How To Change Filter On Samsung Fridge

Contents

Replace the water filter in your Samsung refrigerator

There are three different types of Samsung water filters, so you’ll want to be sure you’re getting the right one for your refrigerator before purchasing one. Replacement filters are available for purchase on ouraccessories page if needed. To begin, identify the filter in your refrigerator’s model. You should refer to your user handbook if you are unclear about the location. Then, on the filter itself, look for the model number printed on it. This will inform you of which of the following filter types you will require for your application.

If you’re not sure whether or not you need to replace the filter, look for an indication light on your refrigerator.

If you are about to replace the filter, the light will become purple to indicate that it is time.

You should alter the filter as soon as possible at this point.

  1. After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance. Once you have unlocked the old water filter, remove its lid and swivel it counterclockwise to reinstall it. Afterwards, just pull it straight out of the filter housing to remove it. Prior to placing the new filter in the system, remove the protective cover from the top of the existing filter. Afterwards, insert it directly into the filter housing and turn it counter-clockwise
  2. Examine to ensure that the lock symbol corresponds to the indication line.

Types of HAFCU1 filters include:

  1. After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance. Using a left-handed twist, you can remove the old filter. This will allow you to access it
  2. Afterwards, pull it downward to remove it from the filter housing. The replacement filter should be inserted by pushing it up into the filter housing and then turning it to the right. Check to ensure that the notch at the top of the filter corresponds to the arrow on the filter’s housing. Replace your filter and then flush it thoroughly with a few liters of water to wash out any contaminants or air that may have gotten into it. Then, make sure that the water filter light on your refrigerator is turned back on. Please refer to the following sections for further information.

After turning off the water, locate the filter and clean it as necessary. You should reference your user manual if you are unclear of where it is located. Using a left-hand twist, you may remove the old filter. Upon doing so, it will be unlocked. Afterwards, pull it down to release it from the filter housing. Using your fingers, press the new filter upwards and then to the right; this will ensure that it is properly installed. To avoid clogging the filter, make sure it has a notch at the top that matches the arrow on the housing.

Then, make sure that the water filter light on your refrigerator is turned off and back on again.

  1. If theFilter Resetbutton is accessible on the control panel, locate it and press it. It is occasionally used as a supplementary purpose for another button on the panel
  2. For example, Once you’ve found the proper button, press and hold it for three seconds to bring the light back on. When the filter icon is reset, it will either turn off or revert back to its original color depending on the setting. This restarts the timer for the next six months.

Please keep in mind that some models may require you to press two buttons at the same time in order to reset the light. Touch screen models will instead make use of on-screen menus. Consult your refrigerator’s owner’s handbook for detailed operating instructions. The water filter light and timer on your Family Hub refrigerator may be reset by following the instructions outlined below.

  1. Start by selecting Apps from the Home screen, followed by Fridge Manager
  2. Then choose Water Filter from the Home screen, followed by Reset and then Proceed. The filter light and timer will be reset as a result of this. If you require a Samsung water filter, you may purchase one by pressing the Buy Filter button after tapping the water filter symbol.

On models RF4289 and RSG309, you may also reset the filter light by pressing the reset button.

  1. Then, at the bottom of the screen, navigate to and pick theSettingsicon, and then tapWater Filter to begin. As soon as the Water Filter menu appears, press Next three times in the lower right corner of the screen until you reach page 4/4 of the Water Filter menu. Hold the object with your fingertips. Remove and reinstall the water filter until it changes its status, which may be done in the middle of the display. After the message “Filter Replaced” appears and disappears from the screen, tapSave in the lower right corner of the screen.

In order to define what is filtered by a water filter, the National Sanitation Foundation (NSF) and the American National Standards Institute (ANSI) have developed a variety of standards. Samsung’s water filters are Carbon Filters that meet the requirements of the NSF/ANSI 42, NSF/ANSI 53, and NSF/ANSI 401 standards, among other requirements. NSF/ANSI 42 is a standard for food safety and sanitation.

  • Filtered to decrease the presence of aesthetically objectionable contaminants like as chlorine and taste/odor

NSF/ANSI 53 is a standard that specifies how a product should be designed, manufactured, and tested.

  • Certified to decrease a pollutant that has a negative impact on health. The following substances have been identified as having negative health effects by the United States Environmental Protection Agency (EPA) and Health Canada: Asbestos, Atrazine, Benzene, 2, 4-D, Carbofuran, Chlorbenzene, Cyst (99.99 percent), Endrin, Ethylbenzene, Lead, Lindane, Mercury, O-Dichlorobenzene, P-Dichlorobenzene, Tetrachloroethylene, Toxaphene

Obtaining certification for the reduction of a pollutant that has a negative impact on health The following contaminants have been identified as having negative health effects according to the Environmental Protection Agency (EPA) and Health Canada: Asbestos, Atrazine, Benzene, 2, 4-D, Carbofuran, Chlorbenzene, Cyst (99.99 percent), Endrin, Ethylbenzene, Lead, Lindane, Mercury, O-Dichlorobenzene, P-Dichlorobenzene, Tetrachloroethylene, Toxaphene,

  • It has been proven to lower one or more of the 15 emerging pollutants in drinking water by at least 50%. Pharmaceuticals and chemicals that are not yet controlled by the Environmental Protection Agency or Health Canada include: atenolol, bisphenol A, carbamazepine, DEET, estrone, linduron, nonylphenol, phenytoin, trimethoprim, and trimethoprim sodium.

Check out our troubleshooting guide for assistance if you are having difficulties installing the water filter in your refrigerator.

How to Change the Water Filter on a Samsung Refrigerator

You’ve been ignoring the Change Water Filter Indicator on your Samsung refrigerator for a little bit longer than you should have. If this is the case, don’t waste any more time! Follow these simple step-by-step directions to learn how to replace the water filter in your Samsung refrigerator. It is critical to change your Samsung water filter on a regular basis for the health of your family and your refrigerator! A clean water filter installed in your Samsung french door, four flex, or side-by-side refrigerator may make a significant impact in the quality of your drinking water and food preparation.

Step-by-Step: How to Change the Water Filter on a Samsung Refrigerator

If you don’t have technical skills, changing your water filter is a breeze thanks to a Samsung design. You can begin by following the steps outlined in this document.

You might be interested:  When Did The Samsung S20 Come Out

Step 1: Purchase the Correct Samsung Water Filter

We strongly advise you to get the Samsung Factory Water Filter. If at all possible, stay away from knock-off brands. Although they are less expensive, the quality is not similar. The Samsung Factory Water Filter may be purchased online through Amazon, with most items shipping the same day on conventional Prime or free 2-hour delivery on Prime Now, depending on the product. We encourage that you sign up for the Amazon Subscribe and Save program in order to save money on future purchases. To ensure that you never have an out-of-date water filter again, schedule your water filter to be delivered automatically every five months.

Step 2: Verify you have the right part!

Refrigerator water filters are model number specific, which means that you must use the exact filter for your refrigerator and not just any water filter. WARNING: Before opening the package, double-check that you have the appropriate filter. It is not possible to return the water filter once it has been installed. The water filter component number DA29-00020B (shown below) is used in the majority of Samsung french door, four flex, and side-by-side refrigerators; nevertheless, it is important to check the refrigerator model number to ensure that you are purchasing the proper filter for your product.

It is recommended that you replace your Samsung water filter after 300 gallons or 6 months. See the following specifications for further information: Your Samsung water filter will be sent with a new water filter, an instruction manual, and sticker reminders for the filter’s expiration date.

Step 3: Locate the Samsung Water Filter on Your Refrigerator.

The position of the water filter is determined by the setup of your Samsung refrigerator. French DoorsFour Flex models have a water filter that is situated between the produce drawers and the French DoorsFour Flex models’ fresh food area (as pictured below). Samsung side-by-side refrigerators are equipped with a water filter, which is positioned on the fresh food side of the bottom drawer on the right-hand side of the unit.

Step 4: Prepare the Filter for Installation

Simple removal of the plastic wrapping and removal of the top cap are all that is required to ready the filter for installation. A well designed filter will look something like this.

Step 5: Install the Samsung Water Filter

Simply remove the filter’s plastic wrapper and unscrew the top cap to get it ready for installation. The following is an example of a prepared filter:

Step 6: Purge 1 Gallon of Water

1 gallon of water should be sent through the filter. For the first 3-5 seconds, you may hear some air in the lines. This is quite normal. Remove the water from the container. It’s now time to put your water dispenser to work!

Step 7: Reset the Change Water Filter Indicator

By pressing and holding the Crushed Ice button for three seconds, you can reset the Change Water Filter Indicator light. Do you need assistance with the water dispenser or ice maker on your Samsung refrigerator? For Samsung Certified Care on your refrigerator, get in touch with Unique Repair Services.

How to Install Samsung Refrigerator Water Filter DA29-00020A

You’re thinking of replacing your own water filter, right? That’s a great concept! Replacing your refrigerator water filter on your own may save you a significant amount of time and money. Let’s get started. The entire procedure should take no more than 10 minutes if everything is done correctly. First and foremost, you’ll want a replacement air filter for your system. Replacing water filters may be obtained from a variety of sources, including your local appliance parts store, Lowe’s, or an internet vendor such as Amazon.com.

The steps outlined below illustrate how to replace the Samsung Refrigerator Water Filter DA29-00020B in your refrigerator.

This filter is also compatible with a limited number of Kenmore refrigerators (see below).

How to Change Samsung Water Filter DA29-00020B

Step 1: Locate the model number of your refrigerator. Model numbers are situated within the refrigerator, most frequently on the left side wall of the appliance. The following are examples of Samsung refrigerator models that are compatible with the DA29-00020B filter: Fits Refrigerators from Samsung

  • 1. Locate the model number for your refrigerator. Model numbers are situated within the refrigerator, most often on the left side wall of the unit. The following are some examples of Samsung refrigerator models that are compatible with the DA29-00020B filter. Fits Refrigerators manufactured by Samsung.

Step 1: Identify the model number of your refrigerator. The model number is situated on the interior of the refrigerator, most commonly on the left side wall. The following Samsung refrigerator models are compatible with the DA29-00020B filter: Fits Samsung Refrigerators are high-quality appliances.

Samsung 6-Month Push-In Refrigerator Water Filter Lowes.com

Prices, promotions, styles, and availability are subject to change without notice. We do not honor online prices at any of our local locations. Prices and availability of products and services are subject to change at any time and without prior notification.

If any mistakes are discovered, they will be addressed, and Lowe’s has the right to rescind any advertised offer and rectify any errors, inaccuracies, or omissions, even after an order has been submitted, without prior notice.

  • Prices, promotions, styles, and availability are all subject to change without prior notice. We do not honor online pricing at any of our local locations. Prices and availability of products and services are subject to change at any time and without prior notification to customers. Lowe’s maintains the right to rectify any mistakes, inaccuracies, or omissions, even after an order has been made, and to withdraw any stated offer and to correct any errors, inaccuracies, or omissions.
  • You can pause or cancel at any time. Find Out More
  • 3 months, 6 months, 9 months, and 12 months are all possible.

OVERVIEW

With this Samsung refrigerator water filter for your Samsung French Door and Side-by-Side refrigerators, you’ll be able to drink water that tastes better than ever. In addition to lead and mercury, chlorine, DEET, medicines, herbicides, and pesticides are all reduced by the ultra-high-grade carbon block from Samsung. With a 6-month life span and a small design, this Samsung refrigerator water filter provides long-lasting usage while also being simple to install and maintain.

  • In addition to removing up to 99 percent of impurities, high-grade carbon block safeguards the inside components of your refrigerator against possible silt. The filter can remove up to 80 percent more pollutants than other leading suitable filters
  • And Warning: Samsung will not cover any damage caused by a non-genuine Samsung filter under the terms of its warranty. Standard 42, 53, and 401 of the National Sanitation Foundation (NSF) are recognized for their ability to remove up to 99 percent of certain chemicals, medicines, pesticides, and herbicides, as well as heavy metals. There is no removal of minerals that are potentially advantageous to health. The tank has a capacity of 300 gallons. DA29-00020B is the replacement code.

Specifications

Prop 65 is a warning to California residents (s) Compatible with top-freezer refrigeratorsBrand and model compatibility Samsung Particulates are filtered out (Class I) Refrigerators that are side-by-side are compatible with this product. It is designed to fit bottom-freezer refrigerators. It is designed to fit French Door Refrigerators. P-Dichlorobenzene is a chemical that is filtered. Reduces the taste and odor of chlorine.

How To Change Your Samsung Fridge Water Filter

Samsung refrigerators are among of the most popular in Australia. Homeowners like the built-in usefulness of their cabinets because of the diverse selection of functions and styles available. On a daily basis, the Samsung refrigerator filter supplies your family with clean, fresh, filtered water and ice. Each Samsung water filter has a lifespan of around six months, however some may need to be replaced sooner if they are used often or if the water is exceptionally harsh. The fact that your Samsung refrigerator’s filter indication light has begun to illuminate indicates that it is time for you to replace your old filter with a new one.

Where Is the Water Filter on My Samsung Fridge?

In order to purchase a new Samsung water filter, you must first determine the model of Samsung water filter you currently own. You will be able to purchase the appropriate replacement because of this. Discount Fridge Filters assists clients in locating the appropriate filter for their refrigerators depending on the model number of the refrigerator. Other brands of refrigerator filters may be used to replace the filter in a Samsung refrigerator and perform just as well; however, you must know the model number of your refrigerator in order to obtain suitable fridge filters.

If you are having trouble identifying the model number of your Samsung water filter, you may watch the video below.

It is possible for your water filter to be installed in three different locations.

In some versions, the water filter will be located on the top right inside or at the back of the refrigerator. If you are unable to locate your water filter or identify the model number of your refrigerator, you can always get in touch with us at Discount Fridge Filters for assistance.

Do You Have To Turn Water Off To Change Your Samsung Refrigerator Filter?

Samsung refrigerators with internal filters are equipped with an auto shut off valve, which eliminates the need to turn off the water to change the filter. Because customers have experienced installation issues as a result of shutting off the water, causing air locks and other issues, we do not recommend shutting off the water supply. When customers turn the water supply back on, they may experience sputtering water or even no water coming out of the faucet. Samsung refrigerators with external filters, on the other hand, nearly usually require the water to be turned off before the filters can be swapped out or replaced.

If this is the filter you require, turning off the water supply is a critical step in ensuring that you do not have a flood of water from this connection when changing your filter.

However, reducing pressure by dispensing some water is usually always a preferable choice.

How To Change An Internal Water Filter on a Samsung Refrigerator

Determine the placement of the water filter in your refrigerator. 2. Remove the old filter by lifting the protective cover (if your filter type has one) and turning it counter-clockwise to dislodge it. Alternatively, if it is difficult to lift, it is possible that pressure has built up; dispense some water and try to relax it before tugging it again. 3. Take your new filter out of the packing and remove the protective cover from it. 4. Press in the new filter and spin it clockwise until its lock symbol is aligned with the arrow.

  • Replace the old filter.
  • Replace the filter cap, if your filter type has one, and run several litres of water to confirm that the water has been adequately filtered and that any air has been drained out of the line.
  • This assures that there will be no leaks in the future.
  • Reset the filter-indicator light on the inside of your refrigerator.
  • The indicator light should return to its original state of green.
  • You may also go to the user manual that came with your Samsung refrigerator for complete instructions on how to change the water filter and reset the indication light on the refrigerator.
You might be interested:  How To Disable Samsung Pass

How To Change An External Water Filter on a Samsung Refrigerator

1. Locate the isolation valve, which should be situated somewhere along the water supply line to the refrigerator. Turn it off if it’s on. Using the water outlet located near the refrigerator, depressurize the system by drawing a large glass of water. 2. Have a bucket and a towel handy in case there is a tiny amount of water spilled throughout the operation. The old filter should be removed by depressing the locking collars at either end of the filter with your thumb nail (or something similar) while simultaneously pulling out the water supply line from the filter.

  • It is possible to hold down the locking collar with your fingers or with a solid edged item, which will allow the hose to slip out with relative ease.
  • We recommend that you use a sharp object, such as a Stanley knife.
  • 4.
  • For this, you may either place the filter under a running faucet and let the water to flow directly into a sink, or you can submerge the filter in a bucket or other container of water.
  • 5.
  • The line will go in approximately 5 – 10mm and you will be able to fully put the filter into place.
  • After you’ve placed the filter in the bucket, switch on the water supply and allow approximately 5 litres of water to run through the filter and into the container.

After you have turned off the water supply, connect the line that flows into the refrigerator.

7.

8.

If the filter light on your Samsung refrigerator does not come back on, press and hold the “Ice Type” or “Moisture Control” buttons as well as the Child Lock button for three seconds.

Avoid holding the buttons for an excessive amount of time, since this may force the procedure to restart, requiring you to release all of the buttons and hold them again until the light changes to green again.

You may also go to the user manual that came with your Samsung refrigerator for complete instructions on how to change the water filter and reset the indication light on the refrigerator.

Can I Run My Samsung Refrigerator Without the Water Filter?

Water filters are designed to eliminate toxins such as lead, mercury, chlorine, and other contaminants from your drinking water and ice, among other things. The majority of Samsung refrigerators may still work well even if they do not have a water filter installed. In spite of the fact that rotary valves in your refrigerator may bypass the water filter and provide you with water even when there isn’t a water filter installed, this does not imply that you should continue to use your Samsung refrigerator in this manner.

At first, you may be unsure about how to replace your water filter.

In the event that you do not change your old filter after 6 months, you may face mineral buildup, which may result in your refrigerator experiencing costly malfunctions.

Tips on How to Change Your Samsung 3G 3F Filter Head Alignment

A misaligned head of a Samsung 3G 3F water filter might cause difficulties if the filter is used. If you have a Samsung 3G 3F water filter, you may face problems if the head gets misaligned. We have covered the basics of this straightforward repair procedure in a few steps. You may quickly correct the alignment of your water filter by watching the video provided below.

Where Can I Buy a Samsung Refrigerator Water Filter?

At Discount Fridge Filters, we can assist you in selecting the appropriate filter and ensuring that it is compatible with the Samsung refrigerator model that you have purchased. On the market, there are many different types of water filters to choose from, and you can save money by selecting one from our extensive inventory. Please do not hesitate to contact us at any time if you want assistance in selecting the appropriate water filter. Now that you’re ready to replace your Samsung water filter, check outDiscount Fridge Filters’s selection of Samsung fridge filtershereand make an order for a new filter right now!

How to Replace the Water Filter on Your Samsung Family Hub Smart Refrigerator

If you have a Samsung Family Hub refrigerator, you can be certain that your home food chilling is of the highest quality. Apart from having a fantastic four-door refrigerator and freezer, you also have a smart fridge equipped with an interactive tablet that is ready to become a regular part of your kitchen lifestyle. Whatever your cooking experiences have been transformed by the Samsung Family Hub or whether it has simply provided you with an upright nearby tablet is a matter of personal preference.

Your Family Hub refrigerator isn’t kidding when it informs you that it’s time to replace the water filter in the unit.

It varies from family to family whether it takes a few months or more than a year to complete this task.

However, it is critical to be prepared in the event that a warning is sent. This article will take you step by step through the process of replacing the water filter in your Samsung Family Hub Refrigerator.

Why Replace Your Water Filter On Time?

The first thing to remember is that it is critical to replace your water filter on a regular basis and at the appropriate time. Water filters only operate for as long as they are capable of filtering water, and ultimately their filtration capacity is depleted and they are no longer effective. Not only does this cause the water filter to cease functioning properly, but it also has the potential to introduce filtering media into the water itself, causing it to become contaminated. If you’ve ever seen small black specks in the water coming from an older refrigerator, it’s likely that the flecks are coming from an old, unmodified filter.

A delay of a few days or even a week is likely to be safe, but a wait of many months might result in substantial filter and water quality degradation.

Order the Correct Replacement Filter

The first step is to make an order for the appropriate replacement air filter. The Samsung brand water filters are strongly recommended, and we strongly advise that you thoroughly research and identify the component number for the water filter that your Samsung Family Hub utilizes. Please double-check compatibility before purchase to ensure that you are ordering the correct size for your device. We also recommend that you get a multi-pack of filters and put the spares in a cabinet close by for convenience.

Being well-prepared makes the procedure simpler the next time it occurs.

Locate the Water Filter: This Part Is Easy

In the past, refrigerator water filters were difficult to come by and maintain, but Samsung has done us a favor by making this process exceedingly simple and straightforward. When you open your Samsung refrigerator, you’ll find the water filter positioned practically in the center of the door, near the bottom of the top compartment, if that makes any sense. We’ll help you through the process. The top doors of your Samsung Family Hub refrigerator should be opened on both sides. Look down between the two produce drawers on the bottom shelf.

That is the water filter you are using.

Twist the Old Water Filter to the Left and Remove

The past has made finding and maintaining refrigerator water filters a difficult task; however, Samsung has done us a favor by making this process very simple. Your Samsung water filter is placed near the bottom of the top compartment, which is practically in the center of the fridge, if that makes any sense at all.

The process will be explained to you. In your Samsung Family Hub refrigerator, open the top doors on both sides. Check the area between the two produce drawers on the bottom shelf. An object with a few symbols is located in the center. In this case, the filter is for your water.

Insert the New Water Filter Into the Slot

Take your new water filter out of the package. It should be taken out of its packing, including the box, and then the plastic protective cap should be removed from the end. Because it is where the filtered water enters and exits, it seems natural that Samsung would want to keep it safe from contamination while in transit to the customer. Once the cap has been removed, put the replacement water filter into position so that the ridge is horizontally aligned. Make a few gentle wiggles with the new water filter until it feels like it has found its proper position within the water filter housing.

Twist the New Water Filter Right to Lock

In order to secure the new water filter in place, you will need to perform the opposite of your prior activity. Twist the water filter to the right while holding the ridge in place. When the symbols on the housing and the ridge on the back of the water filter match up with each other visually near your palm, you should feel the new water filter lock into place.

Run One or More Gallons of Water Through the New Filter

Reverse your previous operation in order to ensure that the new water filter is securely fastened. Twist the water filter to the right while holding the ridge in your hands. When the symbols on the housing and the ridge on the back of the water filter line up visually with each other near your palm, you should feel the new water filter lock into place.

You might be interested:  What Does Sc Mean On Samsung Washer

Reset the Water Filter Indicator on the Smart Screen

When you’re finished, you may notify the Family Hub smart screen that the water filter has been replaced. When you see the alert screen, you will notice a button that allows you to acknowledge the replacement while also resetting the countdown. This will either count the amount of time or the number of gallons of fridge-filtered water that your family consumes before your water filter has to be changed again. Contact us now for more fantastic appliance care, repair, and maintenance ideas, or browse through our blog archive for further information right away.

Replacements for Samsung Refrigerator Water Filters

NSF-certified replacements for the Samsung refrigerator water filter Certified for the reduction of dangerous compounds such as chlorine, lead, cysteine, benzene, and other chemicals. Samsung DA29-00020B, DA29-00020A, HAF-CIN/EXP, DA97-08006A/B, DA29-00019A, RF28HMEDBSR, RF298HDRS, RF263TEAES, RF4287HARS, DA29-00003G, DA29-00003B, DA29-00003A, HAF-CU1, DA97-06317A There is no need to be concerned about any water leaks because our cartridge is a perfect match for the original. We are well-known as a competent and dependable filter producer, and we offer our water filters straight from the factory.

We are fully aware that our reasonability is based on providing value for every individual who contributes to the production of our water filters, as well as for the earth on which we live.

We made the decision to donate one day’s worth of clean drinking water to children in less-developed countries who are in severe need.

We believe that this is the very minimum that we can do to make the world a better place. ** The water filter is not provided by or sponsored by any of the above-mentioned companies. The names of the manufacturers and model numbers have been included solely for the purpose of illustration.

How to Reset Filter Light on Samsung Fridge [A Step-by-Step Guide For You]

It is standard on the vast majority of Samsung refrigerators to include filter light indicators, which inform users when it is time to replace the water filter. Moreover, after changing the filter in your Samsung refrigerator, you will have to reset the filter light on the appliance. What, though, is the reason behind this? Generally speaking, a water filter may be used for a maximum of six months before it has to be replaced. Waterline replacement could be essential, though, depending on what sort of water is passing through the waterline in question.

Unless and until you detect a difference in flavor that you would not have noticed without the filter light, you will be unable to identify whether or not your filter requires replacement.

You may also be interested in:How to Reset Your Samsung Refrigerator When you open the door of your Samsung refrigerator, the noise stops.

The Operation of the Samsung Water Filter Indicator

In excellent functioning condition, the Samsung water filter will exhibit a blue or green color, depending on the type that you have installed on your system. The hue changes to orange or light pink after 5 months or 450 gallons of water has been added. This hue shift is typically a sign that it is time to upgrade the water filtration system in your home or business. After 6 months or 500 gallons of water have been utilized, the water filter indicator will turn red on your water filter. When you see this red light, it indicates that it is time to replace the water filter.

Furthermore, if you reside in a place where there is an excessive amount of limescale in the water supply, you will need to change your water filter more frequently than every six months.

Indicator for the presence of a water filter

After five months or 450 gallons of water, the water filter indicator light must first become orange, and then red after six months or 500 gallons of water. After turning orange, the light must next turn red. The hue of the light is determined on the model that you have purchased. It might be either green or blue in color. Identifying the multi-function button or buttons on your display that control the water filter indicator is required in order to restore the water filter indication to its default state.

Exemplifications of Various Models

Please keep in mind that the models shown in the images below are merely a few examples of the many different designs available. Take a look at the digital display panel on your refrigerator and look for traits that are similar to these.

What you need to know about how to reset the filter light on a Samsung refrigerator (steps to follow on different models)

Holding down the FILTER RESETbutton for about two seconds is required while operating a Samsung refrigerator to turn off the red filter symbol located on the door of the refrigerator. Consult your refrigerator’s owner’s handbook if you are unable to locate the FILTER RESET button, which is usually placed on the dispenser controls (on the front of your refrigerator). Other versions can only be operated by pressing and holding down either the “WATER FILTER” button or the “ICE/WATER” button for three seconds at a time.

To assist you in getting back on track, we’ve discussed the right Samsung refrigerator water filter reset strategy for each model in the following sections, as the Samsung refrigerator water filter reset technique varies depending on model (typical steps).

Samsung refrigerator model RF28K9070SR has a filter reset.

If you have an RF28K9070SR model, you may reset the filter by pressing and holding the ICE-MAKER button for roughly 3 seconds after turning it off. As a result of performing this step, the filter indicator will be reset.

Resetting the filter light on a Samsung model RF23J9011SG/AA – instructions

It is necessary to hold down the CRUSHED/HOLD button on your RF23J9011SG/AA for three seconds in order to reset the water filter light on your device. Instead of remaining on, the color of its indicator should go from red to OFF instead of remaining on. The following are the steps to follow in order to reset the water filter on a Samsung refrigerator with a French door style. There are Samsung refrigerators available, such as the Samsung refrigerator RF260/BEAESR/AA. Samsung refrigerators are also available.

You should bear in mind that, in order to activate the internal controls on devices with internal controls, you must simultaneously press and hold the buttons FRIDGE+POWER COOL for a total of three seconds.

Model DA29-00003G of the Samsung refrigerator has a filter reset light.

The ALARM/HOLD button must be held down for three seconds while the replacement warning light is turned off to reset it.

Model number RF24R7201SR/AA of the Samsung refrigerator.

It is recommended that you push and hold the FILTER RESET button (for 3 seconds) if you have just replaced the filter in your Samsung RF24R7201SR/AA refrigerator to turn off the reset signal on the refrigerator.

Samsung refrigerator water filter reset RF28K9070SR/AA

In order to clear the water filter message, the CRUSHED ICE button must be pushed and held down for three seconds.

RF23J9011SR is the Samsung refrigerator filter reset code.

The water filter alarm on a Samsung refrigerator with model number RF23J9011SR may be reset by pressing and holding the button “CRUSHED/HOLD” for three seconds.

RF263BEAESR is the Samsung refrigerator filter reset code.

If your RF263BEAESRSSamsung refrigerator water filter does not reset automatically, the following process should be followed: Press and hold the ICE TYPE/WATER button on the controller for three seconds to activate it.

Instructions for resetting the Samsung RF28R7351SG water filter (applies for most 4 doors Samsung refrigerators)

In order to reset the warning signal, the CRUSHED LIGHT INDICATOR button must be pushed and held down for three seconds.

If the reset light signal does not turn off, there are some other options to attempt.

Briefly said, if replacing the filter does not result in the red light going off, you can also try the following steps:

  • Check to determine whether any of the buttons are currently locked
  • Please double-check that the buttons are actually “unlocked,” or else the Samsung refrigerator filter reset process will not work properly.

Alternatively, you may refer to your guide book once again for the procedures on how to unlock the controls if you desire them. It is conceivable that the filter alert light is still flashing because the freshly fitted filter was not put in the right location. Open the door, take a look at the fitting, and check sure everything is in its proper place.

  • Double-check to make sure the correct filter was installed. As a final option, if you did not use an authorized product, the light notification might not go and you might have to switch out the new filter in order for the system to function properly again.

OUR FINAL THOUGHTS

Inspect the installation to ensure that the right filter was used. The light notification may not go away if you did not use a valid product; in this case, you may need to switch out the new filter in order to get it to operate again as a last option.

FREQUENTLY ASK QUESTIONS

Pressing and holding down either of the buttons on the side of the refrigerator for three seconds each is the most common method of resetting the Samsung refrigerator water filter. The FILTER RESET button may be found on the right-hand side of the screen, at the bottom.

It is possible to use either the “WATER FILTER” button or the “ICE/WATER” button. If, on the other hand, your Samsung refrigerator filter light does not reset, then check to see if the buttons have been locked and then unlock them before attempting to reset the light again.

What is the procedure for turning off the filter light on my Samsung?

Identifying the multi-function button or buttons on your display that control the water filter indicator is important in order to restore the water filter indication to its default state. Once you have done this, press and hold the button(s) for a few seconds until the light turns green.

What is causing my Samsung refrigerator’s filter light to not reset?

For the water filter indicator to return to its default setting, you must first identify the multi-function button(s) on your display that controls the indicator’s function. Then, for a few seconds, press and hold the button(s) until the light turns green on.

Leave a Reply

Your email address will not be published. Required fields are marked *