for complete instructions on how to change the water filter and reset the indication light on the refrigerator.

Can I Run My Samsung Refrigerator Without the Water Filter?

Water filters are designed to eliminate toxins such as lead, mercury, chlorine, and other contaminants from your drinking water and ice, among other things. The majority of Samsung refrigerators may still work well even if they do not have a water filter installed. In spite of the fact that rotary valves in your refrigerator may bypass the water filter and provide you with water even when there isn’t a water filter installed, this does not imply that you should continue to use your Samsung refrigerator in this manner.

At first, you may be unsure about how to replace your water filter.

In the event that you do not change your old filter after 6 months, you may face mineral buildup, which may result in your refrigerator experiencing costly malfunctions.

Tips on How to Change Your Samsung 3G 3F Filter Head Alignment

A misaligned head of a Samsung 3G 3F water filter might cause difficulties if the filter is used. If you have a Samsung 3G 3F water filter, you may face problems if the head gets misaligned. We have covered the basics of this straightforward repair procedure in a few steps. You may quickly correct the alignment of your water filter by watching the video provided below.

Where Can I Buy a Samsung Refrigerator Water Filter?

At Discount Fridge Filters, we can assist you in selecting the appropriate filter and ensuring that it is compatible with the Samsung refrigerator model that you have purchased. On the market, there are many different types of water filters to choose from, and you can save money by selecting one from our extensive inventory. Please do not hesitate to contact us at any time if you want assistance in selecting the appropriate water filter. We would be pleased to answer any questions you may have and to provide you with guidance on how to go about installing it.

How to Install Samsung Refrigerator Water Filter DA29-00020A

You’re thinking of replacing your own water filter, right? That’s a great concept! Replacing your refrigerator water filter on your own may save you a significant amount of time and money. Let’s get started. The entire procedure should take no more than 10 minutes if everything is done correctly. First and foremost, you’ll want a replacement air filter for your system. Replacing water filters may be obtained from a variety of sources, including your local appliance parts store, Lowe’s, or an internet vendor such as Amazon.com.

The steps outlined below illustrate how to replace the Samsung Refrigerator Water Filter DA29-00020B in your refrigerator.

WF294 is a generic water filter manufactured by AquaFresh that has been utilized in this illustration. This filter is also compatible with a limited number of Kenmore refrigerators (see below). More SamsungKenmore filter choices may be found here.

How to Change Samsung Water Filter DA29-00020B

Step 1: Locate the model number of your refrigerator. Model numbers are situated within the refrigerator, most frequently on the left side wall of the appliance. The following are examples of Samsung refrigerator models that are compatible with the DA29-00020B filter: Fits Refrigerators from Samsung

  • RSG307AARS
  • sRF23J9011SR
  • sRS261MDWP
  • sRS267TD
  • sRF4287HARS/XAA
  • sRS265TDRS
  • sRS261MDBP
  • sRS261MDRS
  • sRFG298HDRS

Before purchasing a water filter, double-check that the model number of your refrigerator is compatible with the filter you’re considering. It is really helpful when purchasing appliance filters on Amazon to utilize the model number checker (find the Model Number Checkerunder the main menuwhen purchasing parts). Step 2: Determine the location of your water filter housing. The water filter housing will have the appearance of a knob. There are two possible locations for this component: either inside of the refrigerator section near the crispers, or on the outside of it at the toe grille.

  1. The third step is to turn off the water supply.
  2. Carefully pull the refrigerator forward in order to gain access to the water shutoff valve located at the rear of the unit.
  3. Step 4: Discard the previous filter.
  4. The old filter should be disposed of after it has been removed using a knob-style cap.
  5. The knob-style cap should be placed on the rear of the new filter.
  6. The filter should be replaced by twisting the knob counterclockwise until it is secure.
  7. Step 6: Reconnect the water supply.

7.

For a few seconds, you may notice that the water sputters a little.

You’re now ready to take a drink.

Press and hold the water filter reset button for 3 seconds to reset the water filter.

With Your Subscription, You’ll Save $15 on Labor.

Samsung Refrigerator Water Filter – Best Buy

The importance of drinking enough of water and staying hydrated is a significant component of living a healthy lifestyle. Make certain that your drinking water complies with health regulations and is comfortable to consume. When you use the Insignia NS-SSHQ532 NSF 42/53 Water Filter Replacement for Samsung HAF-QIN (2 Pack), you can be certain that your water is free of mercury, lead, and other hazardous impurities while remaining crystal clear. This filter, which is NSF approved, also filters chlorine, allowing you to enjoy fresh tasting water for up to six months or 316 gallons (1,196 L).

Water should be treated solely for pollutants in order to maintain its fresh, clean and healthy taste.

* Models of refrigerators that are compatible with this product include: RF23M8570SR/AA, RF23M8590SG/AA, RF28R7351SG/AA, RF28R7201SG/AA, RF22R7351SG/AA, RF24R7201SG/AA, RF23M8070SR/AA, RF23M8090SG/AA, RF23M8090SR/AA, RF23M8090SR/AA,

How To Replace The Samsung Food Showcase Water Filter

Water and ice dispensers are included in the Samsung Food Showcase refrigerator, and the dispensers are fitted with an impressive filtering function. It improves the flavor, eliminates the odor, and removes particles from the food. This guarantees that every pore in your body receives clean and fresh taste water. The filter indication light on the refrigerator panel allows you to keep track of how much filter is being used. Whenever the filter indicator is either blue or green, this indicates that your filter has at least 90 percent of its usable life left in it.

This warning indicates that you should change your water filter before the signal turns red.

When it comes time to install a new water filter, the HAF-CIN Refrigerator Water Filter (HAF-CIN/EXP) should be used instead of the standard water filter.

Make sure that the water supply to your refrigerator is turned off before you begin removing the old water filter.

A cloth or dish will come in helpful when you need to remove the filter from the machine.

Remove the old cartridge by slowly turning it counter clockwise a quarter of the way and removing it.

Insert the replacement filter cartridge so that the lock sign is pointing to the left on the side of the machine.

When you’ve finished filling the cartridge, press the stop and lock icon.

Replenish the water supply and dispense the water for approximately 6 minutes, or approximately 3 gallons, to thoroughly flush the system.

The last step is to open up the refrigerator door and check for any leaks around the filter area.

We recommend that you only use authentic Samsung replacement water filters, which can be acquired at authorized Samsung service locations, to ensure the highest quality.

Leave a Reply

Your email address will not be published. Required fields are marked *